summaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* n2xx: set default for checkrev on burner so gui still worksrelease_003_003_001Josh Blum2011-10-291-1/+1
|
* basic/lf: keep dboard clocks disabled (should be by default)Josh Blum2011-10-271-2/+2
|
* uhd: bump verion compat to 3.3.1Josh Blum2011-10-271-1/+1
|
* uhd: added toolchain file for native arm neon buildJosh Blum2011-10-271-0/+8
|
* uhd: more doc tweaks to build guideJosh Blum2011-10-261-2/+7
|
* Line-wraps in general docs.Ben Hilburn2011-10-261-7/+9
|
* Simple refactor, lower-cased 'FAT' so users wouldn't think it is an acronym.Ben Hilburn2011-10-261-3/+3
|
* Small changes / markup on the e1xx documentation.Ben Hilburn2011-10-261-14/+20
|
* Adding stuff to the tune request docs.Ben Hilburn2011-10-261-9/+15
|
* uhd: change how we configure version.cppJosh Blum2011-10-252-7/+6
| | | | | | use configure_file vs defines, Possible fix for messaged up dependency/caching issue, see when changing CMakeLists, even in small ways.
* docs: unified gpsdo docs and sensors stuffJosh Blum2011-10-254-45/+53
|
* nseries: added dont check rev option to the burner appJosh Blum2011-10-241-3/+4
|
* usb: improve messages/logging for when the usb open failsJosh Blum2011-10-241-1/+15
|
* b100: perform test claim on usb before continuingJosh Blum2011-10-241-14/+7
|
* b100/e100: additional constraints for clock rate configurationJosh Blum2011-10-182-0/+6
|
* uhd: added missing shbang to pre/post scriptsJosh Blum2011-10-148-1/+9
|
* uhd: added post/pre un/install scripts for deb and rpm packagesrelease_003_003_000Josh Blum2011-10-149-1/+175
|
* uhd: added supported models and some doc tweaksJosh Blum2011-10-143-8/+10
|
* Default adf4350 PLL to fast-lock mode.Ben Hilburn2011-10-121-1/+1
|
* Fix for unitialized eepromJason Abele2011-10-121-1/+3
|
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-123-28/+70
|
* usrp: add documentation for front-panel leds (needs FPGA update)Josh Blum2011-10-122-0/+34
|
* uhd: specify range on tx_waveforms --amplJosh Blum2011-10-101-1/+1
|
* b100: add reference lock sensorJosh Blum2011-10-104-2/+19
|
* usrp: added product and revision fields to eepromJosh Blum2011-10-102-36/+80
|
* usrp: added revision field to the dboard id classJosh Blum2011-10-103-2/+30
|
* Renaming 'usrp1_init_eeprom' to 'fx2_init_eeprom', and making it enable based onBen Hilburn2011-10-102-3/+3
| | | | ENABLE_USB rather than ENABLE_USRP1 since we also need it for B100.
* Changed the udev rules for the new B100 PID.Ben Hilburn2011-10-101-1/+1
|
* B100/USRP1: pass in VID/PID from args string so you can specify where to ↵Nick Foster2011-10-103-8/+39
| | | | look for devices if you like
* Init_eeprom: enhancements for B100/reinit of init'ed devicesNick Foster2011-10-101-2/+5
|
* Bumping the B100 PID to 0x0002, at Josh's direction.Ben Hilburn2011-10-101-1/+1
|
* uhd: help messages for user on rx samples to fileJosh Blum2011-10-082-2/+16
|
* e100: codec control register fix for txJosh Blum2011-10-061-1/+1
|
* gen2: fixed rate calculation when > 128Josh Blum2011-10-042-2/+6
|
* usrp2: give users a warning for gpsdo support + fw updateJosh Blum2011-09-281-0/+7
|
* usrp2: remove old pre-release warningJosh Blum2011-09-281-10/+0
|
* usrp2: allow backwards compat with previous fwJosh Blum2011-09-281-1/+1
| | | | | You only need the newer fw for uart streaming. This is needed only if you use an internal gpsdo.
* e100: tweak for codec params for slight improvementJosh Blum2011-09-281-4/+12
|
* e100: gps talking -> termios magic fooJosh Blum2011-09-281-9/+7
|
* e100: gps uart deal with cr and nlJosh Blum2011-09-282-10/+5
|
* e100: added support for internal gpsdoJosh Blum2011-09-284-0/+107
|
* gps: use absolute timeout for communicationJosh Blum2011-09-281-6/+6
|
* usrp: add gps control to the APIJosh Blum2011-09-281-1/+1
|
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-2810-104/+96
|
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-281-0/+1
|
* e100: added ref locked sensor for clock referenceJosh Blum2011-09-284-2/+22
|
* e100: added support for r4 differential clockingJosh Blum2011-09-283-13/+36
|
* uhd: doc tweak for udp transport notesJosh Blum2011-09-261-2/+2
|
* B100: unshadow dboard clock rates so you can set master freq after init and ↵Nick Foster2011-09-233-7/+21
| | | | still tune ok
* uhd: bumped version numbers for this new cycleJosh Blum2011-09-231-2/+2
|
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-31 01:51:01 +0000