aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* 3.8.5 Release CandidateMartin Braun2015-07-142-3/+3
| | | | | | - Updated fpga-src - Updated version strings - Updated images package
* x300: Added max hw rev checkingMartin Braun2015-07-142-0/+11
|
* e3xx: Fixup for idle image to follow naming convention.Moritz Fischer2015-07-141-2/+2
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* examples: Improved tx_waveform multi-channel syncMartin Braun2015-07-141-8/+18
|
* e3xx: Bump compat number from 6 -> 8.Moritz Fischer2015-07-141-1/+1
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e3xx: Increase TX buffer size to PAGE_SIZE.Moritz Fischer2015-07-141-1/+1
| | | | | | | | This was originally limited because it performed poor, however, with refactoring that has been done since release, this now gives better performance. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e3xx: Load idle image on shutdown.Moritz Fischer2015-07-142-23/+33
| | | | | | | | | | This commit will have UHD load the idle fpga image on destruction of e300_impl. Note: This requires usrp_e310_idle_fpga.bit to be present in the UHD images directory. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* b200: Bumped FPGA compat number to 8 for releaseAshish Chaudhari2015-07-141-1/+1
|
* B200: New AD9361 I/O timing programming to work with new b200_io.v logic design.Ian Buckley2015-07-082-3/+3
|
* docs: tweak OSX build from source advice to have more obvious NOTEs, per uhd ↵Michael Dickens2015-07-061-5/+14
| | | | issue #37
* b200: Codec loopback test now throws on failure.Martin Braun2015-07-011-5/+6
|
* docs: Minor manual updateMartin Braun2015-06-301-1/+1
|
* b200: Modify initialization sequence to avoid warningsMartin Braun2015-06-292-12/+15
| | | | | | | | | | This will set the actual default rate to an integer factor of whatever the tick rate is, but leave the property tree value at zero. This avoids warnings if the chosen tick rate is not a multiple of the previous default rate, but also returns a zero value for the rate when it has not been initialized, allowing the user to probe if the value has not yet been set.
* msvc: fixed default DLL resource templateNicholas Corgan2015-06-251-1/+1
|
* docs: Fixed FPGA manual auto-buildingMartin Braun2015-06-232-3/+2
|
* doc: Integrated install instructions into manualMartin Braun2015-06-237-28/+422
|
* docs: added missing parameter descriptionsNicholas Corgan2015-06-222-3/+4
|
* cmake: removed unnecessary printsNicholas Corgan2015-06-221-3/+4
|
* multi_usrp: Add define for GPIO capabilitiesMartin Braun2015-06-111-0/+2
|
* examples: Updated init_usrp example on note about CMake flagsMartin Braun2015-06-092-0/+9
|
* E300: Implement get_freq() for E300 network mode.michael-west2015-05-223-0/+18
|
* B200/E300: Fix incorrect readback of frequency.michael-west2015-05-226-3/+31
| | | | When the LO is tuned it changes the frequency on both channels. The frequency value read back for the first channel was not updated when the LO frequency for the other channel was tuned to a different value.
* x300: Updated clock rate / ref freq warnings for clarityMartin Braun2015-05-221-16/+28
|
* ad9361: Minor clarifications on req_rate and baseband_bwMartin Braun2015-05-192-4/+13
|
* doc: e310: Update the manifest URL.Moritz Fischer2015-05-131-1/+1
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* fixup! e300: gps: If gps is detected, set device time to gps time on init.Moritz Fischer2015-05-121-0/+3
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* convert: Add sc16-sc16 SSE converterTom Tsou2015-05-112-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | The sc16-sc16 wire to host type converter is effectively an I/Q swap or 16-bit byteswap for little and big endian cases respectively. This implmentation is a subset of fc32 and fc64 converters without the floating point portion and scaling. The resulting byte ordering is as follows: ----------------- | A | B | C | D | Wire ----------------- 0 1 2 3 ----------------- | C | D | A | B | Litte-endian ----------------- 0 1 2 3 ----------------- | B | A | D | C | Big-endian ----------------- 0 1 2 3 Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* Renamed images package for release tagMartin Braun2015-05-111-2/+2
|
* 3.8.4 Release CandidateMartin Braun2015-05-062-3/+3
| | | | | | - Updated fpga-src - Updated version strings - Updated images package
* b200: Changed the max byte rate over USB2Marcus Müller2015-05-061-2/+1
| | | | | Max rate is now set to 53248000, allowing for more than 8MS/s, which is closer to the actual value that USB2 can handle.
* B200: Made find function properly ignore missing "product" value (BUG #770)michael-west2015-05-051-3/+1
|
* doc: e3x0: Added partno. for E310 locking power connector.Moritz Fischer2015-05-051-1/+1
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* doc: e300: Remove bandwidth promises.Moritz Fischer2015-05-051-1/+0
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* doc: e300: gpio: Fix typo for GPIO example.Moritz Fischer2015-05-051-1/+1
| | | | | | The example code given in the docs would set the wrong bit. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* uhd: utils: query_gpsdo: Explicitly set time_source to 'gpsdo'.Moritz Fischer2015-05-011-0/+4
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: gps: If gps doesn't have lock return 0 as time.Moritz Fischer2015-05-012-11/+7
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: gps: Keep antenna power supply and pps running all the time.Moritz Fischer2015-05-012-6/+3
| | | | | | | | This is a change from behaviour so far. Before the GPS was only on while UHD is running. This behaviour was confusing users, and didn't match our other devices. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: gps: If gps is detected, set device time to gps time on init.Moritz Fischer2015-05-011-0/+11
| | | | | | | Before the device time wasn't set for E310 on initialization. This will allow 'query_gpsdo_sensors' to pass if gps has lock. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* docs: Removed stray CMake messageMartin Braun2015-04-301-1/+0
|
* b200: Fixed compiler warningMartin Braun2015-04-301-2/+2
|
* Updated Images Package for B200Martin Braun2015-04-301-2/+2
|
* docs: Track doc updates on fpga-srcMartin Braun2015-04-302-2/+4
|
* b200: Added convenience subdev override for consistent subdev experienceMartin Braun2015-04-273-22/+29
|
* docs: Added FPGA manualMartin Braun2015-04-274-4/+39
| | | | | | | | The actual FPGA manual pages are in the FPGA repository. Only if the submodule is checked out will it build the manual pages. If the submodule is not checked out, it will create a link to the FPGA manual hosted online.
* b200: Fixed FE swapping registerMartin Braun2015-04-242-5/+19
|
* ubx: pfd frequency fix (relevant for X300 operation)Michael West2015-04-231-0/+2
|
* b200: Bumped FPGA compat number to 6Ashish Chaudhari2015-04-231-1/+1
|
* Merge branch 'maint' into mwest/b200_rev5Ashish Chaudhari2015-04-238-15/+51
|\
| * USRP2: Separate FPGA compat numbers for USRP2 and N200.michael-west2015-04-232-3/+25
| |
| * cmake: Improve usage of C modulesMartin Braun2015-04-203-7/+1
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 22:05:55 +0000