summaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* usrp1: Wait for USB device renumeration only when necessaryThomas Tsou2010-08-272-3/+4
| | | | | | Waiting for FX2 renumeration is only needed after a firmware load so move it out of the main device discovery loop and into the firmware load itself.
* usrp1: Handle degenerate managed send buffer casesThomas Tsou2010-08-271-4/+19
| | | | | | | | Handle degenerate usage of send buffer commits. If the buffer is destroyed without ever being submitted, submit a zero byte transfer to return control to the underlying structure. If a committed buffer is re-committed, then report an error message and return 0 bytes back.
* usrp1: Disable default debug output for libusb implementationsThomas Tsou2010-08-273-3/+3
|
* usrp1: Cleanup libusb device handlingThomas Tsou2010-08-273-33/+50
| | | | | | | | This patch limits all libusb device enumeration operations to FSF (Vendor ID = 0xfffe) devices, which removes a lot of unncessary libusb output when debug mode is enabled. The reference counts held by the libusb device list are also reduced, which prevents holding references to unused devices.
* usrp1: Disable i2c error messages unless debug is enabledThomas Tsou2010-08-271-2/+4
| | | | | | Failed i2c operations can be normal under certain situations. Notably, write failures are used to detect unpopulated daughterboard slots.
* usrp1: Disable default codec debug outputThomas Tsou2010-08-271-1/+1
|
* Merge branch 'usrp1_cleanup' into usrp1Thomas Tsou2010-08-274-65/+53
|\
| * usrp1: Add missing include for fpga registersThomas Tsou2010-08-271-0/+1
| |
| * usrp1: Only return a list of FSF devicesThomas Tsou2010-08-271-1/+12
| |
| * usrp1: Fix DDC rate storage value and comments for multiple channel supportThomas Tsou2010-08-271-4/+14
| |
| * usrp1: Clean up initialization sequence of fpga registersThomas Tsou2010-08-271-59/+18
| |
| * usrp1: Fix fpga load issue by increasing delay after firmware loadThomas Tsou2010-08-271-1/+1
| | | | | | | | 500ms is not enough. 1-2 seconds is suitable.
| * usrp1: Add TODO commentsThomas Tsou2010-08-271-1/+8
| |
* | usrp1: handle special dbsrx clocking caseJosh Blum2010-08-265-130/+55
|/
* usrp1: cast enum to char before printing as %cJosh Blum2010-08-262-4/+4
|
* usrp1: swapped the mux values to account for the convert types routinesJosh Blum2010-08-261-17/+46
|
* usrp1: codec pga gain control fixJosh Blum2010-08-261-14/+14
|
* Merge branch 'next' into usrp1Josh Blum2010-08-264-79/+41
|\
| * basic-tx: mirror the rx subdevices for basic tx boards as wellJosh Blum2010-08-261-14/+18
| |
| * Merge branch 'mux'Josh Blum2010-08-263-65/+23
| |\
| | * Merge branch 'convert_types' into muxJosh Blum2010-08-251-26/+115
| | |\
| | * | usrp2: changes to mux calculation routine and usrp2 fpga compat numberJosh Blum2010-08-253-65/+23
| | | |
* | | | usrp1: Fill in missing dboard interface with an empty callThomas Tsou2010-08-261-0/+6
| | | |
* | | | Merge branch 'convert_types' into usrp1Thomas Tsou2010-08-264-11/+120
|\| | |
| * | | uhd: switched the IQ order interpretation for convert typesJosh Blum2010-08-251-37/+29
| | |/ | |/|
| * | uhd: convert types corrected for little endian, created SSE2 float/short ↵Josh Blum2010-08-241-26/+115
| |/ | | | | | | conversion for no-swap case
| * usrp: added get dboard iface to simple wrapper, and set gpio debug to dboard ↵Josh Blum2010-08-232-0/+28
| | | | | | | | iface
| * basic: better errors for invalid antenna selectionJosh Blum2010-08-231-4/+4
| |
* | Merge branch 'usrp1_next' into usrp1Thomas Tsou2010-08-2615-566/+655
|\ \
| * | usrp1: Modifiy USB transport implementations to use new interfaceThomas Tsou2010-08-267-314/+322
| | | | | | | | | | | | