summaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Expand)AuthorAgeFilesLines
* usrp1: apply conditional disables/enables to rx and txJosh Blum2011-05-147-9/+60
* Merge branch 'tvrx2'Josh Blum2011-05-134-0/+2438
|\
| * Added TVRX2 supportJason Abele2011-05-134-0/+2438
* | uhd: init log file lock ptr to nullJosh Blum2011-05-131-0/+4
* | uhd: work on logging and message facility initializationJosh Blum2011-05-132-67/+77
* | usrp-e100: use misc test32 register to store fpga hashJosh Blum2011-05-101-36/+34
|/
* usrp-e100: created device address arg for master clock rate, removed eeprom hackJosh Blum2011-05-125-53/+13
* usrp-e100: added soft sync for ad9522 clock controlJosh Blum2011-05-091-2/+12
* usrp_e100: work w/ ad9522 clock configurationJosh Blum2011-05-081-2/+18
* Make log locking work with picky boostJason Abele2011-05-051-4/+5
* usrp1: overload read_eeprom to handle multi-byte readsJosh Blum2011-05-052-1/+11
* usrp1: added more logging to usrp1 iface for debuggingJosh Blum2011-05-051-0/+20
* uhd: various tweaks to log and msg, replaced a few remaining stdioJosh Blum2011-05-047-9/+21
* uhd: removed more iostream stuff from usrp* implementationsJosh Blum2011-05-0418-110/+108
* usrp-e100: removed stdio prints from implementationJosh Blum2011-05-048-82/+88
* uhd: replaced warning post with calls to UHD_MSG(warning)Josh Blum2011-05-0421-104/+179
* uhd: added interprocess file lock to the logger fileJosh Blum2011-05-041-3/+30
* uhd: replaced many conditional prints with UHD_LOG usageJosh Blum2011-05-047-31/+26
* uhd: tweaks for logger file entriesJosh Blum2011-05-041-6/+21
* usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often)Josh Blum2011-05-049-89/+68
* uhd: moved the logger into the utils subdirJosh Blum2011-05-043-2/+2
* uhd: added configurable default log level and thread safetyJosh Blum2011-05-041-7/+51
* uhd: work on the backend for a logging facilityJosh Blum2011-05-042-0/+134
* usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock configJosh Blum2011-05-031-15/+23
* Added RSSI sensor for RFX series (not rfx400)Jason Abele2011-05-021-6/+29
* usrp1: toggle the FPGA reset and RX reset registers at initJosh Blum2011-05-011-8/+18
* usrp-e100: shrink name field to git mcr into eepromJosh Blum2011-04-201-2/+3
* USRP1: added support for setting clock rate from EEPROMJosh Blum2011-05-014-8/+56
* usrp-e100: add ability to set/get default master clock rate from EEPROMJosh Blum2011-05-013-1/+47
* uhd: fixed typo in tune request/result inter_freq -> rf_freqJosh Blum2011-05-012-22/+22
* usrp2: use default mtu as upper limit unless user specifiesJosh Blum2011-04-301-11/+12
* usrp2: allow devices to be discovered when usrp2_iface::make throwsJosh Blum2011-04-291-12/+16
* usrp2: added support for GPSDO configuration bits in EEPROMJosh Blum2011-04-292-5/+38
* GPS parser fixes for get_time.Nick Foster2011-04-292-7/+5
* USRP2: enable GPS by defaultNick Foster2011-04-291-3/+3
* USRP2: Added GPS time support to the sensors interface. gps_time sensor retur...Nick Foster2011-04-292-1/+9
* N210: implemented mboard sensors for ref lock and MIMO lockNick Foster2011-04-294-1/+28
* dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better errorJosh Blum2011-04-281-1/+5
* usrp_e100: added recv/send_frame_size xport argsJosh Blum2011-04-163-11/+23
* rfx: reverted change, now prefer R divider to clock dividerJosh Blum2011-04-161-22/+17
* usrp1: fix for tx under remainder conditionsJosh Blum2011-04-271-3/+3
* usrp1: the rx mux was reversed (fixed multi-channel rx)Josh Blum2011-04-271-1/+1
* Merge branch 'gdb_support'Josh Blum2011-04-2612-278/+592
|\
| * Enhance WBX IQ balance performance through LO driveJosh Blum2011-04-261-0/+29
| * wbx: split wbx into daughterboard and granddaughterboard implementationJosh Blum2011-04-264-196/+398
| * usrp: support for grand daughter board eepromJosh Blum2011-04-266-6/+41
| * usrp: work on dboard_manager to register an ID for multiple xcvr combinationsJosh Blum2011-04-261-75/+123
* | Merge branch 'sbx-adi'Josh Blum2011-04-262-0/+794
|\ \
| * | Handle antenna switching and LEDsJason Abele2011-04-231-36/+120
| * | SBX enable LO LPF at 1.5GHzJason Abele2011-04-231-12/+31
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 16:34:57 +0000