aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* convert: Add sc16-sc16 SSE converterTom Tsou2015-05-112-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | The sc16-sc16 wire to host type converter is effectively an I/Q swap or 16-bit byteswap for little and big endian cases respectively. This implmentation is a subset of fc32 and fc64 converters without the floating point portion and scaling. The resulting byte ordering is as follows: ----------------- | A | B | C | D | Wire ----------------- 0 1 2 3 ----------------- | C | D | A | B | Litte-endian ----------------- 0 1 2 3 ----------------- | B | A | D | C | Big-endian ----------------- 0 1 2 3 Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* b200: Changed the max byte rate over USB2Marcus Müller2015-05-061-2/+1
| | | | | Max rate is now set to 53248000, allowing for more than 8MS/s, which is closer to the actual value that USB2 can handle.
* B200: Made find function properly ignore missing "product" value (BUG #770)michael-west2015-05-051-3/+1
|
* e300: gps: If gps doesn't have lock return 0 as time.Moritz Fischer2015-05-012-11/+7
| | | | Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: gps: Keep antenna power supply and pps running all the time.Moritz Fischer2015-05-012-6/+3
| | | | | | | | This is a change from behaviour so far. Before the GPS was only on while UHD is running. This behaviour was confusing users, and didn't match our other devices. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: gps: If gps is detected, set device time to gps time on init.Moritz Fischer2015-05-011-0/+11
| | | | | | | Before the device time wasn't set for E310 on initialization. This will allow 'query_gpsdo_sensors' to pass if gps has lock. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* b200: Fixed compiler warningMartin Braun2015-04-301-2/+2
|
* b200: Added convenience subdev override for consistent subdev experienceMartin Braun2015-04-273-22/+29
|
* b200: Fixed FE swapping registerMartin Braun2015-04-242-5/+19
|
* ubx: pfd frequency fix (relevant for X300 operation)Michael West2015-04-231-0/+2
|
* b200: Bumped FPGA compat number to 6Ashish Chaudhari2015-04-231-1/+1
|
* Merge branch 'maint' into mwest/b200_rev5Ashish Chaudhari2015-04-234-5/+28
|\
| * USRP2: Separate FPGA compat numbers for USRP2 and N200.michael-west2015-04-232-3/+25
| |
| * b200: Boost 1.58-related fixes in B200 IO code.Michael Dickens2015-04-201-2/+2
| | | | | | | | | | | | When returning an invalid payload in handle_async_task, Boost 1.58 does not allow NULL to be returned; instead, to be more compatible, use the correct type initialized to (0, []).
| * uhd: Fixed missing includeMartin Braun2015-04-201-0/+1
| |
* | B200: Bumped FPGA compat number to 5michael-west2015-04-172-5/+7
| | | | | | | | B200: Added bit to SR_MISC_OUT register to control ATR mapping from radio to frontend
* | b2x0: Cleaned up device lookup (moved all constants to one place)Martin Braun2015-04-163-47/+84
| | | | | | | | | | | | Conflicts: host/lib/usrp/b200/b200_iface.hpp host/lib/usrp/b200/b200_impl.cpp
* | B200: Stricter checking of product and revision for frontend mapping.michael-west2015-04-152-11/+15
| |
* | UHD host code changes for B200 rev 5 support.michael-west2015-04-152-13/+26
| |
* | B200: UHD now detects loaded FW on NI-USRP devicesBen Hilburn2015-04-151-0/+1
|/ | | | | Conflicts: host/lib/transport/libusb1_base.cpp
* e300: Added warning for high bandwidth usageMartin Braun2015-04-141-0/+10
|
* b200: Added warning for high bandwidth usageMartin Braun2015-04-141-0/+10
|
* ad9361: Removed recommended max clock rate warningMartin Braun2015-04-143-9/+4
|
* dboards: Fixed type deduction for older compilers on max287x codeMichael West2015-04-141-6/+6
|
* Increase command FIFO depth of N2x0 and X3x0 to 64.michael-west2015-04-103-4/+4
|
* UBX Phase Synchronization Supportmichael-west2015-04-101-64/+187
| | | | - Added configuration and assertion of SYNC signal
* X300: Change dboard clock rate to 50 MHzmichael-west2015-04-104-345/+480
|
* Fix for BUG #683: UHD: Need to factor out MAX287x code for UBX and CBXmichael-west2015-04-104-714/+918
| | | | | - Factored out MAX287x code into common header file - Added necessary code for MAX2871 synchronization.
