aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* TwinRX: Enable phase resync on ADF535xmichael-west2018-12-101-17/+9
|
* TwinRX: Tuning improvementsmichael-west2018-12-103-17/+20
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* cmake: use "MATCHES" instead of "STREQUAL" for "Clang"Michael Dickens2018-12-071-3/+3
| | | | + allows proper building with both AppleClang and native Clang.
* uhd: Fix log statement for Port number on RFNOC blockSugandha Gupta2018-12-051-1/+1
| | | | | CE is display in decimal format and Port number will be displayed in Hex, as it represents Block Port on the crossbar
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* examples: rfnoc_radio_loopback: Clean up exampleMartin Braun2018-12-031-15/+11
| | | | | | | | | | - Remove unnecessary Boostisms - Remove unecessary thread priority (this example doesn't actually do anything that requires high thread priority) - Used auto in some places to increase readability - Fixed some compiler warnings No functional changes.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* docs: python: add documentation on GIL releaseBrent Stapleton2018-11-291-0/+23
| | | | | Adding documentation explaining where the Python API releases the Python GIL, and what that means for users.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* cmake: Properly register devtestMartin Braun2018-11-291-1/+3
| | | | | If N300 or E320 is disabled, the appropriate devtests are no longer registered.
* python: Add sync source to Python APIBrent Stapleton2018-11-292-0/+41
| | | | Exposing getters, setters, and options for multi_usrp sync source.
* e300: Type-cast fix for boostAndreas Müller2018-11-281-1/+1
| | | | | | | Fixes compiler errors on newer Boost. boost::posix_time::microseconds() requires a int64_t. Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
* filter: Fix return value in get_rolloffDerek Kozel2018-11-281-1/+1
|
* rfnoc: Add halt to replay APIWade Fife2018-11-273-1/+12
| | | | | The HALT feature allows a command that takes a long time to run to be stopped while it is in progress.
* rfnoc: Fix default SPP for replayWade Fife2018-11-271-4/+3
| | | | Consolidate two constants for default replay packet size down to one.
* RFNoC: Fix replay example port argsWade Fife2018-11-271-3/+3
|
* Docs: Adjust E310 functional verification testsmichael-west2018-11-261-10/+10
| | | | The sample rates and the interpolation/decimation limits didn't match.
* x3xx: implement rfnoc get antenna functionsMark Meserve2018-11-262-0/+16
|
* utils: specify the downloader's Python executableBrent Stapleton2018-11-261-1/+1
| | | | | | | | | | Change the uhd_images_downloader's first line to execute with a runtime Python interpreter, as determined at UHD build time. Users can still use an arbitrary Python executable by calling `python uhd_images_downloader` This will fix our embedded products by ensuring that we call Python3 when running uhd_images_downloader in embedded mode.
* cmake: python: adding RUNTIME_PYTHON_EXECUTABLEBrent Stapleton2018-11-261-1/+15
| | | | | | Adding a CMake variable to set the runtime Python interpreter. This will default to PYTHON_EXECUTABLE, which is the build time Python interpreter.
* x300: fixup minimum master clock rateBrent Stapleton2018-11-211-1/+1
| | | | | Recent clocking changes set the minimum master clock rate to 187.5MHz, instead of the actual 184.32MHz. This change corrects that.
* multi_usrp: Fixed get_tx_stream referenceGregory Eslinger2018-11-201-1/+1
|
* uhd: fix rx antenna not being applied in txrx exampleMark Meserve2018-11-161-2/+3
|
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* mpmd: add fpga_vesion_hash infoTrung Tran2018-11-161-0/+2
|
* tests: Retrofit sph test to use new mock transportCiro Nishiguchi2018-11-165-201/+293
|
* utils: uhd_images_downloader: Add --http-proxy optionMartin Braun2018-11-161-2/+11
| | | | | | | | | | | | This lets the user specify a HTTP proxy. The environment variable HTTP_PROXY is still usable, but --http-proxy will override it. Example: $ uhd_images_downloader \ --http-proxy http://user:pass@10.20.30.40:3128 \ -t x310 Here, the tool will download all the images matching 'x310' using a proxy at 10.20.30.40.
* mpmd: Improve error message for compat number mismatchesMartin Braun2018-11-161-6/+14
|
* x300: New mode to configure master clock rateScott Torborg2018-11-163-10/+104
| | | | | | | | Add a new clocking mode to automatically configure arbitrary master clock rates. Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com>
* cmake: Improve logic for UHD_IMAGES_DIRA. Maitland Bottoms2018-11-151-2/+0
| | | | | A CMake option is either On or Off. UHD_IMAGES_DIR gets a sane default if not specified on the CMake command line.
