aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Expand)AuthorAgeFilesLines
* doc: add clock_source and time_source to n3xx argument list. fix WR clock_sou...Daniel Jepson2018-08-031-2/+5
* rfnoc: examples: Removed some legacy code patterns from RFNoC examplesMartin Braun2018-08-022-34/+45
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
* mpmd: Allow setting time_source and clock_source propsMartin Braun2018-08-021-24/+4
* uhd: python: CMakeLists.txt change dll to pydTrung Tran2018-08-011-1/+7
* python: Enable Python API on non-WindowsBrent Stapleton2018-08-011-1/+5
* docs: n3xx: Add section on building fs/SD imagesMartin Braun2018-08-011-0/+47
* x300: Log git hash and compat number as debug messageMartin Braun2018-08-011-3/+8
* b100: Demote some clocking-related log messages to traceMartin Braun2018-07-311-2/+2
* b100: Remove all Boostisms from fifo_ctrl_excelsiorMartin Braun2018-07-311-9/+9
* b100: Fix fifo_ctrl_excelsior not exitingMartin Braun2018-07-311-13/+2
* b100: Move fifo_ctrl_excelsior to b100 subdirMartin Braun2018-07-315-2/+2
* lmx2592: fix calibration start during tuningMark Meserve2018-07-311-1/+3
* lmx2592: always mux lock detect after initMark Meserve2018-07-311-9/+5
* fixup! multi_usrp: Expose APIs for TX LO controlsMartin Braun2018-07-311-0/+1
* docs: Fix Doxygen warningsMartin Braun2018-07-313-5/+5
* lib: device: Parallelize device discoveryMartin Braun2018-07-311-11/+19
* mpmd: Parallelize broadcast-findingMartin Braun2018-07-311-2/+11
* python: Fixup for Python API install directoryBrent Stapleton2018-07-271-3/+15
* uhd: Post-release cleanupBrent Stapleton2018-07-251-2/+2
* X300: Change Ethernet bufferingMichael West2018-07-2515-334/+355
* Device3: Constrain send_buff_sizeMichael West2018-07-251-6/+12
* rx_streamer: Release buffers no longer neededMichael West2018-07-251-9/+26
* X300: Reduce Ethernet frame size to 4000michael-west2018-07-252-6/+5
* Device3: Change packet-based flow control to byte-based flow controlMartin Braun2018-07-2521-463/+657
* rfnoc: Enabled SW flush mechanism impl'd in noc_shellAshish Chaudhari2018-07-244-5/+92
* tests: Add multi_usrp_test.pyVidush2018-07-241-0/+624
* 3.13.0.0 ReleaseBrent Stapleton2018-07-242-0/+119
* rfnoc: legacy_compat: Remove superfluous variableMartin Braun2018-07-231-1/+0
* C API: Fix incorrectly declared lockMartin Braun2018-07-231-1/+1
* n230: Fix incorrectly declared locksMartin Braun2018-07-231-3/+5
* x300: Fix incorrectly declared locksMartin Braun2018-07-232-5/+5
* docs: Add comments on block port and ID for stream argsMartin Braun2018-07-201-1/+12
* docs: Python API: Add comment on building on WindowsMartin Braun2018-07-191-0/+10
* docs: Add page for the C APIMartin Braun2018-07-192-0/+25
* docs: Add page for the Python APIMartin Braun2018-07-193-1/+87
* Preparing for 3.13.0.0 ReleaseMartin Braun2018-07-191-1/+1
* mpm: n3xx: Init device on bootMartin Braun2018-07-181-0/+42
* mpmd: Add set_timeout_init() API call to mpmd_mboard_implMartin Braun2018-07-182-2/+11
* fixup! uhd: Warn when tuning with auto DSP frequency and an external LOBrent Stapleton2018-07-181-1/+3
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-1816-12/+1928
* mpm: initial commit of E320 codeBrent Stapleton2018-07-182-0/+21
* mpm: mg: Adding fast-reinit modeMartin Braun2018-07-171-0/+24
* multi_usrp: Fix get_usrp_tx_info() for MPMD devicesMartin Braun2018-07-171-1/+1
* UBX: Add support for phase synchronization at LTE clock ratesMichael West2018-07-173-13/+46
* X300: Change default dboard_clock_rate depending on master_clock_rateMichael West2018-07-172-3/+3
* X300: Add support for 11.52 MHz and 23.04 MHz referencesMichael West2018-07-171-12/+82
* devtest: Minor Python fixesMartin Braun2018-07-171-18/+30
* fixup! lib: Purge some use of boost::system_timeMartin Braun2018-07-171-1/+0
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 00:35:24 +0000