aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
...
* chdr: Fix u64_to_host vs. u64_from_host usageMartin Braun2021-01-111-1/+1
|
* rfnoc: Add accessors for item width and nipc for NSSWade Fife2021-01-112-0/+23
| | | | | | - Add get_item_width() and get_nipc() methods to the Null/Source/Sink block controller. - Add missing enumerated types for get_count() method.
* uhd: Split radio_control into rf_control interfacesLane Kolbly2021-01-1111-76/+237
| | | | | | These rf_control interfaces allow easier implementation of radio controls as well as allowing easier sharing of code for implementing e.g. gain_profile.
* Create C++ wrappers for MPM RPC callsLane Kolbly2021-01-115-37/+194
| | | | | | | | | This gives us type-safety, as well as allowing us to create unit tests for RFNoC radio_controls without having to create actual RPC servers and clients in the unit tests. This change also fixes a bug in mpmd_mb_controller::set_sync_source, where it was calling the wrong MPM function.
* uhd: revert "Check property type at access..."Steven Koo2021-01-081-25/+1
| | | | | | | | | | This change reverts cb9329a681552e6ac6277d16e1627afcbb23e637. The type checking is causing some conversion issues on clang/macos. The type_index checking doesn't work correctly across shared libraries and should not be relied on to verify type, since it can vary from compiler to compiler. Signed-off-by: Steven Koo <steven.koo@ni.com>
* usrprio: catch exceptions if rpc data read failsSteven Koo2020-12-211-3/+17
| | | | | | | | | This is an unhandled exception case that can cause silent failures for detecting ethernet x310 devices if the niusrpriorpc service is enabled. The "out_args >> vtr_size" read can throw an exception if there are no PCIe devices connected. Signed-off-by: Steven Koo <steven.koo@ni.com>
* fixup! RFNoC: Handle receive of 0 samplesmichael-west2020-12-211-3/+3
|
* rfnoc: Fix remote stream buffer formatWade Fife2020-12-211-0/+18
| | | | | | | | When configuring remote streams, we were setting the format at the source stream endpoint, but not at the destination stream endpoint. Therefore, the destination used the default or whatever it was set to during a previous run. This change sets the format at the destination stream to match the format of the source stream.
* uhd: throw error if edge list is emptyGrant Meyerhoff2020-12-211-0/+8
|
* rfnoc: Fix time conversion in ctrlport_endpoint sleep methodCiro Nishiguchi2020-12-211-2/+4
|
* RFNoC: Handle receive of 0 samplesmichael-west2020-12-102-0/+11
| | | | | | | Returns immediately if requested number of samples is zero. Prevents timeout error from being thrown if user requests no samples. Signed-off-by: michael-west <michael.west@ettus.com>
* RFNoC: Demoted zero sample error to warningmichael-west2020-12-102-7/+14
| | | | | | | | Requesting zero samples was resulting in an error and causing applications to crash. This was a change frome previous versions of UHD. Demoted to warning so applications continue as they did before. Signed-off-by: Michael West <michael.west@ettus.com>
* fixup! N310: Low band IF adjustmentsmichael-west2020-12-091-1/+1
|
* python: Add find() to the Python APIMartin Braun2020-12-072-0/+28
| | | | | | | | | | | | This a mapping of uhd::device::find() into uhd.find() on the Python side. The uhd::device is intentionally not mapped into Python (prefer MultiUSRP or RfnocGraph instead), so the namespace is moved up one level. Example: >>> import uhd >>> # Now print the device args for all found B200s: >>> for dev_args in uhd.find("type=b200")): print(dev_args.to_string())
* mpmd: Export RPC token and mb_args to the property treeMartin Braun2020-12-043-0/+13
| | | | | | There are applications (typically for debugging purposes) which need access to the token and the mb_args. They are thus published via the property tree.
* multi_usrp_rfnoc: Serialize make_rfnoc_deviceAaron Rossetto2020-12-041-1/+24
| | | | | | | | | | | | | | | In certain execution environments (e.g. NI's LabVIEW), the instantiation of multi_usrp objects may execute in parallel in two different threads. As the RFNoC block instances are shared between the multi_usrp instances, there is a risk that threads racing to configure the initial state of the Tx and Rx chains may operate on inconsistent or incomplete views of the state of the RFNoC blocks that make up the chain, leaving them in an invalid state that leads to client-facing errors. This commit serializes calls to make_rfnoc_device to prevent creating multiple multi_usrp objects in parallel. It also creates a map of existing multi_usrp devices and returns the existing multi_usrp object if it exists.
