| Commit message (Collapse) | Author | Age | Files | Lines | |
|---|---|---|---|---|---|
| * | b100: install rx data minimum occupancy logic | Josh Blum | 2012-10-09 | 1 | -3/+5 |
| | | |||||
| * | b100: added final fifo for min occupancy check | Josh Blum | 2012-10-09 | 1 | -5/+22 |
| | | |||||
| * | gpif: squashed GPIF slave fifo work for B100 | Josh Blum | 2012-07-02 | 4 | -414/+319 |
| | | | | | | The control and data enpoints are now both implemented as FIFOs. Requires another squash of B100 top level to use. | ||||
| * | slave_fifo: use 2KB FIFO size instead of 1KB | Nick Foster | 2012-04-24 | 1 | -1/+1 |
| | | |||||
| * | b100: implement packet-end/flush cycle timeout | Josh Blum | 2012-04-24 | 2 | -11/+25 |
| | | |||||
| * | gpif: removed unused gpif related files | Josh Blum | 2012-04-24 | 8 | -908/+1 |
| | | |||||
| * | b100: fix slave fifo data xfer exit condition | Josh Blum | 2012-04-01 | 1 | -4/+4 |
| | | | | | | | | When exiting the read/write data state, when the transfer count maxes out/peaks, the fifo read/write signals were getting this condition the cycle after with the state change. | ||||
| * | B100: port cleanups from b100-txbug to this branch | Nick Foster | 2012-03-26 | 2 | -28/+21 |
| | | |||||
| * | b100: cleanup redundant logic for slwr and slrd | Josh Blum | 2012-03-25 | 1 | -2/+2 |
| | | |||||
| * | b100: extra data pktend cycle for fifo addr | Josh Blum | 2012-03-25 | 1 | -2/+8 |
| | | |||||
| * | b100: slave fifo fix for dst/src ready signals | Josh Blum | 2012-03-24 | 1 | -34/+40 |
| | | | | | | | | | Some of the changes my be overkill, but the idea is to be more careful about allowing FIFO IO to occur on transitions. The cal app was able to complete successfully. | ||||
| * | dsp rework: pass vita clears into dsp modules, unified fifo clears | Josh Blum | 2012-02-04 | 2 | -2/+2 |
| | | |||||
| * | b100: connect all clears for gpif | Josh Blum | 2012-02-03 | 2 | -14/+7 |
| | | |||||
| * | Slave FIFO: fix for PKTEND not asserting @ end of RX. | Nick Foster | 2012-01-12 | 1 | -8/+8 |
| | | |||||
| * | B100: moar buffering on TX for better performance in bidirectional applications | Nick Foster | 2012-01-12 | 1 | -3/+3 |
| | | |||||
| * | Squashed slave mode changes onto master. | Nick Foster | 2012-01-12 | 3 | -15/+482 |
| | | |||||
| * | b100: fix warnings, complete removal of test code | Matt Ettus | 2011-11-04 | 1 | -0/+3 |
| | | |||||
| * | b100: remove test features from GPIF to save space | Matt Ettus | 2011-11-04 | 2 | -82/+9 |
| | | |||||
| * | added copyrights | Josh Blum | 2011-06-07 | 8 | -0/+136 |
| | | |||||
| * | B100: added some packet splitter debug pins, removed debug from GPIO port, ↵ | Nick Foster | 2011-05-26 | 3 | -10/+18 |
| | | | | | swapped I&Q in interleaver | ||||
| * | u1p: reset gpif | Matt Ettus | 2011-05-26 | 1 | -2/+2 |
| | | |||||
| * | u1p: connect frames per packet | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| | | |||||
| * | u1p: implement a signal to indicate a partially full usb lut, to flush it | Matt Ettus | 2011-05-26 | 5 | -18/+166 |
| | | |||||
| * | u1p: vita packet generator for testing purposes | Matt Ettus | 2011-05-26 | 1 | -3/+3 |
| | | |||||
| * | should split and reframe packets properly | Matt Ettus | 2011-05-26 | 2 | -27/+58 |
| | | |||||
| * | u1p: do padding outside of gpif_rd, in packet_splitter | Matt Ettus | 2011-05-26 | 5 | -14/+188 |
| | | |||||
| * | u1p: add new file to build | Matt Ettus | 2011-05-26 | 1 | -0/+1 |
| | | |||||
| * | u1p: debug pins | Matt Ettus | 2011-05-26 | 1 | -1/+3 |
| | | |||||
| * | u1p: better way of reframing the packets | Matt Ettus | 2011-05-26 | 3 | -5/+83 |
| | | |||||
| * | u1p:wr testbench | Matt Ettus | 2011-05-26 | 1 | -0/+86 |
| | | |||||
| * | u1p: use 18 bit fifos and use full size of a block ram in the tx path | Matt Ettus | 2011-05-26 | 1 | -6/+7 |
| | | |||||
| * | u1p: gpif-to-fx2 path should now handle arbitrary sized packets, up to 2KB | Matt Ettus | 2011-05-26 | 1 | -22/+29 |
| | | |||||
| * | u1p: pass tx status/error packets back through GPIF over the response ↵ | Matt Ettus | 2011-05-26 | 1 | -5/+21 |
| | | | | | channel (short packets) | ||||
| * | u1p: added loopback and timed capability just like u1e | Matt Ettus | 2011-05-26 | 1 | -19/+91 |
| | | |||||
| * | u1p: fix bus widths and other warnings | Matt Ettus | 2011-05-26 | 3 | -32/+32 |
| | | |||||
| * | u1p: add clear ports to gpif, not hooked up yet | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| | | |||||
| * | add padding into gpif response path | Matt Ettus | 2011-05-26 | 1 | -3/+8 |
| | | |||||
| * | fifo to wb should be functionally complete, needs testing | Matt Ettus | 2011-05-26 | 2 | -13/+9 |
| | | |||||
| * | not used | Matt Ettus | 2011-05-26 | 1 | -16/+0 |
| | | |||||
| * | fix ctrl/resp path to pass all 16 bits of data instead of the bottom bit | Matt Ettus | 2011-05-26 | 3 | -38/+47 |
| | | | | | | typos fixed, everything is connected now, should just have off-by-1 error lots of debug pins added | ||||
| * | first steps to a command packet handler for u1+ | Matt Ettus | 2011-05-26 | 2 | -0/+17 |
| | | |||||
| * | redone gpif interface to match nick's new spec | Matt Ettus | 2011-05-26 | 3 | -60/+123 |
| | | |||||
| * | hook up flow control pins | Matt Ettus | 2011-05-26 | 1 | -2/+10 |
| | | |||||
| * | added a loopback control port, will do full wishbone interface later | Matt Ettus | 2011-05-26 | 1 | -1/+8 |
| | | |||||
| * | progress on gpif interface | Matt Ettus | 2011-05-26 | 3 | -101/+118 |
| | | |||||
| * | gpif skeletons | Matt Ettus | 2011-05-26 | 4 | -0/+80 |
| | | |||||
| * | skeleton | Matt Ettus | 2011-05-26 | 1 | -0/+122 |
 |
index : uhd | |
| Ettus' UHD Repository |
| summaryrefslogtreecommitdiffstats |