summaryrefslogtreecommitdiffstats
path: root/usrp2/top
Commit message (Collapse)AuthorAgeFilesLines
* u1p: proper format in ucf fileMatt Ettus2011-09-085-4/+474
| | | | u1p: build separate u1plus (prototypes) and B100 (release)
* u1e: relax GPMC constraints, eases P&RMatt Ettus2011-09-021-10/+10
|
* u1e: separate build for E100 and E110, just a different FPGAMatt Ettus2011-09-012-1/+102
|
* e100: squashed work on bus implementation on GPMCJosh Blum2011-08-293-42/+24
|
* fpga: minor tweaks to build systemJosh Blum2011-08-262-2/+4
|
* b100: gpif_rst resynced to gpif_clkMatt Ettus2011-08-261-1/+1
|
* usrp2: reconnect frontend calibration, timing meetsJosh Blum2011-08-262-2/+2
|
* e100: continuation of the atr fix to get e100 to buildJosh Blum2011-08-151-2/+2
|
* usrp2: bump FPGA minor number to 2 for patch releaseJosh Blum2011-08-152-2/+2
|
* N2x0: print constraints summary from makefileJosh Blum2011-08-151-0/+1
|
* N2x0: added a Makefile to build all N2x0 projects (make -j4)Josh Blum2011-08-151-0/+22
|
* N2x0: delay ADC A inversion so A and B are latched in the sameJosh Blum2011-08-151-3/+5
|
* B100/E100: fix ATR RX mode pins not connectedNick Foster2011-08-102-4/+4
|
* usrp2: remove old unused readback mux valueJosh Blum2011-07-282-2/+2
|
* usrp2: bump minor version number for changesJosh Blum2011-07-282-2/+2
|
* usrp2: fixed swapped tx/rx signals for nsgpioJosh Blum2011-07-282-2/+2
|
* u2/u2p: apply atr/gpio changes to u2pMatt Ettus2011-07-272-14/+7
|
* atr: forgot to delete this lineMatt Ettus2011-07-271-1/+0
|
* u2: redo the atr gpio pins, remove some old cruftMatt Ettus2011-07-271-7/+17
|
* u2p: finish copying over serdes light fixMatt Ettus2011-07-221-2/+1
|
* u2/u2p: further qualify the serdes link lightMatt Ettus2011-07-212-7/+6
|
* appease the ISE godsMatt Ettus2011-07-193-0/+3
|
* N200: detailed map report allows you to see what takes up too much spaceMatt Ettus2011-07-194-0/+4
|
* fpga: print timing report after generate bin fileJosh Blum2011-07-192-1/+34
|
* b100: fix for fpga syntax error on xfer_rateJosh Blum2011-07-191-1/+1
|
* Merge branch 'b100_shrink' into new_workJosh Blum2011-07-199-257/+306
|\
| * usrp2: split compat number into major/minor (increment minor for fixes)Josh Blum2011-07-032-2/+2
| |
| * e100: proc_int should be high when interruptedJosh Blum2011-06-201-3/+1
| |
| * e100: added proc_int and buffer for async messagesJosh Blum2011-06-192-17/+49
| | | | | | | | | | | | | | | | Redirected the tx_err stream into a buffer_int2, and connected interrupt when a packet is written. The proc_int is muxed into the aux spi miso to use when its not being selected for spi.
| * u1p: remove uart and bus testing to fit easierMatt Ettus2011-06-161-8/+9
| |
| * u1p: remove unused portsMatt Ettus2011-06-161-1/+0
| |
| * u1e: core compile now works as a fullchip lintMatt Ettus2011-06-161-1/+1
| |
| * u1p/u1e: cleanup some warnings, connect the correct clocksMatt Ettus2011-06-162-11/+10
| |
| * USRP2/N2x0: incremented compat numbers for frontend workJosh Blum2011-06-152-2/+2
| |
| * Merge branch 'usrp_e100_aux_spi' into dsp_rebaseMatt Ettus2011-06-155-156/+24
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | * usrp_e100_aux_spi: usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip usrp-e100: make reg_test32 persistent across resets, bump compat number usrp-e100: work on aux spi Conflicts: usrp2/top/E1x0/u1e_core.v
| | * usrp-e100: removed passthrough files, not needed w/ aux spi for clock chipJosh Blum2011-06-093-139/+0
| | |
| | * usrp-e100: make reg_test32 persistent across resets, bump compat numberJosh Blum2011-06-081-2/+3
| | |
| | * usrp-e100: work on aux spiJosh Blum2011-06-082-17/+22
| | |
| * | u1e/u1p: new register map for new dspMatt Ettus2011-06-152-26/+32
| | |
| * | u1p: work in dual rx and frontend from u1eMatt Ettus2011-06-142-16/+61
| | |
| * | u1p: new tx dsp frontend, copied from u1eMatt Ettus2011-06-141-10/+17
| | |
| * | u1e-dsp: attach tx dc offset and iq balanceMatt Ettus2011-06-141-6/+9
| | |
| * | dsp: added tx_frontend, instantiated in u2/u2pMatt Ettus2011-06-082-4/+20
| | |
| * | u1e: update u1e to use new rx_frontend, and give it a 2nd rx dsp coreMatt Ettus2011-06-081-21/+74
| | |
| * | u2/u2p: use all 24 bits from the rx_frontendMatt Ettus2011-06-082-2/+2
| | |
| * | u2/u2p: use new rx_frontend in u2 and u2pMatt Ettus2011-06-082-4/+15
| | |
| * | u2/u2p: misc connection and compilation fixesMatt Ettus2011-06-081-2/+2
| | |
| * | u2/u2p: pull IQ balance and dcoffset out of dsp_core, put in frontend moduleMatt Ettus2011-06-081-2/+13
| |/
* / N2XX: this method for defining R3/R4 actually worksNick Foster2011-06-103-22/+4
|/
* fix copyright noticeMatt Ettus2011-06-071-2/+0
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 07:35:07 +0000