| Commit message (Expand) | Author | Age | Files | Lines |
* | progress on synchronous gpmc, but it may not be possible due to the limited n... | Matt Ettus | 2010-04-15 | 3 | -43/+45 |
* | synchronous and asynchronous gpmc models | Matt Ettus | 2010-04-15 | 3 | -3/+100 |
* | handle all tri-state in the top level of gpmc | Matt Ettus | 2010-04-15 | 3 | -6/+8 |
* | more sync progress. This is just a skeleton for now, with junk content | Matt Ettus | 2010-04-14 | 1 | -0/+56 |
* | more progress on synchronous interface | Matt Ettus | 2010-04-14 | 4 | -26/+95 |
* | renamed to async. Will be building a sync version for GPMC_CLK | Matt Ettus | 2010-04-14 | 2 | -3/+3 |
* | make timing diagrams for bus transactions. Still need to do reads | Matt Ettus | 2010-04-14 | 5 | -0/+46 |
* | added in a loopback fifo | Matt Ettus | 2010-04-14 | 1 | -4/+11 |
* | probably won't be using this, and it hasn't been tested | Matt Ettus | 2010-04-14 | 1 | -0/+46 |
* | minor changes to get it to synthesize | Matt Ettus | 2010-04-13 | 2 | -1/+4 |
* | lengthened delay between cycles, added more transactions on the data bus | Matt Ettus | 2010-04-12 | 1 | -2/+7 |
* | replaced ram interface with a fifo interface. still need to do rx side | Matt Ettus | 2010-04-12 | 3 | -120/+117 |
* | split out gpmc to wishbone interface to make gpmc top level cleaner | Matt Ettus | 2010-04-12 | 1 | -0/+57 |
* | added 16-bit wide atr controller | Matt Ettus | 2010-04-01 | 5 | -47/+117 |
* | 16 bit wide spi core | Matt Ettus | 2010-03-27 | 1 | -0/+182 |
* | connect up the 16 bit spi core | Matt Ettus | 2010-03-26 | 2 | -5/+4 |
* | remove timescale junk | Matt Ettus | 2010-03-26 | 5 | -21/+19 |
* | connect 2 clock gen controls and 3 status pins to the wishbone so they can be... | Matt Ettus | 2010-03-26 | 3 | -8/+26 |
* | Merge branch 'udp' into u1e | Matt Ettus | 2010-03-25 | 32 | -132/+2545 |
|\ |
|
| * | Merge branch 'master' into udp | Matt Ettus | 2010-03-25 | 2 | -3/+1 |
| |\ |
|
| * | | moved fifos around, now easier to see where they are and how big | Matt Ettus | 2010-03-25 | 2 | -17/+30 |
| * | | bigger fifo on UDP TX path, to possibly fix overruns on decim=4 | Matt Ettus | 2010-03-24 | 1 | -2/+11 |
| * | | Xilinx ISE is incorrectly parsing the verilog case statement, this is a worka... | Matt Ettus | 2010-03-24 | 1 | -1/+7 |
| * | | pps and vita time debug pins | Matt Ettus | 2010-03-23 | 1 | -3/+6 |
| * | | more debug for fixing E's | Matt Ettus | 2010-03-10 | 2 | -6/+13 |
| * | | better debug pins for going after cascading E's | Matt Ettus | 2010-03-10 | 1 | -1/+5 |
| * | | copied over from quad radio | Matt Ettus | 2010-02-08 | 1 | -0/+60 |
| * | | Merge commit '8d19387a8642caf74179bdcb7eddf1936f473e53' into udp | Matt Ettus | 2010-01-25 | 4 | -34/+43 |
| * | | just debug pin changes | Matt Ettus | 2010-01-25 | 2 | -1/+12 |
| * | | typo caused the tx udp chain to be disconnected | Matt Ettus | 2010-01-23 | 1 | -1/+1 |
| * | | moved into subdir | Josh Blum | 2010-01-22 | 653 | -0/+1558662 |
| / |
|
* | | connected spi pins, but the spi core still needs to be redone for 16 bit inte... | Matt Ettus | 2010-03-25 | 3 | -40/+60 |
* | | debug pins | Matt Ettus | 2010-02-25 | 1 | -2/+3 |
* | | enable was on the wrong address pin, needs to be the highest order one | Matt Ettus | 2010-02-25 | 1 | -2/+2 |
* | | invert the pushbuttons since they are active low | Matt Ettus | 2010-02-25 | 1 | -2/+2 |
* | | gpmc debug pins | Matt Ettus | 2010-02-25 | 2 | -4/+14 |
* | | point to the new files | Matt Ettus | 2010-02-25 | 1 | -0/+2 |
* | | fix syntax error which icarus allowed (filed a bug with them) | Matt Ettus | 2010-02-25 | 1 | -7/+9 |
* | | loopback and test | Matt Ettus | 2010-02-25 | 2 | -7/+38 |
* | | corrected logic | Matt Ettus | 2010-02-25 | 1 | -17/+7 |
* | | edge sync on done signals so we only fill/empty one buffer | Matt Ettus | 2010-02-25 | 2 | -2/+32 |
* | | Switched xilinx primitives because they order the bits funny in the other one | Matt Ettus | 2010-02-25 | 1 | -48/+79 |
* | | ISE chokes on the pure verilog version so we use the macro | Matt Ettus | 2010-02-25 | 1 | -4/+49 |
* | | First cut at passing data buffers around on GPMC bus | Matt Ettus | 2010-02-25 | 6 | -25/+165 |
* | | Merge branch 'master' into u1e | Matt Ettus | 2010-02-23 | 1 | -1/+1 |
|\| |
|
| * | proper initialization of the ram | Matt Ettus | 2010-02-23 | 1 | -1/+1 |
* | | first cut at making a bidirectional 2 port ram for the gpmc data interface | Matt Ettus | 2010-02-23 | 3 | -6/+63 |
* | | use our fancy new debug ports | Matt Ettus | 2010-02-23 | 1 | -0/+3 |
* | | settings bus with 16 bit wishbone interface, put on the main wishbone in u1e | Matt Ettus | 2010-02-22 | 3 | -3/+68 |
* | | remove the #1 delay in all the regs. They just slow down sims. | Matt Ettus | 2010-02-22 | 4 | -96/+90 |