uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	uhd: switch the reusable barrier to condition variables	Josh Blum	2013-04-12	2	-16/+12
\| \| \| \| \| \|	This allows the converter threads in a multi-threaded streamer to wait quietly. In addition, the use of two barriers in the packet handlers was reduced to one, by adding a simple exit barrier inside the reusable barrier's wait method.
*	uhd: fixes for time_spec's to_ticks and from_ticks calls	Josh Blum	2013-04-12	1	-6/+8
\| \| \| \| \| \| \| \|	The fixes address rouding issues when the tick_rate is a non-integer. Conflicts: host/tests/time_spec_test.cpp
*	e100: switch to fixed length xfers	Josh Blum	2013-03-25	4	-14/+18
\|
*	usrp1: fix eeprom write capability through fx2	Josh Blum	2013-03-25	1	-11/+0
\| \| \| \| \|	The vectorized eeprom write was faster but broken, removed overload which falls back to the one byte at a time.
*	Merge branch 'maint34' into maint	Nicholas Corgan	2013-02-28	2	-0/+45
\|\
\| *	Added Windows DLL resource file to insert version into DLL	Nicholas Corgan	2013-02-28	2	-0/+45
\| \|
* \|	lib: addresses B100 FIFO timeout error	Nicholas Corgan	2013-02-27	1	-1/+1
\| \|
* \|	udp: fix ENOBUFS with send/retry for udp socket	Josh Blum	2013-01-15	1	-2/+16
\| \|
* \|	Merge branch 'maint34' into maint	Nicholas Corgan	2012-12-18	2	-2/+13
\|\\|
\| *	Merge branch 'xcvr2450_r21' into maint34	Nicholas Corgan	2012-12-18	1	-1/+12
\| \|\
\| \| *	Fix syntax in XCVR driver.	Nick Foster	2012-12-04	1	-3/+3
\| \| \|
\| \| *	xcvr2450: created xcvr2450 r21 that uses external divider	Josh Blum	2012-12-04	1	-1/+12
\| \| \|
\| * \|	wbx: expand freq range low for r4	Josh Blum	2012-12-17	1	-1/+1
\| \|/
* \|	Merge branch 'maint34' into maint	Nicholas Corgan	2012-11-16	10	-20/+120
\|\\| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/b100/b100_impl.cpp host/lib/usrp/usrp1/usrp1_impl.hpp
\| *	lib/cmake: CPack source work	Nicholas Corgan	2012-11-16	11	-22/+121
\| \| \| \| \| \| \| \| \| \|	* Removed all host code dependencies on firmware headers * Put in CMake settings for CPack source
\| *	wbx: updating the code to allow full range of the VCO.	Ben Hilburn	2012-11-07	1	-1/+1
\| \|
\| *	wbx v4: fixing the drivers for the new rev of the WBX board	Ben Hilburn	2012-11-07	2	-32/+41
\| \|
* \|	wbx: updating the code to allow full range of the VCO.	Ben Hilburn	2012-11-06	1	-1/+1
\| \|
* \|	wbx v4: fixing the drivers for the new rev of the WBX board	Ben Hilburn	2012-11-06	2	-32/+41
\| \|
* \|	uhd: added barrier interrupt to work around thread issue	Josh Blum	2012-10-29	2	-0/+4
\| \| \| \| \| \| \| \| \| \|	Force the barrier wait to throw a boost::thread_interrupted The threads were not getting the interruption_point on windows.
* \|	utils: USRP N2XX Simple Net Burner	Nicholas Corgan	2012-10-10	2	-5/+4
\| \| \| \| \| \| \| \| \| \|	* More automated C++ implementation of usrp_n2xx_net_burner.py * By default, installs images from standard image install directories
* \|	Merge branch 'maint'	Josh Blum	2012-10-05	2	-4/+6
\|\\|
\| *	usrp: ensure that actual_scalar does not rollover	Josh Blum	2012-10-05	2	-4/+6
\| \| \| \| \| \| \| \| \| \| \| \|	For certain decimations/interpolations, the scale factor adjustment may be greater than 1.0. The > 1.0 factor needs to be adjusted out in the host.
