summaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* usrp2: make usrp2 dsp multi-channel compatibleJosh Blum2010-09-201-4/+20
|
* usrp1: implemented multi-channel dsp control of shift freqJosh Blum2010-09-2011-207/+191
| | | | | | usrp: simple usrp calls into single usrp and prints deprecation warning usrp: tune helper now supports multi-channel dsps
* uhd: added single usrp interface, added usrp1 properties to prop namesJosh Blum2010-09-2017-89/+546
|
* usrp2: provide clock over mimo connector so usrp2 can share refsJosh Blum2010-09-171-1/+50
|
* uhd: added enable flags for usrp1 and usrp2Josh Blum2010-09-093-31/+66
|
* usrp2: added some pps docs using the test example appJosh Blum2010-09-091-1/+10
|
* usrp: test for async messages, also renamed pps testJosh Blum2010-09-093-6/+218
|
* usrp: dboard eeprom burner app takes slot param (fixed for automatic)Josh Blum2010-09-092-6/+13
|
* usrp1: added docs and authorJosh Blum2010-08-312-5/+48
|
* Removed USRP1 firmware path debug messagesNick Foster2010-08-311-2/+2
|
* Added serial number read. Renamed the usrp1-specific utilities.Nick Foster2010-08-314-6/+22
|
* Added usrp_serial_burner.cpp and capabilities for setting serial number in ↵Nick Foster2010-08-314-3/+89
| | | | mboard_impl. Have not yet added read support.
* Merge branch 'usrp1' of ettus.sourcerepo.com:ettus/uhdpriv into usrp1Nick Foster2010-08-3120-59/+482
|\
| * usrp1: tested dbsrx, works with lower dividerJosh Blum2010-08-311-3/+3
| |
| * usrp1: Fedora sdcc note and change fw error to warning (find should not error)Josh Blum2010-08-311-3/+14
| |
| * usrp1: flush for flow error messagesJosh Blum2010-08-311-2/+2
| |
| * Merge branch 'next' into usrp1Josh Blum2010-08-313-11/+22
| |\
| | * uhd: sine table for tx waveformsJosh Blum2010-08-311-4/+15
| | |
| | * usrp2: flush the error flow messages, issue the stop before register ↵Josh Blum2010-08-312-7/+7
| | | | | | | | | | | | configure to align count
| * | usrp1: init the subdev specs so they will be non-emptyJosh Blum2010-08-301-0/+5
| | |
| * | usrp1: work on gpio clock divider for dbsrx, still not lockingJosh Blum2010-08-303-7/+20
| | |
| * | usrp1: subdev spec tweaks and docsJosh Blum2010-08-303-11/+46
| | |
| * | Merge branch 'convert_types' into usrp1Josh Blum2010-08-306-28/+271
| |\|
| | * uhd: added interleave/de-interleave type conversion routinesJosh Blum2010-08-304-20/+166
| | |
| | * uhd: fixed short conversion (IQ swap) and added test between short/floatJosh Blum2010-08-303-8/+105
| | |
| * | Merge branch 'next' into usrp1Josh Blum2010-08-303-0/+105
| |\|
| | * Merge branch 'pps_test' into nextJosh Blum2010-08-303-0/+105
| | |\
| | | * Created pps_test example and docsJason Abele2010-08-273-0/+105
| | | |
* | | | EEPROM burning in UHD. Changed some USB device handle stuff. Added ↵Nick Foster2010-08-3111-90/+227
|/ / / | | | | | | | | | usrp_init_eeprom.cpp. Hacked up the firmware makefile to behave and to generate .bin EEPROM images instead of IHX.
* | | usrp1: Additional comments on libusb transport implemenationThomas Tsou2010-08-285-3/+87
| | |
* | | usrp1: Read capabilities registerThomas Tsou2010-08-271-0/+40
| | |
* | | usrp1: Don't flush the stream buffer after every overrun/underrunThomas Tsou2010-08-271-2/+2
| | |
* | | usrp1: Remove unused funtions libusb transportThomas Tsou2010-08-271-6/+0
| | |
* | | usrp1: Additional comments to libusb transport implementationThomas Tsou2010-08-271-79/+104
| | |
* | | Merge branch 'usrp1' of ettus.sourcerepo.com:ettus/uhdpriv into usrp1Josh Blum2010-08-277-43/+76
|\ \ \
| * | | usrp1: Wait for USB device renumeration only when necessaryThomas Tsou2010-08-272-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | Waiting for FX2 renumeration is only needed after a firmware load so move it out of the main device discovery loop and into the firmware load itself.
| * | | usrp1: Handle degenerate managed send buffer casesThomas Tsou2010-08-271-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle degenerate usage of send buffer commits. If the buffer is destroyed without ever being submitted, submit a zero byte transfer to return control to the underlying structure. If a committed buffer is re-committed, then report an error message and return 0 bytes back.
| * | | usrp1: Disable default debug output for libusb implementationsThomas Tsou2010-08-273-3/+3
| | | |
| * | | usrp1: Cleanup libusb device handlingThomas Tsou2010-08-273-33/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch limits all libusb device enumeration operations to FSF (Vendor ID = 0xfffe) devices, which removes a lot of unncessary libusb output when debug mode is enabled. The reference counts held by the libusb device list are also reduced, which prevents holding references to unused devices.
* | | | usrp1: some app notesJosh Blum2010-08-273-0/+43
|/ / /
* | | usrp1: Disable i2c error messages unless debug is enabledThomas Tsou2010-08-271-2/+4
| | | | | | | | | | | | | | | | | | Failed i2c operations can be normal under certain situations. Notably, write failures are used to detect unpopulated daughterboard slots.
* | | usrp1: Disable default codec debug outputThomas Tsou2010-08-271-1/+1
| | |
* | | Merge branch 'usrp1_cleanup' into usrp1Thomas Tsou2010-08-274-65/+53
|\ \ \
| * | | usrp1: Add missing include for fpga registersThomas Tsou2010-08-271-0/+1
| | | |
| * | | usrp1: Only return a list of FSF devicesThomas Tsou2010-08-271-1/+12
| | | |
| * | | usrp1: Fix DDC rate storage value and comments for multiple channel supportThomas Tsou2010-08-271-4/+14
| | | |
| * | | usrp1: Clean up initialization sequence of fpga registersThomas Tsou2010-08-271-59/+18
| | | |
| * | | usrp1: Fix fpga load issue by increasing delay after firmware loadThomas Tsou2010-08-271-1/+1
| | | | | | | | | | | | | | | | 500ms is not enough. 1-2 seconds is suitable.
| * | | usrp1: Add TODO commentsThomas Tsou2010-08-271-1/+8
| | | |
* | | | usrp1: handle special dbsrx clocking caseJosh Blum2010-08-265-130/+55
|/ / /
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 08:30:48 +0000