aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* docs: Updated Octoclock documentationMarcus Müller2015-04-141-16/+18
| | | | | | - Octoclock uses 10 Base-T interface, not 1000 Base-T - Fixed "Note:**" in Octoclock page, unified formatting - All commands are now `preformat` instead of **bold** or *italic*.
* Updated images package for 3.8.3Ashish Chaudhari2015-04-141-2/+2
|
* Updated Changelog and version number for 3.8.3Martin Braun2015-04-141-1/+1
|
* dboards: Fixed type deduction for older compilers on max287x codeMichael West2015-04-141-6/+6
|
* Updated images package for N210Martin Braun2015-04-101-2/+2
|
* Increase command FIFO depth of N2x0 and X3x0 to 64.michael-west2015-04-103-4/+4
|
* UBX Phase Synchronization Supportmichael-west2015-04-101-64/+187
| | | | - Added configuration and assertion of SYNC signal
* X300: Change dboard clock rate to 50 MHzmichael-west2015-04-104-345/+480
|
* Fix for BUG #683: UHD: Need to factor out MAX287x code for UBX and CBXmichael-west2015-04-104-714/+918
| | | | | - Factored out MAX287x code into common header file - Added necessary code for MAX2871 synchronization.
* usrp1: codec_ctrl: Fix compiler warning.Moritz Fischer2015-04-101-1/+1
| | | | | | Use std::abs() instead of abs(). Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* Fixed B2x0 doc, man pagesMarcus Müller2015-04-093-5/+36
| | | | | | | * usrp_b200.dox: added information on GPIO header * usrp_b200.dox: added missing footnote on things only on B210 * usrp_b200.dox: added paragraph on bw adjustment * uhd_usrp_probe.1/uhd_find_devices.1: added type=e3x0 listing
* e300: remote_codec_ctrl: Fixed typo in error messageMoritz Fischer2015-04-081-1/+1
|
* B200: Change Catalina Reg 0x06 for RX data setup/hold timing issue @ ↵Ian Buckley2015-04-061-1/+1
| | | | 30.72MHz. Issue #726
* e100: Support command time access through dboard_iface.michael-west2015-04-032-6/+6
|
* uhd: Add ability to get and set command time through dboard_iface.michael-west2015-04-0320-32/+152
| | | | | This creates a wb_iface child class called timed_wb_iface, which adds support for timed commands.
* docs: e3x0: Add a paragraph on writing the sdcard.Moritz Fischer2015-03-301-9/+17
| | | | | | | This also fixes some numbering issues in hte paragraphs yocto paragraphs. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* x300: Fix for Bug #714: Phase wobble across four channels on two devicesNeel Pandeya2015-03-301-1/+1
| | | | - Increased filter loop bandwith on clock control chip
* db_tvrx2: fixed boost::format bugMarcus Müller2015-03-301-1/+1
|
* usrp1: fixed check for loaded firmwareNicholas Corgan2015-03-271-2/+3
|
* Warning fixesNicholas Corgan2015-03-2741-129/+143
| | | | | | | * CMake now not applying C++ flags to C files * GCC 4.4: anti-aliasing rules * MSVC: narrowing, differences in subclass function parameters * Clang: uninitialized variables
* doxygen: ignore NI-RIO filesNicholas Corgan2015-03-241-1/+2
|
* imgs_downloader: Copy pkg to temp dir even if it is localAshish Chaudhari2015-03-181-3/+4
|
* b200: Updated hashing algorithm for platform consistencydcaswell2015-03-161-3/+5
| | | | Now identical between 32- and 64-bit platforms.
* b200: Fixed var name typoMartin Braun2015-03-131-1/+1
|
* docs: Moved IMU image to correct locationMartin Braun2015-03-121-0/+0
|
* e300: Fix missing namespace prefixes.Moritz Fischer2015-03-123-6/+6
| | | | | | | In several files we were lacking boost:: namespace prefixes, which led to build failures on certain configurations. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* uhd: Fixed several type-cast related warnings for naggy compilersMartin Braun2015-03-1110-49/+49
|
* uhd: Fixed multiple compiler warnings (unused variables, missing literal f)Martin Braun2015-03-117-13/+13
|
* uhd: Fixed some punctuation-related compiler warningsMartin Braun2015-03-113-9/+9
|
* b200: Initialize _tick_rate properly to force tick rate updateMartin Braun2015-03-111-1/+2
|
* docs: Added E3x0 IMU imageMartin Braun2015-03-111-0/+0
|
* cmake: Skip building fx3 utils if B200 is disabledMartin Braun2015-03-101-6/+11
|
* e300: comment out unused variables in control::make when E300_NATIVE is not ↵Michael Dickens2015-03-091-1/+1
| | | | defined.
* cmake: for APPLE only, fix default values for CMAKE_INSTALL_NAME_DIR and ↵Michael Dickens2015-03-091-2/+2
| | | | CMAKE_INSTALL_RPATH.
* cmake: restored compatibility with CMake 2.6Nicholas Corgan2015-03-053-1/+139
|
* N2x0: Fixed missing usage of send_buff_sizeMartin Braun2015-03-033-3/+6
|
* uhd: Fixed: Exception during detection kills device::makeMarcus Müller2015-03-032-10/+17
| | | | | | | | On systems with libusb but not USB, device detection for USB devices fails (lsusb itself dies with "error -99"). This crashes the device detection process itself. Also made the documentation for ::make match what it actually does.
* e300: fc: Clean up the TX flowcontrol setup a bit.Moritz Fischer2015-02-262-1/+8
| | | | | | | Use named constant instant of magic constant for response frequency. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: fc: This should fix the RX flow control.Moritz Fischer2015-02-262-7/+34
| | | | | | | | Two issues: - Call the correct overflow handler e300_impl vs rx_vita - Don't lie about buffer sizes and window sizes Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* docs: updated libusb and static lib infoNicholas Corgan2015-02-211-3/+3
| | | | | * windows: point to appropriate libusb version instead of libusbx * cmake: fixed command for static library build
* b200: removed CMakeLists copy&paste B100 remainsMarcus Müller2015-02-181-1/+1
|
* uhd: uhd_usrp_probe: added bandwidth ranges to RX output, if availableMarcus Müller2015-02-181-0/+5
|
* cmake: Fixed trimmed versionMartin Braun2015-02-181-2/+6
|
* b200: Revised configuration of AD9361 for master_clock_rates >56e6MHz. ↵Ian Buckley2015-02-171-10/+10
| | | | Issues #649 & #691
* docs: Changed ISE version for usrp3 devices to 14.7Ashish Chaudhari2015-02-161-1/+1
|
* usrp2: fixed image compatibility error messageNicholas Corgan2015-02-161-1/+1
| | | | * Point to usrp2_card_burner_gui.py instead of usrp2_card_burner.py
* UBX: Revert LO shutdown method in ubx_xcvr destructormichael-west2015-02-161-4/+4
|
* UBX: Serialize SPI transactionsmichael-west2015-02-161-27/+31
|
* Merge pull request #696 from EttusResearch/crymble/bug692Ashish Chaudhari2015-02-121-1/+3
|\ | | | | b200: Bugfix#692: b200_find now returns an empty device vector when hint...
| * b200: Bugfix#692: b200_find now returns an empty device vector when hint ↵mcrymble2015-02-061-1/+3
| | | | | | | | contains addr0/resource0/etc style keys.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 16:39:28 +0000