aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* Commented out warning if X300 reference clock fails to lock within 1 second ↵michael-west2014-07-221-2/+3
| | | | during initialization. Sometimes it takes longer and that is OK.
* Fix for BUG #517: B200: Regression of power level on RXmichael-west2014-07-221-1/+1
| | | | - Fixed scalar for RX DSP core
* Updated copyright year.michael-west2014-07-171-1/+1
|
* Fix for BUG #469michael-west2014-07-171-0/+2
| | | | - Added mutex for write_uart()
* - Changed variables from uint8_t to uint32_t so parsing of hex strings would ↵michael-west2014-07-171-3/+3
| | | | work properly.
* Addressing comments from review.michael-west2014-07-172-15/+21
| | | | | | - Corrected types of some variables to be boost types. - Removed debugging code accidentally left in. - Changed some compiled out error messages to log messages.
* Fix for BUG #469: Bad/Empty GPS NMEA strings returned when the queries are ↵michael-west2014-07-172-20/+108
| | | | | | | | | made in a random wait iterative fashion Fix for BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OK - Added checksum verification of NMEA strings - Improved handling of short or malformed strings - Fixed GPSDO data synchronization between X300 firmware and host
* Merge branch 'origin/b200/bug516' into maintBen Hilburn2014-07-171-4/+4
|\ | | | | | | Fixing B200 clock rate float compare.
| * BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-07-101-1/+1
| | | | | | | | - Addressed feedback from review.
| * Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-06-181-3/+3
| | | | | | | | - Corrected clock rate checks for B2x0
| * Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-06-181-3/+3
| | | | | | | | - Corrected clock rate checks for B2x0
* | Merge branch 'origin/ashish/rx_pcie_overflows' into maintBen Hilburn2014-07-172-3/+7
|\ \
| * | x300: Bugfix for overflows on PCIe at 200MS/sAshish Chaudhari2014-06-272-3/+7
| |/
* | Merge branch 'origin/b200/bug512' into maintBen Hilburn2014-07-171-9/+15
|\ \ | | | | | | | | | B200 now creates internal PPS. Depends on FPGA change.
| * | Enhancement #512: B210: Need an Internal PPSmichael-west2014-06-131-9/+15
| | | | | | | | | | | | - Added support for internal PPS selection (set as default)
* | | Fix for BUG #527: N200: 50 Msps results in two tonesmichael-west2014-07-011-1/+2
| |/ |/| | | | | - Adjusted check to enable first half-band filter only if the rate is decimated enough between the CIC and other half-band filter
* | Merge branch 'origin/b200/bug500' into maint - Fixing B200 phase alignment issueBen Hilburn2014-06-163-3/+9
|\ \
| * | - Changed XOR to OR for REG_DSP_RX_MUX flags.michael-west2014-06-121-3/+3
| | |
| * | Fix for BUG #500: B210: RX channels are not phase alignedmichael-west2014-06-063-3/+9
| | | | | | | | | | | | - Adding UHD side code to invert second RX channel
* | | Fix issue with "item32" registered size, Bug 466.Ben Hilburn2014-06-131-0/+3
|\ \ \ | |_|/ |/| |
| * | UHD: Addressing Bug 466, as per Balint.Ben Hilburn2014-05-221-0/+3
| | |
* | | Do not set the mfloat-soft flag during the test for arm_neon.h.Philip Balister2014-06-031-7/+0
|/ / | | | | | | | | | | | | Use the flags passed in from the toolchain. If this test runs on a hard-float system, bad things happen. Signed-off-by: Philip Balister <philip@opensdr.com>
* / Lots of bit-specific type work to fix compilation on older OSes.Ben Hilburn2014-05-214-15/+15
|/
* x300: adding include to fix builds on older systemsBen Hilburn2014-05-201-0/+1
|
