aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* python: adding device_addr_t to Python APIBrent Stapleton2018-11-142-0/+33
| | | | | | | Add support for device_addr_t to the Python API. Most functions are exposed normally. The main exception is the constructor from a map of strings, which is replaced by a factory function called `make_device_addr`.
* python: tighten the scope of releasing the GILBrent Stapleton2018-11-141-20/+22
| | | | | Only release the GIL for the calls to send() and recv(), instead of the entire wrapper functions.
* python: expose streamer timeoutsBrent Stapleton2018-11-141-16/+27
| | | | | | Expose optional timeouts on send, recv, and recv_async_msg. These timeouts do not apply to the setup in the wrapper functions, only the calls to the streamer functions.
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* uhd: Add device arg to enable dual ethernet for txCiro Nishiguchi2018-11-142-2/+17
| | | | | | | | UHD currently only uses a single ethernet link for tx data, even if the device is initialized with dual 10GbE links. Using both links when a DMA FIFO is present causes sequence errors due to DMA FIFO bandwidth limitations. This maintains the current default behavior but allows users to override it through a device arg "enable_tx_dual_eth".
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-1472-1731/+1731
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* mpmd: increase rpc timeout during reading mb sensorTrung Tran2018-11-131-1/+4
| | | | | | | Reading motherboard sensor, sometimes, takes more than 2 seconds. We don't have asynchronous RPC, increase this timeout will help long sensor reading such as reading GPSD value when GPSD connection is unreliable.
* utils: Fix downloader return value for main()Martin Braun2018-11-131-7/+11
| | | | | | This is effectively a refactoring: The main() function now returns True on success. This fixes a bug where one branch would simply return (None) instead of returning a value.
* utils: Downloader stall on error for Windows usersMartin Braun2018-11-131-2/+30
| | | | | | | | | If platform.system() is 'Windows', the Python script will stall on error before terminating, e.g., when an import is missing or when an unexpected Exception occurred during the execution. The rationale is that many Windows users run this script directly, without a shell, and wouldn't have a way to see error messages from the script in that case.
* utils: uhd_images_downloader: Remove archive typeMartin Braun2018-11-131-28/+22
| | | | | | | Since the uhd_images_downloader is so tightly integrated into our infrastructure, we've dropped support for .tar.gz and .tar.xz file for this particular purpose. Note that UHD releases still receive images in all three formats.
* utils: uhd_images_downloader: Refactor the toolMartin Braun2018-11-131-115/+153
| | | | | No functional changes. The main effort was to reduce the length of main() and reduce the number of Pylint warnings.
* utils: Allow downloader to ship non-zip filesMartin Braun2018-11-131-5/+13
| | | | | | Note: All archives shipped using this tool are zip files. However, this allows us to ship other types of files, which will be downloaded and sorted into the images directory as-is.
* utils: uhd_images_downloader: Add download limitMartin Braun2018-11-131-1/+25
| | | | | | | | | | | | | | This download limit prevents users from accidentally downloading really large files. The default limit is 100 MiB. When a file is selected for download that exceeds this size, the user is prompted if she really wants to download that file. By specifying --yes (or -y), this can can be bypassed. Example: $ uhd_images_downloader --yes -t sdimg Will match all files that match 'sdimg', which are typically larger than 100 MiB, without interaction.
* utils: uhd_images_downloader: Add --yes optionMartin Braun2018-11-131-0/+25
| | | | | | | | | This will answer 'yes' to all questions that are asked and allows to script the downloader. Example: $ uhd_images_downloader -t sdimg -y Any interaction that the script will have with the user will be skipped.
* utils: add downloader printing fetchable URLsMartin Braun2018-11-131-12/+24
| | | | | | | | | | | | | | Running $ uhd_images_downloader -l will now print the full URL of the target. By specifying $ uhd_images_downloader -l --url-only It will *only* print the URLs, nothing else, making this suitable for scripting. The list will always go to stdout, whereas the logging is going to stderr and thus can easily be siphoned off.
* utils: Make uhd_images_downloader log to stderrMartin Braun2018-11-131-2/+2
|
* rfnoc: Replace some [] with .at() in radio_ctrl_implMartin Braun2018-11-131-8/+8
| | | | | This makes it easier to detect errors in derived classes that expect getters in radio_ctrl_impl to also do error checking.
* docs: n3xx & e320: Add more information on SaltMartin Braun2018-11-082-0/+83
|
* rh: initialize switchesMark Meserve2018-11-071-3/+10
|
* docs: x300: Add section on motherboard clockingMartin Braun2018-11-071-0/+50
|
* x300: Remove 120 MHz optionMartin Braun2018-11-072-3/+1
| | | | | None of our FPGA images support a 120 MHz master clock rate, so the UHD code should match that.
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
| | | | - Improves performance for frequencies greater than 3.5 GHz
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
| | | | | | | | | - This is a combination of 5 commits. - rh: add lo distribution board gpio expander - rh: add lo distribution mpm functions - rh: add code to conditionally initialize lo distribution - rh: change empty i2c device from exception to assertion - rh: add lo distribution board control
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
|
* uhd: Changes to traffic counter register namesCiro Nishiguchi2018-10-312-78/+62
| | | | | | This makes the noc traffic counter register actually reflect the registers in the FPGA. The FPGA register names were changed prior to merging to master, and the ready count registers were removed.
