uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	Merge branch 'maint'	Martin Braun	2014-08-18	6	-57/+43
\|\
\| *	Bumping FPGA compat to 7.	michael-west	2014-08-18	1	-1/+1
\| \|
\| *	Changed analog delay on DAC reference and radio clocks from 1075ps to 900ps	michael-west	2014-08-18	1	-4/+4
\| \|
\| *	- Fixes for channel alignment	michael-west	2014-08-18	5	-56/+42
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	- Added analog delay for radio clock - Added analog delay for DAC reference clocks - Removed resetting of clock control - Removed setting of reference clock and PPS to external sources during initialization - Fixes for set_time_unknown_pps - Removed wait for PPS edge after setting time from GPSDO - Changed set_time_unknonw_pps to time out based on system time rather than device VITA time
* \|	Merge branch 'maint'	Martin Braun	2014-08-18	4	-4/+4
\|\\|
\| *	Restoring compatibility with CMake 2.6	Nicholas Corgan	2014-08-14	4	-4/+4
\| \| \| \| \| \| \| \| \| \|	* The UNSET command didn't exist back then, but using SET with no value does the same thing * CMake 2.6 doesn't like nested parantheses in IF statements, so tweak IF/ELSE statements
* \|	Merge branch 'master' into ashish/cat_refactor_master	Ashish Chaudhari	2014-08-05	4	-11/+35
\|\ \
\| * \|	Merge branch 'maint'	Martin Braun	2014-07-31	4	-11/+35
\| \|\\| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/utils/usrp_burn_mb_eeprom.cpp
\| \| *	Merge branch 'maint' into uhd/bug492	michael-west	2014-07-30	7	-49/+167
\| \| \|\ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/b200/b200_impl.cpp
\| \| \| *	tx fe corrections: fixing mixed tabs / spaces, other horrible whitespace cruft	Ben Hilburn	2014-07-25	2	-14/+11
\| \| \| \|
\| \| \| *	Merge 'maint' into x300/bug513	Ben Hilburn	2014-07-25	2	-3/+4
\| \| \| \|\
\| \| \| * \|	X300: Added UHD support for TX FE	Ian Buckley	2014-07-18	2	-1/+14
\| \| \| \| \|
\| \| * \| \|	Fix for BUG #492: UHD: set_time_unknown_pps() fails with GPSDO installed	michael-west	2014-06-25	3	-3/+17
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	- Added polling for PPS time change after setting time from GPSDO.
* \| \| \| \|	b200: Added variable rate SPI core for AD9361 and ADF4001	Ashish Chaudhari	2014-08-01	8	-8/+159
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	- Added b200_local_spi core that adjusts the divider when talking to the two chips - AD9361 rate is 1MHz and ADF4001 rate is 10kHz
* \| \| \| \|	b200: Moved AD9361 driver to host	Ashish Chaudhari	2014-08-01	18	-131/+2872
\|/ / / / \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	- Switched to FPGA SPI engine - Moved firmware AD9361 driver to UHD - Bumped FW compat to 5, FPGA compat to 4 - Known Issue: AD9361 SPI rate is too slow
* \| \| /	OctoClock firmware upgrade, added host driver	Nicholas Corgan	2014-07-23	18	-27/+1263
\| \|_\|/ \|/\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	* OctoClock can communicate with UHD over Ethernet * Can read NMEA strings from GPSDO and send to host * Added multi_usrp_clock class for clock devices * uhd::device can now filter to return only USRP devices or clock devices * New OctoClock bootloader can accept firmware download over Ethernet * Added octoclock_burn_eeprom,octoclock_firmware_burner utilities * Added test_clock_synch example to show clock API
* \| \|	Commented out warning if X300 reference clock fails to lock within 1 second ↵	michael-west	2014-07-22	1	-2/+3
\| \| \| \| \| \| \| \| \| \| \| \|	during initialization. Sometimes it takes longer and that is OK.
* \| \|	Fix for BUG #517: B200: Regression of power level on RX	michael-west	2014-07-22	1	-1/+1
\| \|/ \|/\| \| \| \| \|	- Fixed scalar for RX DSP core
* \|	Updated copyright year.	michael-west	2014-07-17	1	-1/+1
\| \|
* \|	Fix for BUG #469	michael-west	2014-07-17	1	-0/+2
\| \| \| \| \| \| \| \|	- Added mutex for write_uart()
* \|	- Changed variables from uint8_t to uint32_t so parsing of hex strings would ↵	michael-west	2014-07-17	1	-3/+3
\| \| \| \| \| \| \| \|	work properly.
* \|	Addressing comments from review.	michael-west	2014-07-17	2	-15/+21
\| \| \| \| \| \| \| \| \| \| \| \|	- Corrected types of some variables to be boost types. - Removed debugging code accidentally left in. - Changed some compiled out error messages to log messages.
* \|	Fix for BUG #469: Bad/Empty GPS NMEA strings returned when the queries are ↵	michael-west	2014-07-17	2	-20/+108
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	made in a random wait iterative fashion Fix for BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OK - Added checksum verification of NMEA strings - Improved handling of short or malformed strings - Fixed GPSDO data synchronization between X300 firmware and host
* \|	Merge branch 'origin/b200/bug516' into maint	Ben Hilburn	2014-07-17	1	-4/+4
\|\ \ \| \| \| \| \| \| \| \| \|	Fixing B200 clock rate float compare.
