| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | u2/u2p: switch over to 36 bit wide ethernet wrapper | Matt Ettus | 2011-03-03 | 1 | -27/+47 |
| * | ethfifo_reorg: switch buffer int2 lastline to work as a length parameter | Josh Blum | 2011-03-03 | 1 | -5/+6 |
| * | u2/u2p: get rid of redeclaration | Matt Ettus | 2011-03-03 | 1 | -1/+0 |
| * | u2/u2p: ll8 now all active high, removed extra shortfifo from eth wrapper | Matt Ettus | 2011-03-03 | 1 | -8/+6 |
| * | u2/u2p: short fifos put on both sides of ll8_to_fifo19 | Matt Ettus | 2011-03-03 | 1 | -27/+44 |
| * | u2/u2p: inserted short fifo into the packet inspector path to help routing an... | Matt Ettus | 2011-02-17 | 1 | -1/+13 |
| * | added port_sel param to dsp framer | Josh Blum | 2011-02-17 | 2 | -4/+5 |
| * | packet_router: added support for two dsps into router | Josh Blum | 2011-02-15 | 1 | -14/+20 |
| * | believed to fix fifo swizzling with partially empty lines | Matt Ettus | 2011-01-21 | 3 | -25/+114 |
| * | xbar and valve: fix switching delayed by active signal | Josh Blum | 2011-01-11 | 2 | -9/+12 |
| * | packet_router: tweak mode SR (its only 1 bit) | Josh Blum | 2011-01-07 | 1 | -3/+2 |
| * | usrp2: removed unused changed signal for mode selection | Josh Blum | 2010-12-29 | 1 | -2/+1 |
| * | packet_router: replace buffers interfaced in packet router with buffer_int2 | Josh Blum | 2010-12-28 | 3 | -163/+25 |
| * | now uses 2 rams, one for read, one for write | Matt Ettus | 2010-12-28 | 1 | -89/+97 |
| * | reformatting | Matt Ettus | 2010-12-28 | 1 | -5/+1 |
| * | first cut at new buffer interface for CPU. Like old buffer_int plus | Matt Ettus | 2010-12-28 | 1 | -0/+169 |
| * | unused line | Matt Ettus | 2010-12-28 | 1 | -1/+0 |
| * | packet_router: use the mode register to reset hs control and cpu sms | Josh Blum | 2010-12-27 | 1 | -22/+13 |
| * | packet_router: all non ip/udp should also go to both | Josh Blum | 2010-12-13 | 1 | -7/+5 |
| * | packet_router: harmless logic tweaks | Josh Blum | 2010-12-12 | 2 | -11/+8 |
| * | packet_router: reverted enable change to dsp framer, it was already correct | Josh Blum | 2010-12-12 | 1 | -2/+1 |
| * | packet_router: raise enable for bram reads the cycle before as well | Josh Blum | 2010-12-11 | 2 | -2/+4 |
| * | packet_router: added fifo before cpu_out, tweaked inspection logic | Josh Blum | 2010-12-10 | 1 | -25/+29 |
| * | packet_router: gave the inspector a 4th output which is CPU only | Josh Blum | 2010-12-10 | 1 | -83/+123 |
| * | packet_router: added status readback for mode, incremented compat number | Josh Blum | 2010-11-24 | 1 | -0/+1 |
| * | packet_router: split the control register into misc, cpu hs out, cpu hs inp | Josh Blum | 2010-11-24 | 1 | -10/+24 |
| * | packet_router: modification for sequence number and vrt header offset | Josh Blum | 2010-11-23 | 1 | -1/+1 |
| * | packet_router: it makes more sense to connect the control flags this way now | Josh Blum | 2010-11-23 | 1 | -13/+6 |
| * | packet_router: program the dsp udp port and ip addr through setting registers | Josh Blum | 2010-11-23 | 1 | -31/+33 |
| * | packet_router: mux the crossbar input after the protocol framer | Josh Blum | 2010-11-23 | 1 | -2/+12 |
| * | packet_router: moved udp tx proto machine into packet router, replaced udp_wr... | Josh Blum | 2010-11-23 | 1 | -2/+42 |
| * | packet_router: moved dsp framer into a module, added clr to splitter and renamed | Josh Blum | 2010-11-23 | 4 | -93/+110 |
| * | packet_router: implemented crossbar and valve module, moved sreg into router ... | Josh Blum | 2010-11-23 | 2 | -45/+65 |
| * | packet valve. will drop incoming data if shut off. | Matt Ettus | 2010-11-23 | 1 | -0/+28 |
| * | abstract out the crossbar functionality | Matt Ettus | 2010-11-23 | 1 | -0/+40 |
| * | packet_router: transplanted the async error interface, its now sent into the ... | Josh Blum | 2010-11-23 | 1 | -7/+16 |
| * | packet_router: added a way to program in the ip and mac addrs, and added insp... | Josh Blum | 2010-11-23 | 1 | -2/+17 |
| * | packet_router: fixed sof bug for cpu (== 1), some logic tweaks, added debug | Josh Blum | 2010-11-23 | 1 | -9/+41 |
| * | packet_router: registered control flags, added clear to all state machines | Josh Blum | 2010-11-23 | 1 | -12/+22 |
| * | packet_router: added splitter and mux for slow path stuff (also fixed typo in... | Josh Blum | 2010-11-23 | 2 | -10/+95 |
| * | packet_router: renamed inspector output signals and connected (for now) to cp... | Josh Blum | 2010-11-23 | 2 | -22/+52 |
| * | packet_router: use BRAM enables to perform pipelined reads | Josh Blum | 2010-11-23 | 1 | -26/+21 |
| * | packet_router: use control register bit for master mode flag | Josh Blum | 2010-11-23 | 1 | -2/+1 |
| * | packet_router: swapped comm mux for a crossbar, serdes crossbar out now muxed... | Josh Blum | 2010-11-23 | 1 | -27/+62 |
| * | packet_router: used registered valid signal for BRAM read cycle delay | Josh Blum | 2010-11-23 | 1 | -16/+15 |
| * | packet_router: created dsp framer for rx path | Josh Blum | 2010-11-23 | 1 | -6/+100 |
| * | packet_router: added lines for com crossbar and com output mux | Josh Blum | 2010-11-23 | 1 | -13/+35 |
| * | packet_router: collapsed inspector states, fixed terminology for cpu inp vs out | Josh Blum | 2010-11-23 | 1 | -163/+161 |
| * | packet_router: some tweaks, dsp output routing seems to work but has wrong of... | Josh Blum | 2010-11-23 | 1 | -4/+10 |
| * | packet_router: added all input/output signals to module, created the comm mux... | Josh Blum | 2010-11-23 | 1 | -6/+19 |
