summaryrefslogtreecommitdiffstats
path: root/usrp2/top/u2_rev3
Commit message (Expand)AuthorAgeFilesLines
* zpu: moved stack pointer and made connection for statusJosh Blum2010-12-061-1/+2
* zpu: shrank the ram size and address bus to 16kJosh Blum2010-12-061-5/+5
* zpu: added a zpu + wishbone opencore and integrated into top levelJosh Blum2010-12-061-10/+18
* packet_router: added status readback for mode, incremented compat numberJosh Blum2010-11-241-1/+1
* packet_router: program the dsp udp port and ip addr through setting registersJosh Blum2010-11-231-1/+1
* packet_router: moved udp tx proto machine into packet router, replaced udp_wr...Josh Blum2010-11-231-16/+27
* packet_router: implemented crossbar and valve module, moved sreg into router ...Josh Blum2010-11-231-16/+7
* packet_router: transplanted the async error interface, its now sent into the ...Josh Blum2010-11-231-10/+5
* packet_router: fixed sof bug for cpu (== 1), some logic tweaks, added debugJosh Blum2010-11-231-1/+3
* packet_router: registered control flags, added clear to all state machinesJosh Blum2010-11-231-2/+4
* packet_router: removed unused status words from readback muxJosh Blum2010-11-231-3/+3
* packet_router: fixed swapped connection typo, dsp tx routing worksJosh Blum2010-11-231-2/+3
* packet_router: added all input/output signals to module, created the comm mux...Josh Blum2010-11-231-0/+3
* packet_router: created inspector and added dsp output (however inspection log...Josh Blum2010-11-231-0/+1
* packet_router: created nearly empty router with eth in attached to mapped memoryJosh Blum2010-11-231-19/+14
* shouldn't be executableMatt Ettus2010-11-201-0/+0
* Add flow control and other small vrt fixes to u2p, minor cleanupsMatt Ettus2010-11-111-4/+1
* clear out the vita tx chain and the tx fifo. need to check the fifoMatt Ettus2010-11-111-11/+12
* added ability to truly clear out the entire rx chain. also removed old style...Matt Ettus2010-11-111-3/+9
* proper triggering for interrupts generated on the dsp_clkMatt Ettus2010-11-111-1/+8
* increase compatibility number for flow controlMatt Ettus2010-11-111-1/+1
* separated flow control and error reporting on tx path. should work with and ...Matt Ettus2010-11-111-1/+2
* revert unneeded changes and incorrect commentsMatt Ettus2010-11-111-32/+32
* reconnect GPIOs, remove debug pins, meets timing nowMatt Ettus2010-11-111-5/+3
* Modified phase shift of DCM1 to -64 which is intended to give more timing mar...Ian Buckley2010-11-111-1/+1
* Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S...Ian Buckley2010-11-111-12/+12
* Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i...Ian Buckley2010-11-114-5/+100
* hangedddddddextrnal fifo size to use full NoBL SRAMianb2010-11-111-1/+1
* Corrected extfifo code so that all registers that are on SRAM signals are pac...ianb2010-11-112-37/+42
* Added a bunch of debug signals.Ian Buckley2010-11-111-4/+5
* Regenerated FIFO with lower trigger level for almost full flag to reflect log...Ian Buckley2010-11-111-1/+2
* External FIFO tested in simulation and on USRP2 from decimation 64->8 with cu...Ian Buckley2010-11-114-142/+200
* remove old commented out codeMatt Ettus2010-11-091-180/+0
* fix timing problem on DAC output busMatt Ettus2010-11-091-2/+2
* clean up DAC inversion and swapping to match schematicsMatt Ettus2010-08-251-3/+6
* Clean up iq swapping on RX. It is now swapped in the top level.Matt Ettus2010-08-252-5/+5
* added compat number to usrp2 readback muxJosh Blum2010-08-091-2/+5
* connect the demuxMatt Ettus2010-07-281-1/+1
* fix a typoMatt Ettus2010-07-281-1/+1
* tx error packets now muxed into the ethernet stream back to the hostMatt Ettus2010-07-281-27/+22
* move declaration ahead of useMatt Ettus2010-07-191-5/+5
* put run_tx and run_rx on the displayed LEDsMatt Ettus2010-07-191-3/+4
* barely fails timing on gigE/10 and gigE/12, larger fail on udp/10, but allMatt Ettus2010-06-142-52/+51
* produces good bin filesMatt Ettus2010-06-112-12/+20
* first attempt at cleaning up the build systemMatt Ettus2010-06-103-414/+65
* get rid of debug stuff to help timingMatt Ettus2010-06-081-7/+16
* move u2_core into u2_rev3 directory to simplify directory structure and save ...Matt Ettus2010-06-084-2/+1657
* report ise version in buildMatt Ettus2010-06-071-1/+1
* proper name for directoryMatt Ettus2010-06-071-1/+1
* name build directory with ISE version nameMatt Ettus2010-06-071-1/+1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 22:38:38 +0000