* python: Make TuneRequest implicitly convertible from doubleMartin Braun2020-12-011-0/+1
| | | | | | | | | | This allows to do the following: >>> usrp = uhd.usrp.MultiUSRP(args) >>> usrp.set_tx_frequency(1e9) In the past, you would have to manually convert the frequency to a uhd.types.TuneRequest before passing it to set_?x_frequency(). This new behaviour makes Python match the C++ behaviour.
* python: multi_usrp: Let get_tree() return a raw pointerMartin Braun2020-12-011-1/+1
| | | | | | | | | | | | | | | | | | This changes the Python version of MultiUSRP.get_tree() such that it returns a raw pointer to the tree instead of returning the sptr. This fixes an issue where calling get_tree() will reliably cause a segfault during garbage collection, at least on some USRPs. The downside of this approach is that storing the return value from get_tree() can produce a dangling pointer when the underlying object is destroyed. It's still better than segfaults, and the recommended way to use get_tree() anyway is not to store the return value (unless it's in a local scope), but tack on property tree methods to get_tree() itself. Examples: >>> usrp = uhd.usrp.MultiUSRP('...') >>> usrp.get_tree().exists('/path/to/prop') # This is fine This change has no noticable API changes.
* python: Improve access to device_addr_tMartin Braun2020-11-232-1/+9
| | | | | | | | This makes two changes: - Add device_addr_t as a type that the Python property tree access can handle - Add a to_dict() call to device_addr_t (in Python) that will return a regular dictionary from a device_addr_t for a more Pythonic access.
* python: multi_usrp: Fix get_radio_control()Martin Braun2020-11-231-1/+1
| | | | | | | | This function was incorrectly wrapped into Python and would fail with Python saying it can't hold a reference to the radio block. This changes the wrapping into returning a raw pointer, but also makes the return value policy reference_internal so that garbage collection happens in the right order.
* graph: Restore default resolver callback at node removalAaron Rossetto2020-11-203-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default resolve callback behavior for a newly-instantiated `node_t` object resolves all dirty properties associated with the node, then marks the properties as clean. When the node is added to a graph, its resolver callback is updated to use the graph property propagation algorithm in `graph_t::resolve_all_properties()`, which is considerably more sophisticated and relies on the graph topology to do its work. When a connection between two nodes is broken via the `graph::disconnect()` method, nodes which no longer have incoming or outgoing edges (connections) are removed from the graph. Prior to this change, the removed node's resolver callback was left pointing at the graph property propagation algorithm. In certain use cases, this could result in unexpected client-facing behavior. Consider, for example, this code (incomplete and for illustrative purposes only) which creates a streamer on one transmit chain of a multi-channel device, destroys that streamer, then creates a stream on the other transmit chain. Attempting to set the TX rate on the first chain after destroying the streamer does not result in the expected rate change, despite the same code working correctly before creating the streamer: constexpr size_t CH0 = ..., CH1 = ...; uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(...); // Set a TX rate on both chains; this succeeds usrp->set_tx_rate(initial_rate, CH0); usrp->set_tx_rate(initial_rate, CH1); assert(initial_rate == usrp->get_tx_rate(CH0)); assert(initial_rate == usrp->get_tx_rate(CH1)); // Create a TX streamer for channel 0 std::vector<size_t> chain0_chans{CH0}; stream_args_t sa; sa.channels = chain0_chans; sa.otw_format = ...; sa.cpu_format = ...; uhd::tx_streamer::sptr txs = usrp->get_tx_stream(sa); // Destroy the first streamer (disconnecting the graph) and // create a streamer for channel 1 txs.reset(); std::vector<size_t> chain1_chans{CH1}; sa.channels = chain1_chans; txs = usrp->get_tx_stream(sa); // Now try to set a new TX rate on both chains usrp->set_tx_rate(updated_rate, CH0); usrp->set_tx_rate(updated_rate, CH1); assert(updated_rate == usrp->get_tx_rate(CH0)); // <--- FAILS assert(updated_rate == usrp->get_tx_rate(CH1)); The reason this fails is because the second call to `set_tx_rate()` on channel 0 internally sets the 'interp' (interpolation ratio) property on the DUC node via the call to the DUC block controller's `set_input_rate()` function. As the DUC node is no longer part of the graph, having been removed from it when the first streamer instance was destroyed, the graph property propagation algorithm doesn't 'see' the node with the dirty property, and the 'interp' property resolver callback is never invoked. As a result, the DUC's input rate property, which depends on the interpolation ratio value, is never updated, and thus calling the `get_tx_rate()` function to query the new rate of the TX chain results in an unexpected value. In fact, in this particular case, `set_tx_rate()` actually raises a warning that the TX rate couldn't be set, and a message is printed to the console. This commit remedies the situation by restoring the default resolve callback behavior for a node when it is removed from the graph. This allows the framework to be able to invoke the property resolver callback on that node when a property is updated, the expected behavior of a newly instantiated node.