* Fixing Bug #473 - Autoselection of VCO Frequency in DBSRX2Ben Hilburn2014-05-201-6/+8
|\
| * Fixed whitespace and added comment.michael-west2014-05-201-5/+6
| |
| * Fix for BUG 473: UHD: DBSRX2 VCO Autoselect Failing / Wrong Frequency Rangemichael-west2014-05-131-3/+4
| | | | | | | | | | - Corrected frequency range for DBSRX2 - Corrected register write order when changing frequency
* | x300: Fixing Bug 456 - backwards LED colors.Ben Hilburn2014-05-201-2/+2
|\ \
| * | Fix for BUG 456: LED TX/RX colors backwards on X300michael-west2014-05-161-2/+2
| |/ | | | | | | - Corrected bit masks so TX will light the red LED and RX will light the green LED
* | BUG #465: UHD: "Error: Connection refused" for USRP1 and B100michael-west2014-05-141-0/+5
| | | | | | | | - Added catch for unhandled error
* | log: replaced usage of deprecated boost::filesystem functionNicholas Corgan2014-05-121-3/+3
|/
* Merge branch 'origin/martin/multi_usrp/bug_dc_offset' into maintBen Hilburn2014-05-081-5/+25
|\
| * multi_usrp: Throws warnings for some tree propsMartin Braun2014-05-051-5/+25
| | | | | | | | | | | | | | Until now, multi would simply access some property and assume it exists. A call for set_tx_dc_offset() on a B210 would thus throw errors. This checks for B-series-only leaf nodes before doing anything and displays a warning instead.
* | BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OKmichael-west2014-05-061-1/+8
| | | | | | | | | | | | - It was found that strings containing only a newline character were being returned by N-series and X-series devices. - Added better handling of strings received under 6 bytes. - Added erasing of end of line characters.
* | usrp2: fixed usrp2_card_burner.py and usrp_n2xx_simple_net_burner paths in ↵Nicholas Corgan2014-05-062-4/+17
|/ | | | incompatibility error messages
* x300: Bumped FPGA compat number to 6.Ashish Chaudhari2014-04-281-1/+1
|
* x300: Fixed DMA busy logic after review feedback.Ashish Chaudhari2014-04-282-2/+2
|
* x300: Changed bus_clk frequency to 166.67MHz.Ashish Chaudhari2014-04-281-1/+1
|
* x300: Bumped FPGA compat number to 5.Ashish Chaudhari2014-04-251-1/+1
|
* x300: Addressed review feedbackAshish Chaudhari2014-04-252-12/+13
| | | | | - Fixed synchronization for unclaim - Removed stray RIO addr space set
* x300: Added synchronization between device claiming and checking.Ashish Chaudhari2014-04-242-5/+40
| | | | | - We now maintain a registry of pcie ZPU transports - Added static mutex for claimer
* x300: Cleanup for PCIe flushingAshish Chaudhari2014-04-242-38/+44
|
* x300: Added hardware flush mechanism to PCIe logic.Ashish Chaudhari2014-04-244-12/+124
| | | | | - Added DMA enabled states to DMA logic to allow for hardware data flushing during init. - niusrprio_session will now check for FPGA busy before downloading
* Merge branch 'origin/uhd/issue_448_itemsize' into maintBen Hilburn2014-04-211-1/+1
|\
| * multi_usrp: Fixed bug which caused unspecified OTW-format to crash appsMartin Braun2014-04-151-1/+1
| |
* | x300: removing intelligent PPS detection until further developmentBen Hilburn2014-04-151-1/+2
|/
* Merge branch 'origin/ncorgan/tvrx2_fix'Ben Hilburn2014-04-101-3/+3
|\ | | | | | | Fix bug with regard to TVRX2 refclock dividers.
| * tvrx2: fix ref_clock logic when using N2x0Nicholas Corgan2014-04-091-3/+3
| |
* | Merge branch 'origin/b200/issue_418'Ben Hilburn2014-04-103-11/+14
|\ \ | | | | | | | | | Fixing unsafe sscanf call.
| * | b100+b200+usrp1: removed potentially unsafe sscanf callMartin Braun2014-04-103-11/+14
| |/
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:51:21 +0000