\| * \|	BUG #516: B210: Fails to Run with 30.72 MHz Clock	michael-west	2014-07-10	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \|	- Addressed feedback from review.
\| * \|	Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clock	michael-west	2014-06-18	1	-3/+3
\| \| \| \| \| \| \| \| \| \| \| \|	- Corrected clock rate checks for B2x0
\| * \|	Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clock	michael-west	2014-06-18	1	-3/+3
\| \|/ \| \| \| \| \| \|	- Corrected clock rate checks for B2x0
* \|	Merge branch 'origin/ashish/rx_pcie_overflows' into maint	Ben Hilburn	2014-07-17	2	-3/+7
\|\ \
\| * \|	x300: Bugfix for overflows on PCIe at 200MS/s	Ashish Chaudhari	2014-06-27	2	-3/+7
\| \|/
* \|	Merge branch 'origin/b200/bug512' into maint	Ben Hilburn	2014-07-17	1	-9/+15
\|\ \ \| \| \| \| \| \| \| \| \|	B200 now creates internal PPS. Depends on FPGA change.
\| * \|	Enhancement #512: B210: Need an Internal PPS	michael-west	2014-06-13	1	-9/+15
\| \| \| \| \| \| \| \| \| \| \| \|	- Added support for internal PPS selection (set as default)
* \| \|	Fix for BUG #527: N200: 50 Msps results in two tones	michael-west	2014-07-01	1	-1/+2
\| \|/ \|/\| \| \| \| \|	- Adjusted check to enable first half-band filter only if the rate is decimated enough between the CIC and other half-band filter
* \|	Merge branch 'origin/b200/bug500' into maint - Fixing B200 phase alignment issue	Ben Hilburn	2014-06-16	3	-3/+9
\|\ \
\| * \|	- Changed XOR to OR for REG_DSP_RX_MUX flags.	michael-west	2014-06-12	1	-3/+3
\| \| \|
\| * \|	Fix for BUG #500: B210: RX channels are not phase aligned	michael-west	2014-06-06	3	-3/+9
\| \| \| \| \| \| \| \| \| \| \| \|	- Adding UHD side code to invert second RX channel
* \| \|	Fix issue with "item32" registered size, Bug 466.	Ben Hilburn	2014-06-13	1	-0/+3
\|\ \ \ \| \|_\|/ \|/\| \|
\| * \|	UHD: Addressing Bug 466, as per Balint.	Ben Hilburn	2014-05-22	1	-0/+3
\| \| \|
* \| \|	Do not set the mfloat-soft flag during the test for arm_neon.h.	Philip Balister	2014-06-03	1	-7/+0
\|/ / \| \| \| \| \| \| \| \| \| \| \| \|	Use the flags passed in from the toolchain. If this test runs on a hard-float system, bad things happen. Signed-off-by: Philip Balister <philip@opensdr.com>
* /	Lots of bit-specific type work to fix compilation on older OSes.	Ben Hilburn	2014-05-21	4	-15/+15
\|/
*	x300: adding include to fix builds on older systems	Ben Hilburn	2014-05-20	1	-0/+1
\|
*	Fixing Bug #473 - Autoselection of VCO Frequency in DBSRX2	Ben Hilburn	2014-05-20	1	-6/+8
\|\
\| *	Fixed whitespace and added comment.	michael-west	2014-05-20	1	-5/+6
\| \|
\| *	Fix for BUG 473: UHD: DBSRX2 VCO Autoselect Failing / Wrong Frequency Range	michael-west	2014-05-13	1	-3/+4
\| \| \| \| \| \| \| \| \| \|	- Corrected frequency range for DBSRX2 - Corrected register write order when changing frequency
* \|	x300: Fixing Bug 456 - backwards LED colors.	Ben Hilburn	2014-05-20	1	-2/+2
\|\ \
\| * \|	Fix for BUG 456: LED TX/RX colors backwards on X300	michael-west	2014-05-16	1	-2/+2
\| \|/ \| \| \| \| \| \|	- Corrected bit masks so TX will light the red LED and RX will light the green LED
* \|	BUG #465: UHD: "Error: Connection refused" for USRP1 and B100	michael-west	2014-05-14	1	-0/+5
\| \| \| \| \| \| \| \|	- Added catch for unhandled error
* \|	log: replaced usage of deprecated boost::filesystem function	Nicholas Corgan	2014-05-12	1	-3/+3
\|/
*	Merge branch 'origin/martin/multi_usrp/bug_dc_offset' into maint	Ben Hilburn	2014-05-08	1	-5/+25
\|\
\| *	multi_usrp: Throws warnings for some tree props	Martin Braun	2014-05-05	1	-5/+25
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Until now, multi would simply access some property and assume it exists. A call for set_tx_dc_offset() on a B210 would thus throw errors. This checks for B-series-only leaf nodes before doing anything and displays a warning instead.
* \|	BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OK	michael-west	2014-05-06	1	-1/+8
\| \| \| \| \| \| \| \| \| \| \| \|	- It was found that strings containing only a newline character were being returned by N-series and X-series devices. - Added better handling of strings received under 6 bytes. - Added erasing of end of line characters.