* N310: Low band IF adjustmentsmichael-west2020-11-161-18/+10
| | | | | | | - Put ADF4351 at fixed integer-n mode IF freq - Set ADF4351 in low noise mode Signed-off-by: michael-west <michael.west@ettus.com>
* MPMD: Reduce max frame size for 10 GbEmichael-west2020-11-061-1/+1
| | | | | | | | | | | | MTU discovery is passing on sizes beyond the maximum size, which allows packets to exceed the default MTU size of 8000 set for 10 GbE. This can cause TX to stop when using higher sample rates. Reducing the maximum frame size to 7972 (8000 minus 28 bytes for UDP and IP headers) guarantees the packet size will never exceed the default MTU for 10 GbE. Signed-off-by: michael-west <michael.west@ettus.com>
* multi_usrp: Fix typos in streamer destruction callbackmichael-west2020-11-051-4/+4
| | | | Signed-off-by: michael-west <michael.west@ettus.com>
* sim: Integrate simulator into UHDSamuel O'Brien2020-10-285-3/+218
| | | | | | | | | This commit adds a device::register_device which allows uhd to start up a simulator when uhd is called with the arguments type=sim. Creating the device object creates a subprocess using pybind and an embedded interpreter, and destroying the object cleans up those subprocesses. Signed-off-by: Samuel O'Brien <sam.obrien@ni.com>
* DUC: Fix incorrect DDS_GAINmichael-west2020-10-261-1/+1
| | | | | | | Fixes incorrect value for the DDS_GAIN that was causing the TX output power to be 6 dB lower than it was supposed to be. Signed-off-by: michael-west <michael.west@ettus.com>
* multi_usrp: Fix streamer destruction callbackmichael-west2020-10-221-91/+74
| | | | | | | | | | | | | | | | | The streamers were keeping a reference to the multi_usrp object, so the object would not destruct when the user deleted or reset the shared pointer to the object. An error would occur if the user attempted to make the same device and get streamers on it without explicitly deleting the streamers first. This change refactors the code such that the streamer destructor only depends on the existence of a weak_ptr to the underlying rfnoc_graph and a vector of edges returned by the connect function. It checks to see if the graph has been deleted before calling the functions to disconnect the edges. This allows the multi_usrp object and streamer objects to be destructed in any order. Signed-off-by: michael-west <michael.west@ettus.com>
* graph: Serialize all graph-related functionsAaron Rossetto2020-10-222-8/+13
| | | | | | | | This commit expands the scope of the former _release_mutex, renaming it _graph_mutex and ensuring that all graph modification functions are serialized against each other. This ensures that callers to graph_t's public functions are always operating on a coherent view of the underlying BGL graph object.
* graph: Re-fetch dst_node descriptor after src_node potential removalAaron Rossetto2020-10-221-0/+3
| | | | | | | | | | | | | | | | | The graph_t::disconnect(src_node, dst_node) function removes connections (edges) from src_node to dst_node in the graph, and then removes the nodes (vertices) if their degree is zero after removing the connections. Because removing a vertex from the graph invalidates vertex descriptors, the graph_t::_remove_node() function resynchronizes the node-to-vertex descriptor map after removing the vertex. However, in graph_t::disconnect(), the vertex descriptor corresponding to dst_node was not being refetched after the potential removal of src_node, which results in the incorrect removal of innocent nodes under certain circumstances. This commit ensures that the node-to-vertex descriptor is reconsulted for the vertex descriptor corresponding to dst_node before removing it from the tree.
* fixup! rfnoc: Fix thread unsafe accesses in ctrlportCiro Nishiguchi2020-10-201-7/+5
|
* rfnoc: Fix thread unsafe accesses in ctrlportCiro Nishiguchi2020-10-201-56/+35
|
* python: Add access to the property_tree from PythonMartin Braun2020-10-163-0/+76
| | | | | | | Example: >>> usrp = uhd.usrp.multi_usrp("") >>> tree = usrp.get_tree() >>> print(tree.access_int("/name").get())
* python: Move multi_usrp_python to its own moduleMartin Braun2020-10-122-191/+200
| | | | | This helps with recompilation times of UHD. No functional changes.
