| Commit message (Expand) | Author | Age | Files | Lines |
* | hook up sampled pps in u2plus, remove unused priority encoder, minor cleanups | Matt Ettus | 2010-12-30 | 2 | -26/+18 |
* | processor can read back vita_time at last pps | Matt Ettus | 2010-12-30 | 1 | -10/+4 |
* | time sync on usrp2 as well, added debug pins to time sync. | Matt Ettus | 2010-12-10 | 1 | -1/+5 |
* | Only do udp now, renamed old ports to exp_time_* | Matt Ettus | 2010-12-09 | 1 | -0/+0 |
* | udp is now the default | Matt Ettus | 2010-12-09 | 2 | -2/+2 |
* | remove old raw ethernet version | Matt Ettus | 2010-12-09 | 2 | -882/+0 |
* | reimplemented mimo time transfer to handle 64 bits. Still needs | Matt Ettus | 2010-12-09 | 1 | -1/+2 |
* | renamed exp_pps_* to be exp_time_*, which is the mimo synchronization signal | Matt Ettus | 2010-12-09 | 5 | -22/+22 |
* | u2plus: clock lock pin capitalization fail | Nick Foster | 2010-12-06 | 2 | -2/+2 |
* | shouldn't be executable | Matt Ettus | 2010-11-20 | 1 | -0/+0 |
* | Add flow control and other small vrt fixes to u2p, minor cleanups | Matt Ettus | 2010-11-11 | 2 | -34/+38 |
* | clear out the vita tx chain and the tx fifo. need to check the fifo | Matt Ettus | 2010-11-11 | 1 | -11/+12 |
* | added ability to truly clear out the entire rx chain. also removed old style... | Matt Ettus | 2010-11-11 | 1 | -3/+9 |
* | proper triggering for interrupts generated on the dsp_clk | Matt Ettus | 2010-11-11 | 1 | -1/+8 |
* | increase compatibility number for flow control | Matt Ettus | 2010-11-11 | 1 | -1/+1 |
* | separated flow control and error reporting on tx path. should work with and ... | Matt Ettus | 2010-11-11 | 1 | -1/+2 |
* | Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl... | Ian Buckley | 2010-11-11 | 1 | -49/+4 |
* | 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZ | Ian Buckley | 2010-11-11 | 2 | -2/+5 |
* | Defaulted all SRAM pins to LVCMOS25 8mA FAST | Ian Buckley | 2010-11-11 | 1 | -67/+67 |
* | Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by default | Ian Buckley | 2010-11-11 | 2 | -7/+23 |
* | Added external RAM FIFO to u2plus. | Ian Buckley | 2010-11-11 | 4 | -7/+123 |
* | revert unneeded changes and incorrect comments | Matt Ettus | 2010-11-11 | 1 | -32/+32 |
* | reconnect GPIOs, remove debug pins, meets timing now | Matt Ettus | 2010-11-11 | 1 | -5/+3 |
* | Modified phase shift of DCM1 to -64 which is intended to give more timing mar... | Ian Buckley | 2010-11-11 | 1 | -1/+1 |
* | Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S... | Ian Buckley | 2010-11-11 | 1 | -12/+12 |
* | Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i... | Ian Buckley | 2010-11-11 | 4 | -5/+100 |
* | hangedddddddextrnal fifo size to use full NoBL SRAM | ianb | 2010-11-11 | 1 | -1/+1 |
* | Corrected extfifo code so that all registers that are on SRAM signals are pac... | ianb | 2010-11-11 | 2 | -37/+42 |
* | Added a bunch of debug signals. | Ian Buckley | 2010-11-11 | 1 | -4/+5 |
* | Regenerated FIFO with lower trigger level for almost full flag to reflect log... | Ian Buckley | 2010-11-11 | 1 | -1/+2 |
* | External FIFO tested in simulation and on USRP2 from decimation 64->8 with cu... | Ian Buckley | 2010-11-11 | 5 | -142/+201 |
* | Merge branch 'u1e' into merge_u1e | Matt Ettus | 2010-11-10 | 19 | -0/+1381 |
|\ |
|
| * | invert led signals because they are active low | Matt Ettus | 2010-11-09 | 1 | -1/+1 |
| * | duh | Matt Ettus | 2010-11-04 | 1 | -1/+1 |
| * | better debug pins | Matt Ettus | 2010-09-23 | 2 | -7/+11 |
| * | watch the ethernet chip select on our debug bus | Matt Ettus | 2010-09-23 | 3 | -6/+8 |
| * | fix timing issue on DAC outputs with rev 2. This puts the whole system on a ... | Matt Ettus | 2010-09-21 | 2 | -50/+25 |
| * | send all gpmc signals to mictor | Matt Ettus | 2010-09-16 | 4 | -0/+201 |
| * | updated pins to match rev2, removed dip switch, etc. seems to compile ok. | Matt Ettus | 2010-09-09 | 3 | -137/+130 |
| * | pins are different on rev2 | Matt Ettus | 2010-09-09 | 1 | -264/+4 |
| * | fixed makefile to compile with our new system | Matt Ettus | 2010-09-07 | 1 | -44/+36 |
| * | add register to tell host about compatibility level and which image we are using | Matt Ettus | 2010-08-30 | 1 | -5/+14 |
| * | move declaration to make loopback compile | Matt Ettus | 2010-08-27 | 1 | -1/+2 |
| * | Merge branch 'tx_policy' into u1e | Matt Ettus | 2010-08-25 | 2 | -7/+10 |
| |\ |
|
| * | | no need for protocol headers since we're not doing ethernet | Matt Ettus | 2010-08-24 | 1 | -1/+1 |
| * | | match the signal names in this design | Matt Ettus | 2010-08-23 | 1 | -3/+3 |
| * | | debug pins cleanup | Matt Ettus | 2010-08-23 | 1 | -3/+3 |
| * | | properly integrate the new tx chain | Matt Ettus | 2010-08-19 | 1 | -31/+27 |
| * | | catch up with tx_policy | Matt Ettus | 2010-08-19 | 2 | -30/+28 |
| * | | attach run_tx and run_rx to leds | Matt Ettus | 2010-08-17 | 1 | -1/+1 |