* \|	lfrx: disable dc offset correction when using LFRX	Josh Blum	2012-09-28	4	-0/+12
\| \|
* \|	usrp: added CIC warning to DSP rx and tx	Josh Blum	2012-09-28	2	-0/+18
\| \|
* \|	tvrx2: reverted broken changes to tuning logic	Josh Blum	2012-09-28	1	-25/+8
\| \|
* \|	usrp: fix gain group typo on multi-usrp	Josh Blum	2012-09-20	1	-1/+1
\| \|
* \|	usrp1: added hook to poke user regs	Josh Blum	2012-09-20	2	-0/+13
\| \|
* \|	Merge branch 'maint'	Josh Blum	2012-09-11	1	-1/+1
\|\\|
\| *	usrp: fix rx dsp core scaling factor off by 2	Josh Blum	2012-09-11	1	-1/+1
\| \| \| \| \| \| \| \|	The scale factor is a 18 bit number, this should be 1 << 17
* \|	First pass at getting tune_request_t to control IF freq in TVRX2	Jason Abele	2012-09-04	2	-8/+36
\| \|
* \|	Merge branch 'next'	Josh Blum	2012-08-31	26	-1105/+909
\|\ \
\| * \	Merge branch 'master' into next	Josh Blum	2012-08-23	1	-0/+1
\| \|\ \
\| * \ \	Merge branch 'master' into next	Josh Blum	2012-08-09	7	-3/+26
\| \|\ \ \
\| * \| \| \|	b100: removed unused files from merge	Josh Blum	2012-08-04	3	-402/+0
\| \| \| \| \|
\| * \| \| \|	Merge branch 'master' into next	Josh Blum	2012-08-04	2	-2/+19
\| \|\ \ \ \
\| * \| \| \| \|	e100: added extra error message for FPGA not found	Josh Blum	2012-07-19	1	-1/+8
\| \| \| \| \| \|
\| * \| \| \| \|	b100/e100: clock source option for pps phase sync abuse	Josh Blum	2012-07-19	2	-0/+26
\| \| \| \| \| \|
\| * \| \| \| \|	e100: ctrl impl changes for header offset	Josh Blum	2012-07-16	1	-2/+2
\| \| \| \| \| \|
\| * \| \| \| \|	e100: cleanup and make better use of IRQ gpio for control response	Josh Blum	2012-07-16	1	-50/+45
\| \| \| \| \| \|
\| * \| \| \| \|	e100: squashed host code for fifo control/timed commands	Josh Blum	2012-07-16	8	-364/+272
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This uses the new b100/e100 common core and FIFO control modules. Subsequent commit will be the compatible FPGA merge. Conflicts: host/lib/usrp/e100/io_impl.cpp
\| * \| \| \| \|	Merge branch 'master' into next	Josh Blum	2012-07-16	3	-4/+13
\| \|\ \ \ \ \
\| * \| \| \| \| \|	uhd: make range_t a lightweight object	Josh Blum	2012-07-04	1	-15/+6
\| \| \| \| \| \| \|
\| * \| \| \| \| \|	b100: squashed host code for fifo control/timed commands	Josh Blum	2012-07-02	6	-215/+99
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This uses the new b100/e100 common core and FIFO control modules. Subsequent commit will be the compatible FPGA merge.
\| * \| \| \| \| \|	usrp: added fifo_ctrl_excelsior for FIFO control + async msgs	Josh Blum	2012-07-02	3	-1/+358
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The fifo_ctrl_excelsior is the host code for dealing with E100/B100 control messages and async messages. It also has the SPI implementation. Timed commands are implemented on top of this code.
\| * \| \| \| \| \|	transport: multi-threaded send_packet_handler	Josh Blum	2012-07-02	1	-25/+77
\| \| \| \| \| \| \|
\| * \| \| \| \| \|	transport: multi-threaded recv_packet_handler	Josh Blum	2012-07-02	1	-22/+71
\| \| \| \| \| \| \|
\| * \| \| \| \| \|	transport: switch to the atomic claimer	Josh Blum	2012-07-02	3	-66/+3
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This wont have much effect because the buffers are not currently used in any queue by the caller
* \| \| \| \| \| \|	cal: dont interpolate if freq is the same +/- epsilon	Josh Blum	2012-08-29	1	-0/+12
\| \|_\|_\|_\|/ / \|/\| \| \| \| \|
* \| \| \| \| \|	usrp2: fix program_stream_dest (arp for dest)	Josh Blum	2012-08-14	1	-0/+1
\| \|_\|_\|/ / \|/\| \| \| \| \| \| \| \| \| \| \| \| \| \|	The send buffer should be reset ASAP so it gets flushed out.