summaryrefslogtreecommitdiffstats
path: root/usrp2/top
Commit message (Expand)AuthorAgeFilesLines
* u1e/u1p: removed led setting regMatt Ettus2011-10-262-14/+4
* u1p/u1e: partially redone atr and gpio redoMatt Ettus2011-10-262-33/+11
* u2/u2p: use new setting_reg based gpios, gets it off of wbMatt Ettus2011-10-262-17/+27
* u1e/u1p: remove unused UARTMatt Ettus2011-10-262-24/+0
* u2/u2p: move nearly all setting regs onto dsp_clkMatt Ettus2011-10-262-30/+37
* u2/u2p: remove dead comments and codeMatt Ettus2011-10-262-84/+16
* usrp2: fix typo in top level core filesJosh Blum2011-10-262-2/+2
* connect and map b100 and e100 front-panel ledsJosh Blum2011-10-112-2/+2
* E100: GPSDO serial port level conversionNick Foster2011-09-282-2/+9
* B100: use gpif_misc on R2 hw, invert direction of gpif_misc pinsNick Foster2011-09-191-2/+2
* u1e,u1p: turn off debug pins, misc cleanupsMatt Ettus2011-09-082-26/+10
* u1p: proper format in ucf fileMatt Ettus2011-09-085-4/+474
* u1e: relax GPMC constraints, eases P&RMatt Ettus2011-09-021-10/+10
* u1e: separate build for E100 and E110, just a different FPGAMatt Ettus2011-09-012-1/+102
* e100: squashed work on bus implementation on GPMCJosh Blum2011-08-293-42/+24
* fpga: minor tweaks to build systemJosh Blum2011-08-262-2/+4
* b100: gpif_rst resynced to gpif_clkMatt Ettus2011-08-261-1/+1
* usrp2: reconnect frontend calibration, timing meetsJosh Blum2011-08-262-2/+2
* e100: continuation of the atr fix to get e100 to buildJosh Blum2011-08-151-2/+2
* usrp2: bump FPGA minor number to 2 for patch releaseJosh Blum2011-08-152-2/+2
* N2x0: print constraints summary from makefileJosh Blum2011-08-151-0/+1
* N2x0: added a Makefile to build all N2x0 projects (make -j4)Josh Blum2011-08-151-0/+22
* N2x0: delay ADC A inversion so A and B are latched in the sameJosh Blum2011-08-151-3/+5
* B100/E100: fix ATR RX mode pins not connectedNick Foster2011-08-102-4/+4
* usrp2: remove old unused readback mux valueJosh Blum2011-07-282-2/+2
* usrp2: bump minor version number for changesJosh Blum2011-07-282-2/+2
* usrp2: fixed swapped tx/rx signals for nsgpioJosh Blum2011-07-282-2/+2
* u2/u2p: apply atr/gpio changes to u2pMatt Ettus2011-07-272-14/+7
* atr: forgot to delete this lineMatt Ettus2011-07-271-1/+0
* u2: redo the atr gpio pins, remove some old cruftMatt Ettus2011-07-271-7/+17
* u2p: finish copying over serdes light fixMatt Ettus2011-07-221-2/+1
* u2/u2p: further qualify the serdes link lightMatt Ettus2011-07-212-7/+6
* appease the ISE godsMatt Ettus2011-07-193-0/+3
* N200: detailed map report allows you to see what takes up too much spaceMatt Ettus2011-07-194-0/+4
* fpga: print timing report after generate bin fileJosh Blum2011-07-192-1/+34
* b100: fix for fpga syntax error on xfer_rateJosh Blum2011-07-191-1/+1
* Merge branch 'b100_shrink' into new_workJosh Blum2011-07-199-257/+306
|\
| * usrp2: split compat number into major/minor (increment minor for fixes)Josh Blum2011-07-032-2/+2
| * e100: proc_int should be high when interruptedJosh Blum2011-06-201-3/+1
| * e100: added proc_int and buffer for async messagesJosh Blum2011-06-192-17/+49
| * u1p: remove uart and bus testing to fit easierMatt Ettus2011-06-161-8/+9
| * u1p: remove unused portsMatt Ettus2011-06-161-1/+0
| * u1e: core compile now works as a fullchip lintMatt Ettus2011-06-161-1/+1
| * u1p/u1e: cleanup some warnings, connect the correct clocksMatt Ettus2011-06-162-11/+10
| * USRP2/N2x0: incremented compat numbers for frontend workJosh Blum2011-06-152-2/+2
| * Merge branch 'usrp_e100_aux_spi' into dsp_rebaseMatt Ettus2011-06-155-156/+24
| |\
| | * usrp-e100: removed passthrough files, not needed w/ aux spi for clock chipJosh Blum2011-06-093-139/+0
| | * usrp-e100: make reg_test32 persistent across resets, bump compat numberJosh Blum2011-06-081-2/+3
| | * usrp-e100: work on aux spiJosh Blum2011-06-082-17/+22
| * | u1e/u1p: new register map for new dspMatt Ettus2011-06-152-26/+32
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 00:46:51 +0000