summaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Expand)AuthorAgeFilesLines
* Merge branch 'time_compare_speedup' into ise12Matt Ettus2010-12-091-2/+16
|\
| * should safely delay the late signal which was causing timing problemsMatt Ettus2010-12-061-2/+16
* | u2plus: clock lock pin capitalization failNick Foster2010-12-062-2/+2
|/
* packets are shorter now, so we need to tell the udp state machine that...Matt Ettus2010-11-231-1/+1
* no need for second sequence number anymore. Each dsp tx chainMatt Ettus2010-11-212-11/+8
* shouldn't be executableMatt Ettus2010-11-201-0/+0
* modernize the testbenchMatt Ettus2010-11-191-18/+30
* get rid of extraneous U messages when we actually had an ACKMatt Ettus2010-11-182-7/+10
* fix problem with consecutive timed packets on txMatt Ettus2010-11-181-2/+0
* simplify time comparison to speed up logic and meet fpga timingMatt Ettus2010-11-132-4/+27
* we're still on version 12.1Matt Ettus2010-11-132-2/+2
* Add flow control and other small vrt fixes to u2p, minor cleanupsMatt Ettus2010-11-112-34/+38
* reset properlyMatt Ettus2010-11-111-0/+1
* compiles with new file locationsMatt Ettus2010-11-111-1/+1
* handle zero-length packets properlyMatt Ettus2010-11-113-55/+76
* clear out the vita tx chain and the tx fifo. need to check the fifoMatt Ettus2010-11-115-24/+25
* added ability to truly clear out the entire rx chain. also removed old style...Matt Ettus2010-11-113-29/+27
* gray code address for emiMatt Ettus2010-11-111-1/+7
* fifo randomizer for emiMatt Ettus2010-11-115-4/+108
* now handles frames larger than the vita packet (i.e. with padding)Matt Ettus2010-11-111-6/+16
* don't clear out following packets on an eob ackMatt Ettus2010-11-111-1/+1
* don't flag an error on eob ackMatt Ettus2010-11-111-1/+1
* proper triggering for interrupts generated on the dsp_clkMatt Ettus2010-11-111-1/+8
* cleanup for 32 bit seqnumMatt Ettus2010-11-111-4/+3
* increase compatibility number for flow controlMatt Ettus2010-11-111-1/+1
* switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rateMatt Ettus2010-11-113-14/+16
* send message on eob to ack the end of transmissionMatt Ettus2010-11-111-1/+6
* typo which isn't caught by xilinxMatt Ettus2010-11-111-1/+1
* separated flow control and error reporting on tx path. should work with and ...Matt Ettus2010-11-114-25/+43
* go to the correct stateMatt Ettus2010-11-111-3/+3
* add a fifo to the end of the mux to help in timing.Matt Ettus2010-11-111-6/+13
* add trigger to makefileMatt Ettus2010-11-111-0/+1
* assign setting reg addressesMatt Ettus2010-11-111-2/+2
* declarationsMatt Ettus2010-11-111-2/+3
* checkpoint in flow control packet generationMatt Ettus2010-11-115-42/+147
* these got dropped during the rebaseMatt Ettus2010-11-114-31/+37
* Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl...Ian Buckley2010-11-111-49/+4
* 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable fu...Ian Buckley2010-11-1111-11/+555
* 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZIan Buckley2010-11-114-11/+17
* Defaulted all SRAM pins to LVCMOS25 8mA FASTIan Buckley2010-11-111-67/+67
* Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by defaultIan Buckley2010-11-112-7/+23
* Added external RAM FIFO to u2plus.Ian Buckley2010-11-1120-100/+4498
* revert unneeded changes and incorrect commentsMatt Ettus2010-11-112-34/+34
* reconnect GPIOs, remove debug pins, meets timing nowMatt Ettus2010-11-111-5/+3
* Modified phase shift of DCM1 to -64 which is intended to give more timing mar...Ian Buckley2010-11-111-1/+1
* Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S...Ian Buckley2010-11-111-12/+12
* Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i...Ian Buckley2010-11-114-5/+100
* Enhanced test bench to be more like real world applicationIan Buckley2010-11-112-7/+14
* hangedddddddextrnal fifo size to use full NoBL SRAMianb2010-11-111-1/+1
* Corrected extfifo code so that all registers that are on SRAM signals are pac...ianb2010-11-115-46/+59