summaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Collapse)AuthorAgeFilesLines
* builds nowMatt Ettus2011-06-072-2/+4
|
* first cut at using lvds for adc pinsMatt Ettus2011-06-072-2/+3
|
* u2p-rebase: go back to versions on nextMatt Ettus2011-05-262-5/+4
|
* B100: added some packet splitter debug pins, removed debug from GPIO port, ↵Nick Foster2011-05-265-16/+24
| | | | swapped I&Q in interleaver
* u1p: reset gpifMatt Ettus2011-05-262-4/+6
|
* u1p: connect frames per packetMatt Ettus2011-05-261-1/+1
|
* u1p: implement a signal to indicate a partially full usb lut, to flush itMatt Ettus2011-05-267-22/+175
|
* u1p: need to declare wiresMatt Ettus2011-05-261-0/+1
|
* u1p: vita packet generator for testing purposesMatt Ettus2011-05-264-4/+48
|
* should split and reframe packets properlyMatt Ettus2011-05-262-27/+58
|
* u1p: do padding outside of gpif_rd, in packet_splitterMatt Ettus2011-05-265-14/+188
|
* u1p: should fix underrun reportingMatt Ettus2011-05-261-1/+1
|
* u1p: modify dsp_framer36 to allow it to skip the udp prot eng headers.Matt Ettus2011-05-261-1/+1
| | | | This way it works with u1e, u1p, as well as u2/u2p
* u1p: add new file to buildMatt Ettus2011-05-261-0/+1
|
* u1p: modernize, fix warnings, debug pinsMatt Ettus2011-05-261-22/+10
|
* u1p: debug pinsMatt Ettus2011-05-263-6/+9
|
* u1p: unused signalsMatt Ettus2011-05-261-4/+0
|
* u1p: better way of reframing the packetsMatt Ettus2011-05-263-5/+83
|
* u1p:wr testbenchMatt Ettus2011-05-261-0/+86
|
* u1p: use 18 bit fifos and use full size of a block ram in the tx pathMatt Ettus2011-05-262-13/+19
|
* u1p: gpif-to-fx2 path should now handle arbitrary sized packets, up to 2KBMatt Ettus2011-05-261-22/+29
|
* u1p: pass tx status/error packets back through GPIF over the response ↵Matt Ettus2011-05-265-18/+106
| | | | channel (short packets)
* u1p: added loopback and timed capability just like u1eMatt Ettus2011-05-263-28/+111
|
* u1p: revert change to address bus widthMatt Ettus2011-05-261-2/+2
|
* u1p: use icarus verilog to find warningsMatt Ettus2011-05-262-0/+4577
|
* u1p: fix bus widths and other warningsMatt Ettus2011-05-265-52/+53
|
* u1p: added debug0, debug1 for GPIF debuggingNick Foster2011-05-261-0/+3
|
* u1p: add clear ports to gpif, not hooked up yetMatt Ettus2011-05-261-1/+1
|
* u1p: remove extram from MakefileNick Foster2011-05-261-1/+0
|
* u1p: catch up with all the recent u1e changesMatt Ettus2011-05-261-107/+91
|
* modernize the make files, it now compiles. not tested.Matt Ettus2011-05-262-56/+10
|
* select bus is 2 bits wideNick Foster2011-05-261-1/+1
|
* I2C slave address decoding for 16-bit dw instead of 32-bitNick Foster2011-05-261-1/+1
|
* Fixed I2C pin names.Nick Foster2011-05-261-1/+1
|
* add padding into gpif response pathMatt Ettus2011-05-263-4/+16
|
* pad out packets to a minimum lengthMatt Ettus2011-05-262-1/+76
|
* fixed length command packetsMatt Ettus2011-05-261-1/+1
|
* give response packets the same format as tx packetsMatt Ettus2011-05-261-1/+13
|
* successful testMatt Ettus2011-05-261-0/+104
|
* old and unusedMatt Ettus2011-05-261-151/+0
|
* put gpio back inMatt Ettus2011-05-261-4/+3
|
* fifo to wb should be functionally complete, needs testingMatt Ettus2011-05-263-34/+150
|
* not usedMatt Ettus2011-05-261-16/+0
|
* fix ctrl/resp path to pass all 16 bits of data instead of the bottom bitMatt Ettus2011-05-263-38/+47
| | | | | typos fixed, everything is connected now, should just have off-by-1 error lots of debug pins added
* send reset to the gpifMatt Ettus2011-05-261-2/+3
|
* constrain the gpif clockMatt Ettus2011-05-261-0/+3
|
* first steps to a command packet handler for u1+Matt Ettus2011-05-262-0/+17
|
* redone gpif interface to match nick's new specMatt Ettus2011-05-264-62/+125
|
* use vita_tx_chain top level blockMatt Ettus2011-05-261-22/+14
|
* hook up flow control pinsMatt Ettus2011-05-261-2/+10
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 07:45:49 +0000