* deps: rpclib: Fix issue on socket closingMartin Braun2020-10-091-1/+7
| | | | | | | The rpclib server session closes its socket, which can fail. In our case, we only use the server for some tests, and we close the server on process exit, so we let the error slide. Since we close servers in dtors, not doing so would occasionally cause SIGABRT.
* tests: mock_block: Allow mock blocks to carry MB controllersMartin Braun2020-10-091-5/+6
|
* n310/n300: Allow gain coercionMartin Braun2020-10-091-2/+14
| | | | | | | | | | | | The N310 had a different behaviour from other devices, where setting a gain out of range would cause an assertion error. This is problematic for two reasons: 1) Assertion errors should not be triggered by public APIs (if we throw public APIs, we should give a clear error message), and 2) Setting gain and frequency has a coercing behaviour on all other devices. This changeset clips the gain before calling into the gain table lookup.
* b200: handle overruns during continuous streamingmattprost2020-10-091-0/+3
| | | | | | | This allows the b200 devices to recover from overruns that occur during continuous streaming. Signed-off-by: mattprost <matt.prost@ni.com>
* ic_reg_map: Allow registers to be arraysMartin Braun2020-10-061-19/+114
| | | | | | | | | | This lets you declare registers like this: REG_NAME[ARRAY_LEN] ADDRESS[BITS] DEFAULT ENUMS The reg object will now carray REG_NAME as an array. So, you can do regs.REG_NAME[0] = VALUE;
* ic_reg_maps: Add common regmap template for PythonToni Jones2020-10-061-4/+88
| | | | | | | Add COMMON_PY_TMPL which is identical to COMMON_TMPL in functionality but generates Python syntax rather than C++ header syntax. Modify the generate function which will now determine if the destination regmap file is a Python file or not and will use the appropriate template.
* lib: disable non pcie types in find with resourceSteven Koo2020-10-058-8/+49
| | | | | | | mpmd find doesn't respect the "resource" arg hint and can be detected when "resource" is set. This results in incorrect device selection when using PCIe. This change adds detection for "resource" as a prefix in the device hints for mpmd and the other devices.
* uhd: clang format device implSteven Koo2020-10-055-18/+19
|
* uhd: replace default initializers with named onesSteven Koo2020-09-251-7/+8
| | | | This resolves an issue with building on older compilers.
* lib: graph_utils: Error on single SEP edgeSteven Koo2020-09-251-10/+14
| | | | | It could be possible that we only find one SEP connected edge, which should be invalid.
* lib: graph_utils: Fix formatting and compiler warningsMartin Braun2020-09-251-13/+15
| | | | | | | | | | | The conditional setting of some variables lead the compiler to assume they might be used uninitialized. Circumventing compiler warning by initializing variables to a default value, even if that's not the right value (they will get set later). Also applied clang-format to the same code section. This fixes da1aeaeccc.
* multi_usrp: Add get_mb_controller() API callCristina Fuentes2020-09-243-27/+39
|
* cal: sync log output between file system and resource dataLars Amsel2020-09-221-1/+3
| | | | | | To make the debug output of the database more readable the has_cal_data lookup for RC data prints the file that is looked up similar to the lookup for file system.
* E3xx: Add retry to loopback_self_testmichael-west2020-09-111-27/+46
| | | | | | | | | The loopback test sometimes fails. It was found that it would pass on a retry. The root cause of the failure is unknown at this time, but the retry allows the test to pass. This is intended as a temporary patch until the root cause of the failure can be identified. Signed-off-by: michael-west <michael.west@ettus.com>
* lib: Remove recursive locks in apply_correctionsmichael-west2020-09-041-3/+0
| | | | | | | | | There were locks in the apply_tx/rx_fe_corrections() methods that were acquired before calling methods that re-acquired the locks. The mutexes were not recursive, so it caused applications to lock up. The locks are unnecessary in the top level methods, so they are being removed. Signed-off-by: michael-west <michael.west@ettus.com>
* python: Add peek/poke bindings to noc_block_baseAaron Rossetto2020-09-031-0/+135
|
* rfnoc: replay: Update packet size on mtu updateSteven Koo2020-09-031-5/+4
| | | | | | | | | | | Replay block would previously fail output on low mtu links because it was creating packets based on the default contruction mtu of 8192. This change will update the packet size when mtu gets updated. This also removes a warning for large packet sizes because the replay block uses a maximum packet size property. The block should be free to coerce down based on mtu limitations. Signed-off-by: Steven Koo <steven.koo@ni.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 04:31:49 +0000