| Commit message (Collapse) | Author | Age | Files | Lines | |
|---|---|---|---|---|---|
| * | connected spi pins, but the spi core still needs to be redone for 16 bit ↵ | Matt Ettus | 2010-03-25 | 3 | -40/+60 |
| | | | | | | | interfaces Also reconnected GPIOs so you'll need to send commands in order to get debug pins on the GPIOs | ||||
| * | debug pins | Matt Ettus | 2010-02-25 | 1 | -2/+3 |
| | | |||||
| * | invert the pushbuttons since they are active low | Matt Ettus | 2010-02-25 | 1 | -2/+2 |
| | | |||||
| * | gpmc debug pins | Matt Ettus | 2010-02-25 | 1 | -3/+6 |
| | | |||||
| * | point to the new files | Matt Ettus | 2010-02-25 | 1 | -0/+2 |
| | | |||||
| * | loopback and test | Matt Ettus | 2010-02-25 | 1 | -2/+32 |
| | | |||||
| * | First cut at passing data buffers around on GPMC bus | Matt Ettus | 2010-02-25 | 3 | -10/+24 |
| | | |||||
| * | first cut at making a bidirectional 2 port ram for the gpmc data interface | Matt Ettus | 2010-02-23 | 1 | -0/+1 |
| | | | | | ISE chokes on the unequal size ram | ||||
| * | use our fancy new debug ports | Matt Ettus | 2010-02-23 | 1 | -0/+3 |
| | | |||||
| * | settings bus with 16 bit wishbone interface, put on the main wishbone in u1e | Matt Ettus | 2010-02-22 | 2 | -3/+14 |
| | | |||||
| * | GPIOs now on the wishbone interface | Matt Ettus | 2010-02-22 | 4 | -37/+54 |
| | | |||||
| * | added gpio control to the wishbone | Matt Ettus | 2010-02-18 | 2 | -11/+14 |
| | | |||||
| * | Added I2C, UART, debug pins, misc wishbone stuff | Matt Ettus | 2010-02-18 | 3 | -48/+187 |
| | | |||||
| * | Fixed paths to help icarus find opencores and xilinx models. Added Xilinx ↵ | Matt Ettus | 2010-02-18 | 2 | -4/+7 |
| | | | | | global set and reset module. | ||||
| * | wishbone bridge now with minimal functionality. Need to check | Matt Ettus | 2010-02-16 | 6 | -9/+49 |
| | | | | | timing and handle wait states. | ||||
| * | first cut at gpmc <-> wb bridge, split u1e into core, top, and tb | Matt Ettus | 2010-02-16 | 5 | -34/+93 |
| | | |||||
| * | copied over from safe_u1e | Matt Ettus | 2010-02-16 | 4 | -0/+553 |
| | | |||||
| * | block ram interface to GPMC | Matt Ettus | 2010-02-16 | 1 | -2/+6 |
| | | |||||
| * | basic read support for the GPMC, responds with 16'hBEEF | Matt Ettus | 2010-02-16 | 1 | -2/+8 |
| | | |||||
| * | reorg pin defs | Matt Ettus | 2010-02-14 | 1 | -94/+102 |
| | | |||||
| * | connect GPMC pins to debug bus | Matt Ettus | 2010-02-14 | 2 | -76/+94 |
| | | |||||
| * | organized the pins in the ucf by function | Matt Ettus | 2010-02-09 | 1 | -56/+72 |
| | | |||||
| * | builds a successful led blinker | Matt Ettus | 2010-02-09 | 3 | -2/+4 |
| | | |||||
| * | first cut at blinking leds | Matt Ettus | 2010-02-09 | 4 | -345/+237 |
| | | |||||
| * | skeletons that don't work yet | Matt Ettus | 2010-02-09 | 2 | -0/+607 |
| | | |||||
| * | Moved usrp2 fpga files into usrp2 subdir. | Josh Blum | 2010-01-22 | 41 | -0/+8275 |
 |
index : uhd | |
| Ettus' UHD Repository |
| aboutsummaryrefslogtreecommitdiffstats |