summaryrefslogtreecommitdiffstats
path: root/usrp2/top
Commit message (Expand)AuthorAgeFilesLines
...
* Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl...Ian Buckley2010-11-111-49/+4
* 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZIan Buckley2010-11-112-2/+5
* Defaulted all SRAM pins to LVCMOS25 8mA FASTIan Buckley2010-11-111-67/+67
* Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by defaultIan Buckley2010-11-112-7/+23
* Added external RAM FIFO to u2plus.Ian Buckley2010-11-114-7/+123
* revert unneeded changes and incorrect commentsMatt Ettus2010-11-111-32/+32
* reconnect GPIOs, remove debug pins, meets timing nowMatt Ettus2010-11-111-5/+3
* Modified phase shift of DCM1 to -64 which is intended to give more timing mar...Ian Buckley2010-11-111-1/+1
* Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S...Ian Buckley2010-11-111-12/+12
* Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i...Ian Buckley2010-11-114-5/+100
* hangedddddddextrnal fifo size to use full NoBL SRAMianb2010-11-111-1/+1
* Corrected extfifo code so that all registers that are on SRAM signals are pac...ianb2010-11-112-37/+42
* Added a bunch of debug signals.Ian Buckley2010-11-111-4/+5
* Regenerated FIFO with lower trigger level for almost full flag to reflect log...Ian Buckley2010-11-111-1/+2
* External FIFO tested in simulation and on USRP2 from decimation 64->8 with cu...Ian Buckley2010-11-115-142/+201
* Merge branch 'u1e' into merge_u1eMatt Ettus2010-11-1019-0/+1381
|\
| * invert led signals because they are active lowMatt Ettus2010-11-091-1/+1
| * duhMatt Ettus2010-11-041-1/+1
| * better debug pinsMatt Ettus2010-09-232-7/+11
| * watch the ethernet chip select on our debug busMatt Ettus2010-09-233-6/+8
| * fix timing issue on DAC outputs with rev 2. This puts the whole system on a ...Matt Ettus2010-09-212-50/+25
| * send all gpmc signals to mictorMatt Ettus2010-09-164-0/+201
| * updated pins to match rev2, removed dip switch, etc. seems to compile ok.Matt Ettus2010-09-093-137/+130
| * pins are different on rev2Matt Ettus2010-09-091-264/+4
| * fixed makefile to compile with our new systemMatt Ettus2010-09-071-44/+36
| * add register to tell host about compatibility level and which image we are usingMatt Ettus2010-08-301-5/+14
| * move declaration to make loopback compileMatt Ettus2010-08-271-1/+2
| * Merge branch 'tx_policy' into u1eMatt Ettus2010-08-252-7/+10
| |\
| * | no need for protocol headers since we're not doing ethernetMatt Ettus2010-08-241-1/+1
| * | match the signal names in this designMatt Ettus2010-08-231-3/+3
| * | debug pins cleanupMatt Ettus2010-08-231-3/+3
| * | properly integrate the new tx chainMatt Ettus2010-08-191-31/+27
| * | catch up with tx_policyMatt Ettus2010-08-192-30/+28
| * | attach run_tx and run_rx to ledsMatt Ettus2010-08-171-1/+1
| * | connect atrMatt Ettus2010-08-171-1/+1
| * | delay the q channel to make the channels line up on the AD9862Matt Ettus2010-08-171-1/+6
| * | this is necessary for some reasonMatt Ettus2010-08-131-1/+2
| * | connect the setting reg to the real clock and resetMatt Ettus2010-08-111-1/+1
| * | enlarge loopback fifoMatt Ettus2010-08-101-4/+1
| * | Merge branch 'ise12' into u1eMatt Ettus2010-07-192-37/+36
| |\ \
| * | | make loopback compileMatt Ettus2010-07-141-0/+3
| * | | Merge branch 'master' into u1eMatt Ettus2010-06-181-1/+2
| |\ \ \
| * | | | added ability to clear out fifos of tx and rx.Matt Ettus2010-06-171-12/+21
| * | | | Merge branch 'master' into u1e_newbuildMatt Ettus2010-06-148-707/+216
| |\ \ \ \
| * | | | | debug pinsMatt Ettus2010-06-101-3/+6
| * | | | | much bigger fifosMatt Ettus2010-06-101-2/+2
| * | | | | proper overrun, underrun connections, debug pins.Matt Ettus2010-06-101-4/+8
| * | | | | ignoresMatt Ettus2010-06-081-0/+1
| * | | | | debug pinsMatt Ettus2010-06-081-1/+2
| * | | | | Merge branch 'master' into u1eMatt Ettus2010-06-082-2/+2
| |\ \ \ \ \
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 17:37:39 +0000