* cmake: Add SOURCE_DATE_EPOCHA. Maitland Bottoms2018-11-151-0/+5
| | | | | Reproducible builds set SOURCE_DATE_EPOCH rather than arbitrary build timestamps. Use it if set, otherwise revert to the old way.
* python: populated the tune_result_t bindingKevin Rigney2018-11-151-0/+6
| | | | | | The Python API bindings for the tune_result_t structure was not complete. This caused problems when trying to use it, as when tuning the TwinRX daughtercard.
* python: adding device_addr_t to Python APIBrent Stapleton2018-11-142-0/+33
| | | | | | | Add support for device_addr_t to the Python API. Most functions are exposed normally. The main exception is the constructor from a map of strings, which is replaced by a factory function called `make_device_addr`.
* python: tighten the scope of releasing the GILBrent Stapleton2018-11-141-20/+22
| | | | | Only release the GIL for the calls to send() and recv(), instead of the entire wrapper functions.
* python: expose streamer timeoutsBrent Stapleton2018-11-141-16/+27
| | | | | | Expose optional timeouts on send, recv, and recv_async_msg. These timeouts do not apply to the setup in the wrapper functions, only the calls to the streamer functions.
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* uhd: Add device arg to enable dual ethernet for txCiro Nishiguchi2018-11-142-2/+17
| | | | | | | | UHD currently only uses a single ethernet link for tx data, even if the device is initialized with dual 10GbE links. Using both links when a DMA FIFO is present causes sequence errors due to DMA FIFO bandwidth limitations. This maintains the current default behavior but allows users to override it through a device arg "enable_tx_dual_eth".
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-1472-1731/+1731
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* mpmd: increase rpc timeout during reading mb sensorTrung Tran2018-11-131-1/+4
| | | | | | | Reading motherboard sensor, sometimes, takes more than 2 seconds. We don't have asynchronous RPC, increase this timeout will help long sensor reading such as reading GPSD value when GPSD connection is unreliable.
* utils: Fix downloader return value for main()Martin Braun2018-11-131-7/+11
| | | | | | This is effectively a refactoring: The main() function now returns True on success. This fixes a bug where one branch would simply return (None) instead of returning a value.
* utils: Downloader stall on error for Windows usersMartin Braun2018-11-131-2/+30
| | | | | | | | | If platform.system() is 'Windows', the Python script will stall on error before terminating, e.g., when an import is missing or when an unexpected Exception occurred during the execution. The rationale is that many Windows users run this script directly, without a shell, and wouldn't have a way to see error messages from the script in that case.
* utils: uhd_images_downloader: Remove archive typeMartin Braun2018-11-131-28/+22
| | | | | | | Since the uhd_images_downloader is so tightly integrated into our infrastructure, we've dropped support for .tar.gz and .tar.xz file for this particular purpose. Note that UHD releases still receive images in all three formats.
* utils: uhd_images_downloader: Refactor the toolMartin Braun2018-11-131-115/+153
| | | | | No functional changes. The main effort was to reduce the length of main() and reduce the number of Pylint warnings.
* utils: Allow downloader to ship non-zip filesMartin Braun2018-11-131-5/+13
| | | | | | Note: All archives shipped using this tool are zip files. However, this allows us to ship other types of files, which will be downloaded and sorted into the images directory as-is.
* utils: uhd_images_downloader: Add download limitMartin Braun2018-11-131-1/+25
| | | | | | | | | | | | | | This download limit prevents users from accidentally downloading really large files. The default limit is 100 MiB. When a file is selected for download that exceeds this size, the user is prompted if she really wants to download that file. By specifying --yes (or -y), this can can be bypassed. Example: $ uhd_images_downloader --yes -t sdimg Will match all files that match 'sdimg', which are typically larger than 100 MiB, without interaction.
* utils: uhd_images_downloader: Add --yes optionMartin Braun2018-11-131-0/+25
| | | | | | | | | This will answer 'yes' to all questions that are asked and allows to script the downloader. Example: $ uhd_images_downloader -t sdimg -y Any interaction that the script will have with the user will be skipped.
* utils: add downloader printing fetchable URLsMartin Braun2018-11-131-12/+24
| | | | | | | | | | | | | | Running $ uhd_images_downloader -l will now print the full URL of the target. By specifying $ uhd_images_downloader -l --url-only It will *only* print the URLs, nothing else, making this suitable for scripting. The list will always go to stdout, whereas the logging is going to stderr and thus can easily be siphoned off.
* utils: Make uhd_images_downloader log to stderrMartin Braun2018-11-131-2/+2
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 18:51:21 +0000