summaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* uhd: bumped version num to 3.4.1 for releaserelease_003_004_001Josh Blum2012-04-101-1/+1
|
* dsp: clear register now overlaps with numchan register.Josh Blum2012-04-091-4/+2
| | | | This fixes the bug of unwanted clearing when setting format.
* usrp: fix set_clock_config typo for external and mimo clock refJosh Blum2012-04-061-2/+2
| | | | | | This is a typo in the set_clock_config implementation. However, the enum values are the same, so this would not cause a bug. Fixed although set_clock_config is a deprecated interface.
* examples: fix bsd compilation for network relay exampleJosh Blum2012-04-011-3/+3
| | | | | | | Fixes compilation on platforms that dont have one of the OS defines by providing #else case for rx_dsp_buff_size constant. This also makes OSX the special case and assumes other OS can handle the large RX socket buffer size.
* usrp1: stop threads in deconstructorJosh Blum2012-03-293-4/+10
| | | | | | | | | | | | | | | Its important to stop the threads before we let the other smart point objects naturally deconstruct to avoid thread-based race conditions. The attempt to deconstruct the tree and soft time ctrl had a bug because the tree had references in subtrees within the dboard manager class. Rather than continue to fix this method and deconstruct the tree to free up soft time ctrl, it seems simpler to just stop the thread in soft time ctrl, and then let it naturally deconstruct later by ref count.
* cmake: Binaries give notification before installing or uninstalling UHD. ↵Nicholas Corgan2012-03-294-1/+5
| | | | Better to give an output than just an empty pause.
* dbsrx: limit the USRP1 + DBSRX GPIO clock rate to 4MHzJosh Blum2012-03-261-1/+8
| | | | | This fixes the lockup/clocking condition when the following hw combo is used: USRP1 r4.5 + DBSRX + another i2c board
* usrp2: possible fix for invalid broadcast repliesJosh Blum2012-03-261-3/+17
|
* uhd: use release mode and git count for stable and unstable buildsJosh Blum2012-03-261-22/+28
|
* Changes preinst.in to 'echo' instead of 'ls'Nicholas Corgan2012-03-231-1/+1
|
* usrp: fix for rx_frontend_core_200 dc offsetJosh Blum2012-03-231-3/+4
| | | | | Mask off upper bits when setting a constant offset (I and Q regs). The sign bits (if negative) can flow off into the flags field.
* usrp: fix typo for user setting regJosh Blum2012-03-211-1/+1
|
* docs: whitespace fixing usrp2 docsrelease_003_004_000Josh Blum2012-03-211-2/+3
|
* uhd: add calls to query an ABI compat stringJosh Blum2012-03-212-2/+20
|
* Added alternative Docutils install method to UHD docsNicholas Corgan2012-03-191-0/+4
|
* Disabling the SBX mixer and baseband amp causes griefJason Abele2012-03-161-1/+1
| | | | | Some ADA4927 / AD5380 combinations do not appreciate being disabled, so lets not disable them
* tx_bursts: set EOB on nsamps <= spbNick Foster2012-03-161-1/+1
|
* docs: Just added a couple of clarifying notes to the N2Xx docs.Ben Hilburn2012-03-161-0/+27
|
* B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the ↵Nick Foster2012-03-161-2/+2
| | | | "stuffing zeroes" problem and improves transport reliability.
* usrp: fix from "rev iq correction"Josh Blum2012-03-163-6/+6
| | | | Must zero out the default IQ correction to have zero effect by default.
* n2x0: adjustment for phase delay over mimo cableJosh Blum2012-03-141-1/+1
|
* uhd: make atlbase options for msvc buildJosh Blum2012-03-142-4/+16
|
* uhd: rev iq correction numbers formatJosh Blum2012-03-146-52/+15
|
* Add a toolchain file to build cross using e100 toolchain.Philip Balister2012-03-131-0/+20
| | | | | | | | | | | This appears to build uhd cross using my toolchain. Run cmake with: cmake -DCMAKE_TOOLCHAIN_FILE=../cmake/Toolchains/arm_cortex_a8_cross.cmake \ -DENABLE_E100=ON -DENABLE_USRP_E_UTILS=TRUE ../ It does not detect orc properly. Signed-off-by: Philip Balister <philip@opensdr.com>
* For Windows installers, CMake checks the size of void* to differentiate ↵Nicholas Corgan2012-03-131-1/+7
| | | | between Windows x86 and x64.
