summaryrefslogtreecommitdiffstats
path: root/host
Commit message (Expand)AuthorAgeFilesLines
* uhd: bump verion compat to 3.3.1Josh Blum2011-10-271-1/+1
* uhd: added toolchain file for native arm neon buildJosh Blum2011-10-271-0/+8
* uhd: more doc tweaks to build guideJosh Blum2011-10-261-2/+7
* Line-wraps in general docs.Ben Hilburn2011-10-261-7/+9
* Simple refactor, lower-cased 'FAT' so users wouldn't think it is an acronym.Ben Hilburn2011-10-261-3/+3
* Small changes / markup on the e1xx documentation.Ben Hilburn2011-10-261-14/+20
* Adding stuff to the tune request docs.Ben Hilburn2011-10-261-9/+15
* uhd: change how we configure version.cppJosh Blum2011-10-252-7/+6
* docs: unified gpsdo docs and sensors stuffJosh Blum2011-10-254-45/+53
* nseries: added dont check rev option to the burner appJosh Blum2011-10-241-3/+4
* usb: improve messages/logging for when the usb open failsJosh Blum2011-10-241-1/+15
* b100: perform test claim on usb before continuingJosh Blum2011-10-241-14/+7
* b100/e100: additional constraints for clock rate configurationJosh Blum2011-10-182-0/+6
* uhd: added missing shbang to pre/post scriptsJosh Blum2011-10-148-1/+9
* uhd: added post/pre un/install scripts for deb and rpm packagesrelease_003_003_000Josh Blum2011-10-149-1/+175
* uhd: added supported models and some doc tweaksJosh Blum2011-10-143-8/+10
* Default adf4350 PLL to fast-lock mode.Ben Hilburn2011-10-121-1/+1
* Fix for unitialized eepromJason Abele2011-10-121-1/+3
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-123-28/+70
* usrp: add documentation for front-panel leds (needs FPGA update)Josh Blum2011-10-122-0/+34
* uhd: specify range on tx_waveforms --amplJosh Blum2011-10-101-1/+1
* b100: add reference lock sensorJosh Blum2011-10-104-2/+19
* usrp: added product and revision fields to eepromJosh Blum2011-10-102-36/+80
* usrp: added revision field to the dboard id classJosh Blum2011-10-103-2/+30
* Renaming 'usrp1_init_eeprom' to 'fx2_init_eeprom', and making it enable based onBen Hilburn2011-10-102-3/+3
* Changed the udev rules for the new B100 PID.Ben Hilburn2011-10-101-1/+1
* B100/USRP1: pass in VID/PID from args string so you can specify where to look...Nick Foster2011-10-103-8/+39
* Init_eeprom: enhancements for B100/reinit of init'ed devicesNick Foster2011-10-101-2/+5
* Bumping the B100 PID to 0x0002, at Josh's direction.Ben Hilburn2011-10-101-1/+1
* uhd: help messages for user on rx samples to fileJosh Blum2011-10-082-2/+16
* e100: codec control register fix for txJosh Blum2011-10-061-1/+1
* gen2: fixed rate calculation when > 128Josh Blum2011-10-042-2/+6
* usrp2: give users a warning for gpsdo support + fw updateJosh Blum2011-09-281-0/+7
* usrp2: remove old pre-release warningJosh Blum2011-09-281-10/+0
* usrp2: allow backwards compat with previous fwJosh Blum2011-09-281-1/+1
* e100: tweak for codec params for slight improvementJosh Blum2011-09-281-4/+12
* e100: gps talking -> termios magic fooJosh Blum2011-09-281-9/+7
* e100: gps uart deal with cr and nlJosh Blum2011-09-282-10/+5
* e100: added support for internal gpsdoJosh Blum2011-09-284-0/+107
* gps: use absolute timeout for communicationJosh Blum2011-09-281-6/+6
* usrp: add gps control to the APIJosh Blum2011-09-281-1/+1
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-2810-104/+96
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-281-0/+1
* e100: added ref locked sensor for clock referenceJosh Blum2011-09-284-2/+22
* e100: added support for r4 differential clockingJosh Blum2011-09-283-13/+36
* uhd: doc tweak for udp transport notesJosh Blum2011-09-261-2/+2
* B100: unshadow dboard clock rates so you can set master freq after init and s...Nick Foster2011-09-233-7/+21
* uhd: bumped version numbers for this new cycleJosh Blum2011-09-231-2/+2
* Updates to example appsJason Abele2011-09-215-7/+198
* Make unknown db complain usefully about antenna selectionJason Abele2011-09-211-4/+4
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 11:31:15 +0000