* tests: device3_test: add graph impl testTrung Tran2018-10-317-59/+295
|
* debian: Update control files for .deb filesMartin Braun2018-10-294-21/+29
| | | | | | | | | - Better alignement with public Debian files. - Move to a different package name: libuhd003.so -> libuhd3.13.0.so This allows to install multiple packages in parallel for better ABI compatibility by third-party dependees. The new package replaces the old one. - Remove .shlibs file
* cmake: Change SOVERSION and VERSION for the library filesMartin Braun2018-10-292-2/+9
| | | | | | The SOVERSION will now match the ABI string, and the VERSION matches the full UHD version. This will allow easier parallel installation of multiple versions of UHD.
* cores:rx_frontend_core_3000: fix real modeGwenhael Goavec-Merou2018-10-291-0/+2
|
* python: Add missing constructors of time_spec_tPiotr Krysik2018-10-251-0/+3
| | | | | | Currently Python interface of time_spec_t exposes only constructor with 'double' parameter. Other constructors are also important as they provide higher precision. This change adds them to the Python API.
* rh: add support for rhodium devicesMark Meserve2018-10-2515-3/+3622
| | | | | | Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ni.com>
* Test: Add unit test for eeprom_utilsmichael-west2018-10-254-2/+63
|
* X300: Prevent duplicate MAC and IP addresses from being programmed in MBMichael West2018-10-252-2/+104
| | | | EEPROM
* X300: Add recovery for duplicate IP addresses in EEPROMMichael West2018-10-252-19/+13
| | | | | - Limit initialization to ZPU communication if recover_mb_eeprom=1 is set in device args.
* block_ctrl_base: add UHD_SAFE_CALL to destructorTrung Tran2018-10-241-13/+15
| | | | | This will stop the exception throw during destructor of E310 where new FPGA image(idle image) is load.
* cmake: Bump CMake minimum version to 2.8.12Martin Braun2018-10-241-2/+2
| | | | | | This enables some interesting features we can now use in UHD, such as: - target_compile_options - add_compile_options
* UHD: Fix RX streamer SOB and EOB handlingMichael West2018-10-241-2/+9
|
* multi_usrp: Improve documentation for set_{time,clock,sync}_sourceMartin Braun2018-10-221-14/+95
| | | | | - Added note on bad-value-handling (throws uhd::value_error) - Added notes on what happens on re-init
* docs: n3xx: Improve sections on clock/time referencesMartin Braun2018-10-221-9/+22
| | | | | | - Added more detail on how to use White Rabbit - Highlight the options with external clock source (with or without external time source)
* uhd: Add dual measurements to benchmark_streamerCiro Nishiguchi2018-10-181-113/+314
| | | | | Add options to run benchmark_streamer with multiple streamers running concurrently on separate threads.
* twinrx: revise adf5356 frac2 register calculationMark Meserve2018-10-171-1/+1
| | | | | - If FRAC2 isn't exactly FRAC1 at certain frequencies, drifting spurs can be seen in the spectrum
* B200: Restore asynchronous reset of AD936x.michael-west2018-10-172-4/+15
|
* e320: Added E320 docs page, reg map updatedSugandha Gupta2018-10-172-0/+707
|
* lmx2592: remove initial scratch register readbackMark Meserve2018-10-171-24/+0
| | | | | - This is the only read operation in the driver, so removing it simplifies the driver's requirements significantly.
* lmx2592: add spur dodgingMark Meserve2018-10-172-23/+330
|
* lib: ad9361: De-boostify AD9361 driverMartin Braun2018-10-172-106/+195
| | | | No functional or API changes.
* docs: Fix N210 MIMO Phase Alignment commandBrent Stapleton2018-10-121-1/+1
| | | | | | | The synchronization source for the N210 MIMO phase alignment needs to be set to anything other than 'pps' or 'auto' (which is actually 'pps'). 'default' skips the call to `set_time_unknown_pps`, which is the proper way to synchronize in this sitation.
* utils: fix bmark_rate MIMO synchronizationBrent Stapleton2018-10-121-9/+10
| | | | | | | | | | Fix USRP2 MIMO synchronization in benchmark_rate. When synchronizing N2XXs connected with a MIMO cable, only the master's time needs to be set; the slave will be synchronized automatically. Currently, calling set_time_unknown_pps will attempt to synchronize the slave on the next PPS, which can cause problems since the MIMO cable doesn't propogate a PPS signal.
* uhd: Improve documentation for the UHD exception typesMartin Braun2018-10-121-0/+51
|
* multi_usrp: Add sync_source APIMartin Braun2018-10-112-6/+211
| | | | | | | | | | The sync_source API is an atomic setter for all sync-related settings. If supported by the underlying USRP, it can be faster to call set_sync_source() rather than sequentially calling set_clock_source() and set_time_source(). If the underlying device does not support the sync_source API, it will fall back to the set_clock_source() and set_time_source() APIs, making this change backward-compatiple.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 01:24:06 +0000