* usrp: fix wildcard set for time/clock sourceJosh Blum2012-03-121-2/+2
|
* uhd: added fullscale option stream argJosh Blum2012-03-113-1/+10
|
* Make DBSRX* set default bandwidth based on codec rateJason Abele2012-03-112-2/+7
|
* Fix RSSI measurementJason Abele2012-03-113-19/+4
| | | | | | Improve incorrect calculation in XCVR Remove RFX rssi sensor due to limited dynamic range giving strange results
* usrp1: fix for cordic init, cant do it that way on txJosh Blum2012-02-291-3/+0
|
* Changes Windows installer filename to match naming convention of Ubuntu and ↵Nicholas Corgan2012-02-291-0/+1
| | | | Fedora installers
* uhd: fix sc16 to sc8 conversion tableJosh Blum2012-02-291-12/+12
| | | | | | | 1) this was registered as the sc8 to sc16 converter, probably messed that up as well 2) the cast to index was wrong, now unit test passes
* usrp2: device locking tweaksJosh Blum2012-02-291-9/+6
| | | | | | | 1) use bottom bit for force lock condition, that way we never check the time after proper shutdown 2) dont allow lock condition under fpga compat mismatch
* usrp: reset cordics on init after tick rate updateJosh Blum2012-02-284-0/+33
|
* uhd: fixed some compile warnings for msvcJosh Blum2012-02-284-5/+5
|
* cmake:Nicholas Corgan2012-02-284-14/+17
| | | | | | | More git info used for build info UHD version incorporates build info apt/yum repos use new version number New installer filename syntax
* uhd: fixed send pkt handler, vrt packet type was uninitializedJosh Blum2012-02-271-0/+1
| | | | | | | This fixes a bug where the sc8 engine will not interpret the packet as an IF data packet due to uninitialized bits. In that case the sc8 packet would pass through and be interpreted by the downstream as an sc16 packet.
* usrp1: fix to use the db connection type to determine DAC signJosh Blum2012-02-241-2/+10
| | | | | | | | Unlike the other products, usrp1 uses the DAC and not DSP to perform baseband frequency shifting in the hardware. Therefore this shifting occurs before I and Q swapping, and so, the sign of the frequency needs to be inverted on daughterboards which have inverted I and Q TX inputs.
* usrp1: fix advertised samples per packet in send streamerJosh Blum2012-02-211-1/+2
| | | | | Must subtract off the 511 for 512 modulus remainder commit. This bug was introduced by the conversion to streamer API.
* Try really hard to get cmake to use compiler flags from the toolchain file.Philip Balister2012-02-211-2/+2
| | | | | | | | | | | | See: http://www.mail-archive.com/cmake@cmake.org/msg33248.html Also credit to OpenEmbedded for doing something similar in the toolchain file they create. Note that adding the SYSTEM_NAME to the toolchain file sets CROSS_COMPILING, which is not what we want for native compiling. Signed-off-by: Philip Balister <philip@opensdr.com>
* usb: added /opt/local to libusb search pathJosh Blum2012-02-211-1/+2
| | | | For OSX from MLD
* usrp2: some tweaks to the device locking logicJosh Blum2012-02-201-6/+9
|
* usrp2: added retry logic to control packetsJosh Blum2012-02-201-2/+32
|
* usrp2: changed download url for dd.exeJosh Blum2012-02-182-2/+2
|
* uhd: added -fvisibility-inlines-hiddenJosh Blum2012-02-181-1/+2
|
* Merge branch 'next'Josh Blum2012-02-1759-394/+1268
|\
| * dsp rework: fix for vita occ trailer packingJosh Blum2012-02-171-1/+1
| |
| * dsp rework: added flusher to vita tx chain on clearJosh Blum2012-02-152-5/+8
| |
| * uhd: added async md user payload and common utilsJosh Blum2012-02-145-48/+100
| |
| * b100: use frame boundary to calculate frame sizeJosh Blum2012-02-142-4/+6
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 20:00:22 +0000