summaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* usrp: added product and revision fields to eepromJosh Blum2011-10-102-36/+80
|
* usrp: added revision field to the dboard id classJosh Blum2011-10-103-2/+30
|
* Renaming 'usrp1_init_eeprom' to 'fx2_init_eeprom', and making it enable based onBen Hilburn2011-10-102-3/+3
| | | | ENABLE_USB rather than ENABLE_USRP1 since we also need it for B100.
* Changed the udev rules for the new B100 PID.Ben Hilburn2011-10-101-1/+1
|
* B100/USRP1: pass in VID/PID from args string so you can specify where to ↵Nick Foster2011-10-103-8/+39
| | | | look for devices if you like
* Init_eeprom: enhancements for B100/reinit of init'ed devicesNick Foster2011-10-101-2/+5
|
* Bumping the B100 PID to 0x0002, at Josh's direction.Ben Hilburn2011-10-101-1/+1
|
* uhd: help messages for user on rx samples to fileJosh Blum2011-10-082-2/+16
|
* e100: codec control register fix for txJosh Blum2011-10-061-1/+1
|
* gen2: fixed rate calculation when > 128Josh Blum2011-10-042-2/+6
|
* usrp2: give users a warning for gpsdo support + fw updateJosh Blum2011-09-281-0/+7
|
* usrp2: remove old pre-release warningJosh Blum2011-09-281-10/+0
|
* usrp2: allow backwards compat with previous fwJosh Blum2011-09-281-1/+1
| | | | | You only need the newer fw for uart streaming. This is needed only if you use an internal gpsdo.
* e100: tweak for codec params for slight improvementJosh Blum2011-09-281-4/+12
|
* e100: gps talking -> termios magic fooJosh Blum2011-09-281-9/+7
|
* e100: gps uart deal with cr and nlJosh Blum2011-09-282-10/+5
|
* e100: added support for internal gpsdoJosh Blum2011-09-284-0/+107
|
* gps: use absolute timeout for communicationJosh Blum2011-09-281-6/+6
|
* usrp: add gps control to the APIJosh Blum2011-09-281-1/+1
|
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-2810-104/+96
|
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-281-0/+1
|
* e100: added ref locked sensor for clock referenceJosh Blum2011-09-284-2/+22
|
* e100: added support for r4 differential clockingJosh Blum2011-09-283-13/+36
|
* uhd: doc tweak for udp transport notesJosh Blum2011-09-261-2/+2
|
* B100: unshadow dboard clock rates so you can set master freq after init and ↵Nick Foster2011-09-233-7/+21
| | | | still tune ok
* uhd: bumped version numbers for this new cycleJosh Blum2011-09-231-2/+2
|
* Updates to example appsJason Abele2011-09-215-7/+198
| | | | | | Add --ref option to specify mboard clock reference source Add check for lock to mboard clock reference (where applicable) Add check of daughterboard LO lock detect (where applicable)
* Make unknown db complain usefully about antenna selectionJason Abele2011-09-211-4/+4
|
* usrp: super packet handler release in orderJosh Blum2011-09-211-0/+7
| | | | Makes new usb implementation work where submissions must be in order.
* B100: LVDS clocking on db outputsNick Foster2011-09-201-8/+4
|
* usrp1: disable pad to one for usrp1 (not needed)Josh Blum2011-09-192-0/+4
| | | | This was messing up the pad to 512 bytes logic for empty flushes.
* b100: order of deconstruction, kill marauder firstJosh Blum2011-09-191-0/+5
|
* usb: added interface args to usb abstractionsJosh Blum2011-09-198-30/+38
|
* uhd: separate_device_addr, copy globals across entire addressJosh Blum2011-09-151-2/+14
|
* usrp: also use the new API to get the property tree in multi-usrpJosh Blum2011-09-141-1/+1
|
* usrp: fix string mapping for PPS_NEG clock configJosh Blum2011-09-141-1/+1
|
* uhd: updated to images documentationJosh Blum2011-09-121-21/+8
|
* usrp: remove wax::obj entry point (not used)Josh Blum2011-09-084-12/+0
|
* usrp: fix check for max stream_cmd.num_samps, upper 4 bits reservedJosh Blum2011-09-081-1/+1
|
* USRP2: don't populate GPS sensors if no GPSDO found. Fixes bug #614.Nick Foster2011-09-081-4/+6
|
* wbx: fix bug in wbxv3 tx gain readback calculationJosh Blum2011-09-081-1/+1
|
* udp: added check_registry_for_fast_send_threshold to non-wsa transportJosh Blum2011-09-081-0/+30
|
* e100: fix FPGA filename lookup, and use model string for nameJosh Blum2011-09-031-2/+2
|
* uhd: add mimo cable config option to rx_multi_samplesJosh Blum2011-09-061-2/+18
|
* uhd: updated docs usb post-install, added uhd-usrp.rulesJosh Blum2011-09-056-51/+61
|
* uhd: remove Boost_LIBRARIES from pc file libs.privateJosh Blum2011-09-031-4/+0
| | | | | To properly do this, the Boost_LIBRARIES needs to be sanitized. That will be saved for another commit...
* usb: reimplement ~libusb_zero_copy_impl to avoid segfaults and indefinite ↵Josh Blum2011-09-021-13/+13
| | | | timeouts
* usrp1: reset control objects in this order to avoid race conditionsJosh Blum2011-09-021-1/+3
|
* usb: removed handler thread, do work in get buffer callsJosh Blum2011-09-021-85/+75
|
* e100: use model string to determine FPGA image to support E110Josh Blum2011-09-012-4/+14
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 15:53:03 +0000