summaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Expand)AuthorAgeFilesLines
* basic/lf: keep dboard clocks disabled (should be by default)Josh Blum2011-10-271-2/+2
* uhd: change how we configure version.cppJosh Blum2011-10-252-7/+6
* usb: improve messages/logging for when the usb open failsJosh Blum2011-10-241-1/+15
* b100: perform test claim on usb before continuingJosh Blum2011-10-241-14/+7
* b100/e100: additional constraints for clock rate configurationJosh Blum2011-10-182-0/+6
* Default adf4350 PLL to fast-lock mode.Ben Hilburn2011-10-121-1/+1
* Fix for unitialized eepromJason Abele2011-10-121-1/+3
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-122-28/+69
* b100: add reference lock sensorJosh Blum2011-10-104-2/+19
* usrp: added product and revision fields to eepromJosh Blum2011-10-102-36/+80
* usrp: added revision field to the dboard id classJosh Blum2011-10-101-2/+19
* B100/USRP1: pass in VID/PID from args string so you can specify where to look...Nick Foster2011-10-102-4/+20
* Bumping the B100 PID to 0x0002, at Josh's direction.Ben Hilburn2011-10-101-1/+1
* e100: codec control register fix for txJosh Blum2011-10-061-1/+1
* gen2: fixed rate calculation when > 128Josh Blum2011-10-042-2/+6
* usrp2: give users a warning for gpsdo support + fw updateJosh Blum2011-09-281-0/+7
* usrp2: remove old pre-release warningJosh Blum2011-09-281-10/+0
* usrp2: allow backwards compat with previous fwJosh Blum2011-09-281-1/+1
* e100: tweak for codec params for slight improvementJosh Blum2011-09-281-4/+12
* e100: gps talking -> termios magic fooJosh Blum2011-09-281-9/+7
* e100: gps uart deal with cr and nlJosh Blum2011-09-282-10/+5
* e100: added support for internal gpsdoJosh Blum2011-09-284-0/+107
* gps: use absolute timeout for communicationJosh Blum2011-09-281-6/+6
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-287-93/+78
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-281-0/+1
* e100: added ref locked sensor for clock referenceJosh Blum2011-09-284-2/+22
* e100: added support for r4 differential clockingJosh Blum2011-09-283-13/+36
* B100: unshadow dboard clock rates so you can set master freq after init and s...Nick Foster2011-09-233-7/+21
* Make unknown db complain usefully about antenna selectionJason Abele2011-09-211-4/+4
* usrp: super packet handler release in orderJosh Blum2011-09-211-0/+7
* B100: LVDS clocking on db outputsNick Foster2011-09-201-8/+4
* usrp1: disable pad to one for usrp1 (not needed)Josh Blum2011-09-192-0/+4
* b100: order of deconstruction, kill marauder firstJosh Blum2011-09-191-0/+5
* usb: added interface args to usb abstractionsJosh Blum2011-09-195-26/+29
* uhd: separate_device_addr, copy globals across entire addressJosh Blum2011-09-151-2/+14
* usrp: also use the new API to get the property tree in multi-usrpJosh Blum2011-09-141-1/+1
* usrp: fix string mapping for PPS_NEG clock configJosh Blum2011-09-141-1/+1
* usrp: remove wax::obj entry point (not used)Josh Blum2011-09-084-12/+0
* usrp: fix check for max stream_cmd.num_samps, upper 4 bits reservedJosh Blum2011-09-081-1/+1
* USRP2: don't populate GPS sensors if no GPSDO found. Fixes bug #614.Nick Foster2011-09-081-4/+6
* wbx: fix bug in wbxv3 tx gain readback calculationJosh Blum2011-09-081-1/+1
* udp: added check_registry_for_fast_send_threshold to non-wsa transportJosh Blum2011-09-081-0/+30
* e100: fix FPGA filename lookup, and use model string for nameJosh Blum2011-09-031-2/+2
* usb: reimplement ~libusb_zero_copy_impl to avoid segfaults and indefinite tim...Josh Blum2011-09-021-13/+13
* usrp1: reset control objects in this order to avoid race conditionsJosh Blum2011-09-021-1/+3
* usb: removed handler thread, do work in get buffer callsJosh Blum2011-09-021-85/+75
* e100: use model string to determine FPGA image to support E110Josh Blum2011-09-012-4/+14
* xcvr2450: fix the locking at marginal frequenciesJosh Blum2011-09-011-0/+11
* uhd: fill in other fields of pkg-config fileJosh Blum2011-09-011-8/+8
* uhd: removed WSA UDP transport implementationJosh Blum2011-09-012-311/+1