summaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* usrp1: toggle the FPGA reset and RX reset registers at initJosh Blum2011-05-011-8/+18
|
* usrp-e100: shrink name field to git mcr into eepromJosh Blum2011-04-201-2/+3
|
* USRP1: added support for setting clock rate from EEPROMJosh Blum2011-05-014-8/+56
| | | | | Basically, same deal as the previous changeset but for USRP1. Modified previous changes so that the key is shorter (mcr = master_clock_rate)
* usrp-e100: add ability to set/get default master clock rate from EEPROMJosh Blum2011-05-013-1/+47
| | | | | | | | | Mboard eeprom map class can parse the setting (4 byte float). The clock control will try to set the eeprom rate if present, otherwise or under failure condition, it sets the default. Updated docs, example, and provided helpful verbose. I would prefer that users burn the desired rate to the eeprom (and they may too).
* uhd: fixed typo in tune request/result inter_freq -> rf_freqJosh Blum2011-05-012-22/+22
| | | | | | | | For some reason, the code said intermediate frequency, however, it was used and treated as RF frequency. It was always intended to be the RF frequency, but was misnamed due to a cognitive distortion.
* usrp2: use default mtu as upper limit unless user specifiesJosh Blum2011-04-301-11/+12
|
* usrp2: allow devices to be discovered when usrp2_iface::make throwsJosh Blum2011-04-291-12/+16
| | | | | | | | If the discovery throws an exception, we can still yeild a discovered device. The error (which is a problem) will re-appear at make/factory time. The side effect is that a device w/ error will be discovered w/ empty serial and names. We protect against this by supporing older firmwares where i2c proto is compatible.
* usrp2: added support for GPSDO configuration bits in EEPROMJosh Blum2011-04-292-5/+38
| | | | | | | Added instructions to install and burn eeprom to documentation. Made gps_ctrl and gps_time sensor optional. Added sensors for motherboard to documentation
* GPS parser fixes for get_time.Nick Foster2011-04-292-7/+5
|
* USRP2: enable GPS by defaultNick Foster2011-04-291-3/+3
|
* USRP2: Added GPS time support to the sensors interface. gps_time sensor ↵Nick Foster2011-04-292-1/+9
| | | | returns epoch time as time_t. Untested.
* N210: implemented mboard sensors for ref lock and MIMO lockNick Foster2011-04-294-1/+28
|
* dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better errorJosh Blum2011-04-281-1/+5
|
* usrp_e100: added recv/send_frame_size xport argsJosh Blum2011-04-163-11/+23
|
* rfx: reverted change, now prefer R divider to clock dividerJosh Blum2011-04-161-22/+17
| | | | | | There seems to be some issue using lower clock rates, at least on E100, I am reverting this now until I can figure out why it happens, or until I can find a more stable way to offer this feature.
* usrp1: fix for tx under remainder conditionsJosh Blum2011-04-271-3/+3
| | | | | The remainder was accidentally lost because the offset to the buffer was not propagated outside of the commit function.
* usrp1: the rx mux was reversed (fixed multi-channel rx)Josh Blum2011-04-271-1/+1
|
* Merge branch 'gdb_support'Josh Blum2011-04-2612-278/+592
|\ | | | | | | | | Conflicts: host/lib/usrp/dboard/CMakeLists.txt
| * Enhance WBX IQ balance performance through LO driveJosh Blum2011-04-261-0/+29
| |
| * wbx: split wbx into daughterboard and granddaughterboard implementationJosh Blum2011-04-264-196/+398
| |
| * usrp: support for grand daughter board eepromJosh Blum2011-04-266-6/+41
| |
| * usrp: work on dboard_manager to register an ID for multiple xcvr combinationsJosh Blum2011-04-261-75/+123
| |
* | Merge branch 'sbx-adi'Josh Blum2011-04-262-0/+794
|\ \
| * | Handle antenna switching and LEDsJason Abele2011-04-231-36/+120
| | |
| * | SBX enable LO LPF at 1.5GHzJason Abele2011-04-231-12/+31
| | |
| * | Makes 2nd SBX proto workJason Abele2011-04-231-32/+47
| | |
| * | Updating SBX to latest UHDJason Abele2011-04-231-15/+47
| | |
| * | Capture characterization changesJason Abele2011-04-231-6/+6
| | |
| * | Initial SBX-ADI driverJason Abele2011-04-232-0/+644
| | |
* | | xcvr2450: initialize the max_power variableJosh Blum2011-04-261-1/+1
| |/ |/|
* | uhd: added scoped lock to device find and make (for thread safety)Josh Blum2011-04-261-0/+7
|/
* uhd: move thread loop condition flag to before barrier (prevents race condition)Josh Blum2011-04-223-3/+3
|
* uhd: removed constants.hpp.in, replaced w/ per source compile definesJosh Blum2011-04-195-44/+20
|
* uhd: use UHD_PKG_DATA_PATH environment variable to override the one in constantsJosh Blum2011-04-191-16/+11
| | | | The installer sets UHD_PKG_DATA_PATH, we can can handle transplanted builds.
* Merge branch 'usrp2/discover_with_old_fw'Josh Blum2011-04-193-38/+81
|\
| * usrp2: improve the compatibility error messagesJosh Blum2011-04-192-8/+7
| |
| * usrp2: use the firmware's discovered compat numberJosh Blum2011-04-131-4/+16
| |
| * usrp2: add check for holler protocol, we can support backwardsJosh Blum2011-04-132-15/+29
| |
| * usrp2: support fw protos with older compats for various partsJosh Blum2011-04-082-20/+38
| | | | | | | | | | | | | | | | | | | | i2c, spi, and uart are long time no changing registers changed recently (think re-map) also, perform the fpga compat check in the make now we can find devices with out of date images
* | rfx: changes to pick from the dboard clock rates and use R=1Josh Blum2011-04-181-17/+22
| |
* | Updated documentation and improved XCVR RSSI calculationJason Abele2011-04-141-2/+11
| | | | | | | | | | | | | | | | | | | | Documented dboard sensors Documented DBSRX2 Added description of direct conversion vs low IF for each dboard Added E1xx docs for adding refclock and pps connectors XCVR rssi calculation was in unscaled dB units Used chart in datasheet (pg 16) to rescale to dBm
* | uhd: specify the UHD_PKG_DATA_PATH once (since images shipped w/ drivers)Josh Blum2011-04-143-21/+6
| |
* | Merge branch 'thread_prio_warning'Josh Blum2011-04-131-5/+4
|\ \
| * | uhd: attempt to cleanup language in thread prio warningJosh Blum2011-04-091-5/+4
| |/
* / usrp-e100: reset dboard clocks on rate change, and dont cache in dboard ifaceJosh Blum2011-04-073-4/+32
|/
* Merge branch 'mingw_cygwin'Josh Blum2011-04-072-0/+11
|\
| * uhd: always link winsock2 on windows, disable pthread SCHED_RR for cygwinJosh Blum2011-04-062-1/+8
| |
| * uhd: tweaks for cygwin/mingw, always link winsock2, findusb1, __USE_W32_SOCKETSJosh Blum2011-04-052-8/+4
| |
| * uhd: a few minor changes to get uhd building under mingw or cygwinJosh Blum2011-04-041-0/+8
| |
* | usb: mark libusb callbacks with LIBUSB_CALL to ensure correct calling conventionJosh Blum2011-04-051-2/+12
|/
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:39:12 +0000