| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | u2p: FPGA internal termination on the clock line from ADC | Matt Ettus | 2011-06-07 | 1 | -2/+2 |
| * | u2p-lvds: remove unused nets | Matt Ettus | 2011-06-07 | 1 | -2/+0 |
| * | builds now | Matt Ettus | 2011-06-07 | 2 | -2/+4 |
| * | first cut at using lvds for adc pins | Matt Ettus | 2011-06-07 | 2 | -2/+3 |
| * | B100: added some packet splitter debug pins, removed debug from GPIO port, sw... | Nick Foster | 2011-05-26 | 2 | -6/+6 |
| * | u1p: reset gpif | Matt Ettus | 2011-05-26 | 1 | -2/+4 |
| * | u1p: implement a signal to indicate a partially full usb lut, to flush it | Matt Ettus | 2011-05-26 | 2 | -4/+9 |
| * | u1p: need to declare wires | Matt Ettus | 2011-05-26 | 1 | -0/+1 |
| * | u1p: vita packet generator for testing purposes | Matt Ettus | 2011-05-26 | 1 | -1/+2 |
| * | u1p: should fix underrun reporting | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: modify dsp_framer36 to allow it to skip the udp prot eng headers. | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: modernize, fix warnings, debug pins | Matt Ettus | 2011-05-26 | 1 | -22/+10 |
| * | u1p: debug pins | Matt Ettus | 2011-05-26 | 1 | -2/+3 |
| * | u1p: unused signals | Matt Ettus | 2011-05-26 | 1 | -4/+0 |
| * | u1p: pass tx status/error packets back through GPIF over the response channel... | Matt Ettus | 2011-05-26 | 1 | -12/+5 |
| * | u1p: added loopback and timed capability just like u1e | Matt Ettus | 2011-05-26 | 2 | -9/+20 |
| * | u1p: revert change to address bus width | Matt Ettus | 2011-05-26 | 1 | -2/+2 |
| * | u1p: use icarus verilog to find warnings | Matt Ettus | 2011-05-26 | 1 | -0/+2 |
| * | u1p: fix bus widths and other warnings | Matt Ettus | 2011-05-26 | 1 | -9/+10 |
| * | u1p: added debug0, debug1 for GPIF debugging | Nick Foster | 2011-05-26 | 1 | -0/+3 |
| * | u1p: remove extram from Makefile | Nick Foster | 2011-05-26 | 1 | -1/+0 |
| * | u1p: catch up with all the recent u1e changes | Matt Ettus | 2011-05-26 | 1 | -107/+91 |
| * | modernize the make files, it now compiles. not tested. | Matt Ettus | 2011-05-26 | 1 | -56/+9 |
| * | I2C slave address decoding for 16-bit dw instead of 32-bit | Nick Foster | 2011-05-26 | 1 | -1/+1 |
| * | Fixed I2C pin names. | Nick Foster | 2011-05-26 | 1 | -1/+1 |
| * | put gpio back in | Matt Ettus | 2011-05-26 | 1 | -4/+3 |
| * | send reset to the gpif | Matt Ettus | 2011-05-26 | 1 | -2/+3 |
| * | constrain the gpif clock | Matt Ettus | 2011-05-26 | 1 | -0/+3 |
| * | redone gpif interface to match nick's new spec | Matt Ettus | 2011-05-26 | 1 | -2/+2 |
| * | use vita_tx_chain top level block | Matt Ettus | 2011-05-26 | 1 | -22/+14 |
| * | added a loopback control port, will do full wishbone interface later | Matt Ettus | 2011-05-26 | 1 | -6/+8 |
| * | progress on gpif interface | Matt Ettus | 2011-05-26 | 1 | -9/+1 |
| * | gpif skeletons | Matt Ettus | 2011-05-26 | 3 | -134/+31 |
| * | copied over from u1e, most pins hooked up. | Matt Ettus | 2011-05-26 | 6 | -637/+588 |
| * | Use the 4th LED which is shared on the cfg_init_b pin | Matt Ettus | 2011-05-26 | 2 | -6/+10 |
| * | compiles now | Matt Ettus | 2011-05-26 | 4 | -643/+185 |
| * | copied over from other repo. Beginnings of a skeleton fpga image for USRP1-Plus | Matt Ettus | 2011-05-26 | 11 | -0/+1854 |
| * | u1e: incremented compat # to 4 for vita length change | Josh Blum | 2011-05-20 | 1 | -1/+1 |
| * | N210: how the heck did the PPS fix get dropped again | Nick Foster | 2011-05-20 | 1 | -1/+4 |
| * | u1e: get dsp_framer36 from u1p so it can skip the protocol header | Matt Ettus | 2011-05-09 | 1 | -1/+1 |
| * | u1e: switch to vita_rx_chain module just like other toplevels | Matt Ettus | 2011-05-09 | 2 | -20/+11 |
| * | N210: Bootloader includes TXRX. No longer uses safe firmware as backup fw. | Nick Foster | 2011-04-22 | 1 | -368/+368 |
| * | N210: Make new bootloader ignore safe firmware when safe mode button is pushed. | Nick Foster | 2011-04-21 | 1 | -331/+331 |
| * | N210: bootram expanded to 16KB (8 BRAMs) and UDP bootloader added | Nick Foster | 2011-04-21 | 1 | -398/+398 |
| * | N210: UDP bootloader first stab (16K boot RAM) | Nick Foster | 2011-04-21 | 2 | -172/+428 |
| * | Merge branch 'master' into next | Matt Ettus | 2011-03-27 | 3 | -5/+106 |
| |\ |
|
| | * | u2p: N200 Makefile | Matt Ettus | 2011-03-23 | 1 | -0/+98 |
| | * | u1e: use icarus verilog for lint | Matt Ettus | 2011-03-16 | 1 | -0/+2 |
| | * | clean up a bunch of warnings and incorrect bus widths | Matt Ettus | 2011-03-16 | 1 | -5/+6 |
| * | | reverted zpu stack pointer change, incremented fpga compat number | Josh Blum | 2011-03-17 | 2 | -4/+4 |