* usrp1: codec_ctrl: Fix compiler warning.Moritz Fischer2015-04-101-1/+1
| | | | | | Use std::abs() instead of abs(). Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: remote_codec_ctrl: Fixed typo in error messageMoritz Fischer2015-04-081-1/+1
|
* B200: Change Catalina Reg 0x06 for RX data setup/hold timing issue @ ↵Ian Buckley2015-04-061-1/+1
| | | | 30.72MHz. Issue #726
* e100: Support command time access through dboard_iface.michael-west2015-04-032-6/+6
|
* uhd: Add ability to get and set command time through dboard_iface.michael-west2015-04-0318-31/+120
| | | | | This creates a wb_iface child class called timed_wb_iface, which adds support for timed commands.
* x300: Fix for Bug #714: Phase wobble across four channels on two devicesNeel Pandeya2015-03-301-1/+1
| | | | - Increased filter loop bandwith on clock control chip
* db_tvrx2: fixed boost::format bugMarcus Müller2015-03-301-1/+1
|
* usrp1: fixed check for loaded firmwareNicholas Corgan2015-03-271-2/+3
|
* Warning fixesNicholas Corgan2015-03-2727-92/+105
| | | | | | | * CMake now not applying C++ flags to C files * GCC 4.4: anti-aliasing rules * MSVC: narrowing, differences in subclass function parameters * Clang: uninitialized variables
* b200: Updated hashing algorithm for platform consistencydcaswell2015-03-161-3/+5
| | | | Now identical between 32- and 64-bit platforms.
* b200: Fixed var name typoMartin Braun2015-03-131-1/+1
|
* e300: Fix missing namespace prefixes.Moritz Fischer2015-03-123-6/+6
| | | | | | | In several files we were lacking boost:: namespace prefixes, which led to build failures on certain configurations. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* uhd: Fixed several type-cast related warnings for naggy compilersMartin Braun2015-03-114-6/+6
|
* uhd: Fixed multiple compiler warnings (unused variables, missing literal f)Martin Braun2015-03-114-9/+9
|
* b200: Initialize _tick_rate properly to force tick rate updateMartin Braun2015-03-111-1/+2
|
* e300: comment out unused variables in control::make when E300_NATIVE is not ↵Michael Dickens2015-03-091-1/+1
| | | | defined.
* N2x0: Fixed missing usage of send_buff_sizeMartin Braun2015-03-033-3/+6
|
* uhd: Fixed: Exception during detection kills device::makeMarcus Müller2015-03-031-9/+14
| | | | | | | | On systems with libusb but not USB, device detection for USB devices fails (lsusb itself dies with "error -99"). This crashes the device detection process itself. Also made the documentation for ::make match what it actually does.
* e300: fc: Clean up the TX flowcontrol setup a bit.Moritz Fischer2015-02-262-1/+8
| | | | | | | Use named constant instant of magic constant for response frequency. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* e300: fc: This should fix the RX flow control.Moritz Fischer2015-02-262-7/+34
| | | | | | | | Two issues: - Call the correct overflow handler e300_impl vs rx_vita - Don't lie about buffer sizes and window sizes Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* b200: removed CMakeLists copy&paste B100 remainsMarcus Müller2015-02-181-1/+1
|
* b200: Revised configuration of AD9361 for master_clock_rates >56e6MHz. ↵Ian Buckley2015-02-171-10/+10
| | | | Issues #649 & #691
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:32:55 +0000