summaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Expand)AuthorAgeFilesLines
* dsp: fix typosMatt Ettus2011-06-083-14/+14
* dsp: add2_and_clip_reg and round_sd now are now strobed to be compatibleMatt Ettus2011-06-086-26/+46
* u2/u2p: use new rx_frontend in u2 and u2pMatt Ettus2011-06-083-6/+17
* dsp: use sigma delta rounding in rx_dcoffset and in dsp_core_rxMatt Ettus2011-06-082-16/+6
* dsp: reworked round_sd, it is much simpler nowMatt Ettus2011-06-082-34/+14
* dsp: first cut at sigma-delta roundingMatt Ettus2011-06-082-0/+92
* dsp: pass the error through in the rounding functionMatt Ettus2011-06-081-4/+9
* u2/u2p: misc connection and compilation fixesMatt Ettus2011-06-084-20/+22
* unused netsMatt Ettus2011-06-081-1/+0
* u2/u2p: pull IQ balance and dcoffset out of dsp_core, put in frontend moduleMatt Ettus2011-06-084-44/+91
* redone DC offset with sigma-delta quantizationMatt Ettus2011-06-085-27/+80
* fix copyright noticeMatt Ettus2011-06-071-2/+0
* added copyrightsJosh Blum2011-06-07241-0/+4097
* lots of renaming and moving around of toplevel directories to reflect product...Matt Ettus2011-06-0747-994/+0
* remove old ethernet tester, no longer needed or workingMatt Ettus2011-06-074-205/+0
* removed bit-rotted test harnessMatt Ettus2011-06-073-737/+0
* remove old iad stuffMatt Ettus2011-06-0717-2442/+0
* N210: added makefiles in for rev 4 versions (use LVDS)Nick Foster2011-06-076-4/+204
* u2p: FPGA internal termination on the clock line from ADCMatt Ettus2011-06-071-2/+2
* u2p-lvds: remove unused netsMatt Ettus2011-06-071-2/+0
* builds nowMatt Ettus2011-06-072-2/+4
* first cut at using lvds for adc pinsMatt Ettus2011-06-072-2/+3
* u2p-rebase: go back to versions on nextMatt Ettus2011-05-262-5/+4
* B100: added some packet splitter debug pins, removed debug from GPIO port, sw...Nick Foster2011-05-265-16/+24
* u1p: reset gpifMatt Ettus2011-05-262-4/+6
* u1p: connect frames per packetMatt Ettus2011-05-261-1/+1
* u1p: implement a signal to indicate a partially full usb lut, to flush itMatt Ettus2011-05-267-22/+175
* u1p: need to declare wiresMatt Ettus2011-05-261-0/+1
* u1p: vita packet generator for testing purposesMatt Ettus2011-05-264-4/+48
* should split and reframe packets properlyMatt Ettus2011-05-262-27/+58
* u1p: do padding outside of gpif_rd, in packet_splitterMatt Ettus2011-05-265-14/+188
* u1p: should fix underrun reportingMatt Ettus2011-05-261-1/+1
* u1p: modify dsp_framer36 to allow it to skip the udp prot eng headers.Matt Ettus2011-05-261-1/+1
* u1p: add new file to buildMatt Ettus2011-05-261-0/+1
* u1p: modernize, fix warnings, debug pinsMatt Ettus2011-05-261-22/+10
* u1p: debug pinsMatt Ettus2011-05-263-6/+9
* u1p: unused signalsMatt Ettus2011-05-261-4/+0
* u1p: better way of reframing the packetsMatt Ettus2011-05-263-5/+83
* u1p:wr testbenchMatt Ettus2011-05-261-0/+86
* u1p: use 18 bit fifos and use full size of a block ram in the tx pathMatt Ettus2011-05-262-13/+19
* u1p: gpif-to-fx2 path should now handle arbitrary sized packets, up to 2KBMatt Ettus2011-05-261-22/+29
* u1p: pass tx status/error packets back through GPIF over the response channel...Matt Ettus2011-05-265-18/+106
* u1p: added loopback and timed capability just like u1eMatt Ettus2011-05-263-28/+111
* u1p: revert change to address bus widthMatt Ettus2011-05-261-2/+2
* u1p: use icarus verilog to find warningsMatt Ettus2011-05-262-0/+4577
* u1p: fix bus widths and other warningsMatt Ettus2011-05-265-52/+53
* u1p: added debug0, debug1 for GPIF debuggingNick Foster2011-05-261-0/+3
* u1p: add clear ports to gpif, not hooked up yetMatt Ettus2011-05-261-1/+1
* u1p: remove extram from MakefileNick Foster2011-05-261-1/+0
* u1p: catch up with all the recent u1e changesMatt Ettus2011-05-261-107/+91