summaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Expand)AuthorAgeFilesLines
* don't overwrite checksum valuesMatt Ettus2010-12-211-7/+8
* udp_ports: set the source port and destination port from tableJosh Blum2010-12-171-12/+16
* generate port number headers in the dsp error unitsMatt Ettus2010-12-154-8/+12
* now supports up to 4 different udp portsMatt Ettus2010-12-152-23/+43
* time sync on usrp2 as well, added debug pins to time sync.Matt Ettus2010-12-102-2/+10
* slave side can now syncMatt Ettus2010-12-102-13/+33
* Only do udp now, renamed old ports to exp_time_*Matt Ettus2010-12-092-2/+2
* udp is now the defaultMatt Ettus2010-12-092-2/+2
* remove old raw ethernet versionMatt Ettus2010-12-092-882/+0
* reimplemented mimo time transfer to handle 64 bits. Still needsMatt Ettus2010-12-095-71/+164
* renamed exp_pps_* to be exp_time_*, which is the mimo synchronization signalMatt Ettus2010-12-095-22/+22
* Merge branch 'time_compare_speedup' into ise12Matt Ettus2010-12-091-2/+16
|\
| * should safely delay the late signal which was causing timing problemsMatt Ettus2010-12-061-2/+16
* | u2plus: clock lock pin capitalization failNick Foster2010-12-062-2/+2
|/
* packets are shorter now, so we need to tell the udp state machine that...Matt Ettus2010-11-231-1/+1
* no need for second sequence number anymore. Each dsp tx chainMatt Ettus2010-11-212-11/+8
* shouldn't be executableMatt Ettus2010-11-201-0/+0
* modernize the testbenchMatt Ettus2010-11-191-18/+30
* get rid of extraneous U messages when we actually had an ACKMatt Ettus2010-11-182-7/+10
* fix problem with consecutive timed packets on txMatt Ettus2010-11-181-2/+0
* simplify time comparison to speed up logic and meet fpga timingMatt Ettus2010-11-132-4/+27
* we're still on version 12.1Matt Ettus2010-11-132-2/+2
* Add flow control and other small vrt fixes to u2p, minor cleanupsMatt Ettus2010-11-112-34/+38
* reset properlyMatt Ettus2010-11-111-0/+1
* compiles with new file locationsMatt Ettus2010-11-111-1/+1
* handle zero-length packets properlyMatt Ettus2010-11-113-55/+76
* clear out the vita tx chain and the tx fifo. need to check the fifoMatt Ettus2010-11-115-24/+25
* added ability to truly clear out the entire rx chain. also removed old style...Matt Ettus2010-11-113-29/+27
* gray code address for emiMatt Ettus2010-11-111-1/+7
* fifo randomizer for emiMatt Ettus2010-11-115-4/+108
* now handles frames larger than the vita packet (i.e. with padding)Matt Ettus2010-11-111-6/+16
* don't clear out following packets on an eob ackMatt Ettus2010-11-111-1/+1
* don't flag an error on eob ackMatt Ettus2010-11-111-1/+1
* proper triggering for interrupts generated on the dsp_clkMatt Ettus2010-11-111-1/+8
* cleanup for 32 bit seqnumMatt Ettus2010-11-111-4/+3
* increase compatibility number for flow controlMatt Ettus2010-11-111-1/+1
* switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rateMatt Ettus2010-11-113-14/+16
* send message on eob to ack the end of transmissionMatt Ettus2010-11-111-1/+6
* typo which isn't caught by xilinxMatt Ettus2010-11-111-1/+1
* separated flow control and error reporting on tx path. should work with and ...Matt Ettus2010-11-114-25/+43
* go to the correct stateMatt Ettus2010-11-111-3/+3
* add a fifo to the end of the mux to help in timing.Matt Ettus2010-11-111-6/+13
* add trigger to makefileMatt Ettus2010-11-111-0/+1
* assign setting reg addressesMatt Ettus2010-11-111-2/+2
* declarationsMatt Ettus2010-11-111-2/+3
* checkpoint in flow control packet generationMatt Ettus2010-11-115-42/+147
* these got dropped during the rebaseMatt Ettus2010-11-114-31/+37
* Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl...Ian Buckley2010-11-111-49/+4
* 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable fu...Ian Buckley2010-11-1111-11/+555
* 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZIan Buckley2010-11-114-11/+17
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 12:35:34 +0000