aboutsummaryrefslogtreecommitdiffstats
path: root/mpm/python/usrp_mpm/CMakeLists.txt
Commit message (Collapse)AuthorAgeFilesLines
* mpm: add tlv_eepromMichael Auchter2021-05-311-1/+5
| | | | | | | | | Add support for parsing an eeprom that uses tag-length-value to store contents. Co-authored-by: Michael Auchter <michael.auchter@ni.com> Co-authored-by: Virendra Kakade <virendra.kakade@ni.com> Co-authored-by: Cristina Fuentes <cristina.fuentes@ni.com>
* sim: Integrate simulator into UHDSamuel O'Brien2020-10-281-0/+1
| | | | | | | | | This commit adds a device::register_device which allows uhd to start up a simulator when uhd is called with the arguments type=sim. Creating the device object creates a subprocess using pybind and an embedded interpreter, and destroying the object cleans up those subprocesses. Signed-off-by: Samuel O'Brien <sam.obrien@ni.com>
* sim: Add Daughterboard MethodsSamuel O'Brien2020-10-071-0/+1
| | | | | | | | This commit adds daughterboard simulation to the simulator. There is a sim_dboard class which registers it's methods with the rpc server. These methods are visible over mpm as well as the mpm_shell. Signed-off-by: Samuel O'Brien <sam.obrien@ni.com>
* sim: Lay Groundwork for SimulatorSamuel O'Brien2020-10-071-1/+1
| | | | | | | | | | | | | | | At this point, only about half of the mpm methods work on the simulator over the mpm shell, and it hasn't been tested with uhd at all. If you want to give it a try, first install all of the python dependencies of mpm (The simulator doesn't require libusrp or any of the C++ deps). In addition, running mpm on a desktop machine requires the python lib netifaces. Next, make an /mpm/build directory and open it. Run `cmake .. -DMPM_DEVICE=sim`, then `make`. Finally, run `python3 python/usrp_hwd.py`. You should be able to open another terminal and run `mpm/tools/mpm_shell.py localhost` to connect to the mpm server. Signed-off-by: Samuel O'Brien <sam.obrien@ni.com>
* uhd: remove liberioRobertWalstab2020-07-201-1/+0
|
* x300/mpmd: Port all RFNoC devices to the new RFNoC frameworkMartin Braun2019-11-261-1/+1
| | | | | | | Co-Authored-By: Alex Williams <alex.williams@ni.com> Co-Authored-By: Sugandha Gupta <sugandha.gupta@ettus.com> Co-Authored-By: Brent Stapleton <brent.stapleton@ettus.com> Co-Authored-By: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
* e310/e320: Move E310 to MPM architecture and refactorSugandha Gupta2019-05-011-0/+1
| | | | | | | | | | | | - Turns the E310 into an MPM device (like N3xx, E320) - Factor out common code between E320 and E310, maximize sharing between the two devices - Remove all pre-MPM E310 code that is no longer needed - Modify MPM to remove all existing overlays before applying new ones (this is necessary to enable idle image mode for E310) Co-authored-by: Virendra Kakade <virendra.kakade@ni.com> Signed-off-by: Virendra Kakade <virendra.kakade@ni.com>
* uhd: mpm: update all license header w/ "-or-later"Brent Stapleton2019-03-081-1/+1
| | | | Updating all SPDX license identifiers to include "-or-later"
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-141-10/+10
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* mpm: n3xx: Factor out component updatingBrent Stapleton2018-07-111-0/+1
| | | | | | | | | - Refactoring component (FPGA, DTS) updating functions out of n3xx.py into their own components.py. The ZynqComponent class now defines the methods to update these two components. - Adding super().__init__() to the PeriphManagerBase class. This is needed to get the multiple inheritance used in N3XX now to work, and (apparently) good Python practice.
* mpm: Add prefs modulesMartin Braun2018-02-081-0/+1
| | | | | - prefs is a module for centralized preferences management - Uses Python's ConfigParser module
* mpm: Harmonize all license headerMartin Braun2017-12-221-13/+2
| | | | Now uses SPDX headers everywhere.
* mpm: adding GPS sensor functionsBrent Stapleton2017-12-221-0/+1
| | | | | | Adding GPS TPV and SKY sensors to MPM, and their respective getters. Reviewed-By: Martin Braun <martin.braun@ettus.com>
* mpm: Harmonize imports, tidy + sort modulesMartin Braun2017-12-221-7/+3
| | | | | | | | - Moved nijesdcore to cores/ - Moved udev, net, dtoverlay, uio to sys_utils/ - Made all imports non-relative (except in __init__.py files) - Removed some unnecessary imports - Reordered some imports for Python conventions
* mpm: Factor out xport managers as own objectsMartin Braun2017-12-221-0/+1
| | | | | | - Move XportMgr classes out of n310.py - Subclass them there and apply N310-specific settings - Remove chdr_interfaces option from PeriphManagerBase
* mpm: Add LiberioDispatcherTableTrung Tran2017-12-221-0/+2
|
* mpm: Add mpmutils module, includes poll_with_timeoutMartin Braun2017-12-221-2/+3
| | | | This is a convenience function for polling with sleeps and timeouts.
* mpm: Add BufferFS serialization libraryMartin Braun2017-12-221-0/+1
| | | | | | | | | | BufferFS is a serialization format with CRC checking and optional byte-alignment for records. It allows storing arbitrary blobs, together with a 8-character identifier, in a contiguous buffer that supports random access. This is suitable for storing arbitrary blobs in EEPROM, but could also support other things. Signed-off-by: Martin Braun <martin.braun@ettus.com>
* mpm/n310: Added Aurora BIST codeMartin Braun2017-12-221-0/+1
|
* mpm: Added TDC clock sync driverMartin Braun2017-12-221-0/+1
|
* mpm: Factored out eeprom code into its own moduleMartin Braun2017-12-221-0/+1
|
* mpm: Added auto-loading of dboard-specific overlaysMartin Braun2017-12-221-0/+1
|
* mpm: Added ethernet dispatcher code for N310Martin Braun2017-12-221-0/+1
|
* mpm: Factored out common LMK04828 codeMartin Braun2017-12-221-0/+1
|
* mpm: Renamed types submodule mpmtypes to avoid import confusionMartin Braun2017-12-221-1/+1
|
* mpm: Added driver for sysfs-based gpiosMartin Braun2017-12-221-3/+4
|
* mpm: Moved over to new logging infrastructureMartin Braun2017-12-221-1/+3
| | | | Also currently hardcodes some settings.
* mpm: comment out functionality to make it workAndrej Rode2017-12-221-0/+1
| | | | | | | | - add uio udev find routine - add debug prints Signed-off-by: Andrej Rode <andrej.rode@ettus.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* mpm: mpm reorganizationAndrej Rode2017-12-221-2/+0
|
* mpm: CMake cleanup, Python code enhancementsAndrej Rode2017-12-221-6/+7
| | | | | - Send user defined data in ping - Improve rpc_shell, add mpm_debug.py, fix tracebacks in multiprocessing
* mpm: python refactoringAndrej Rode2017-12-221-0/+2
|
* Initial commit for N3xx development.Martin Braun2017-12-221-0/+30
- Creates mpm/ subdirectory - First pass at hardware daemon/MPM - New code for LMK04828, AD9371 - spidev integration Contributions by: Martin Braun <martin.braun@ettus.com> Derek Kozel <derek.kozel@ettus.com> Mark Meserve <mark.meserve@ni.com> Andrej Rode <andrej.rode@ettus.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-02 19:48:55 +0000