uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	dsp rework: implemented dsp changes for other top levels	Josh Blum	2012-01-27	4	-100/+127
\| \| \| \|	added user registers into each toplevel (not used yet)
*	dsp rework: renamed dsp signals for frontend IO	Josh Blum	2012-01-27	1	-11/+11
\|
*	dsp rework: u2_core test implementation	Josh Blum	2012-01-26	4	-12/+21
\|
*	n2xx: updated bootloader to latest build in uhd master	Josh Blum	2012-01-11	1	-377/+377
\|
*	usrp2/nseries: restored clock/serdes readback	Josh Blum	2011-11-23	2	-4/+4
\|
*	need more umph out of correction values	Josh Blum	2011-11-10	4	-4/+4
\|
*	remove unused irq to meet timing	Josh Blum	2011-11-05	2	-21/+7
\|
*	convenience makefiles for top level projects	Josh Blum	2011-11-05	2	-0/+31
\|
*	increase vita rx fifosize to 10, like USRP2, make things work	Josh Blum	2011-11-04	2	-4/+4
\|
*	u1e: fix unattached nets from copy-paste error	Matt Ettus	2011-11-04	1	-3/+3
\|
*	b100: fix warnings, complete removal of test code	Matt Ettus	2011-11-04	1	-16/+4
\|
*	u1e/u1p: GPIOs switched over to setting regs	Matt Ettus	2011-10-27	2	-32/+45
\|
*	32 bit compat number for E and B series	Josh Blum	2011-10-26	2	-10/+8
\|
*	u1e/u1p: removed led setting reg	Matt Ettus	2011-10-26	2	-14/+4
\|
*	u1p/u1e: partially redone atr and gpio redo	Matt Ettus	2011-10-26	2	-33/+11
\|
*	u2/u2p: use new setting_reg based gpios, gets it off of wb	Matt Ettus	2011-10-26	2	-17/+27
\|
*	u1e/u1p: remove unused UART	Matt Ettus	2011-10-26	2	-24/+0
\|
*	u2/u2p: move nearly all setting regs onto dsp_clk	Matt Ettus	2011-10-26	2	-30/+37
\|
*	u2/u2p: remove dead comments and code	Matt Ettus	2011-10-26	2	-84/+16
\|
*	usrp2: fix typo in top level core files	Josh Blum	2011-10-26	2	-2/+2
\|
*	connect and map b100 and e100 front-panel leds	Josh Blum	2011-10-11	2	-2/+2
\|
*	E100: GPSDO serial port level conversion	Nick Foster	2011-09-28	2	-2/+9
\|
*	B100: use gpif_misc on R2 hw, invert direction of gpif_misc pins	Nick Foster	2011-09-19	1	-2/+2
\|
*	u1e,u1p: turn off debug pins, misc cleanups	Matt Ettus	2011-09-08	2	-26/+10
\|
*	u1p: proper format in ucf file	Matt Ettus	2011-09-08	5	-4/+474
\| \| \| \|	u1p: build separate u1plus (prototypes) and B100 (release)
*	u1e: relax GPMC constraints, eases P&R	Matt Ettus	2011-09-02	1	-10/+10
\|
*	u1e: separate build for E100 and E110, just a different FPGA	Matt Ettus	2011-09-01	2	-1/+102
\|
*	e100: squashed work on bus implementation on GPMC	Josh Blum	2011-08-29	3	-42/+24
\|
*	fpga: minor tweaks to build system	Josh Blum	2011-08-26	2	-2/+4
\|
*	b100: gpif_rst resynced to gpif_clk	Matt Ettus	2011-08-26	1	-1/+1
\|
*	usrp2: reconnect frontend calibration, timing meets	Josh Blum	2011-08-26	2	-2/+2
\|
*	e100: continuation of the atr fix to get e100 to build	Josh Blum	2011-08-15	1	-2/+2
\|
*	usrp2: bump FPGA minor number to 2 for patch release	Josh Blum	2011-08-15	2	-2/+2
\|
*	N2x0: print constraints summary from makefile	Josh Blum	2011-08-15	1	-0/+1
\|
*	N2x0: added a Makefile to build all N2x0 projects (make -j4)	Josh Blum	2011-08-15	1	-0/+22
\|
*	N2x0: delay ADC A inversion so A and B are latched in the same	Josh Blum	2011-08-15	1	-3/+5
\|
*	B100/E100: fix ATR RX mode pins not connected	Nick Foster	2011-08-10	2	-4/+4
\|
*	usrp2: remove old unused readback mux value	Josh Blum	2011-07-28	2	-2/+2
\|
*	usrp2: bump minor version number for changes	Josh Blum	2011-07-28	2	-2/+2
\|
*	usrp2: fixed swapped tx/rx signals for nsgpio	Josh Blum	2011-07-28	2	-2/+2
\|
*	u2/u2p: apply atr/gpio changes to u2p	Matt Ettus	2011-07-27	2	-14/+7
\|
*	atr: forgot to delete this line	Matt Ettus	2011-07-27	1	-1/+0
\|
*	u2: redo the atr gpio pins, remove some old cruft	Matt Ettus	2011-07-27	1	-7/+17
\|
*	u2p: finish copying over serdes light fix	Matt Ettus	2011-07-22	1	-2/+1
\|
*	u2/u2p: further qualify the serdes link light	Matt Ettus	2011-07-21	2	-7/+6
\|
*	appease the ISE gods	Matt Ettus	2011-07-19	3	-0/+3
\|
*	N200: detailed map report allows you to see what takes up too much space	Matt Ettus	2011-07-19	4	-0/+4
\|
*	fpga: print timing report after generate bin file	Josh Blum	2011-07-19	2	-1/+34
\|
*	b100: fix for fpga syntax error on xfer_rate	Josh Blum	2011-07-19	1	-1/+1
\|
*	Merge branch 'b100_shrink' into new_work	Josh Blum	2011-07-19	9	-257/+306
\|\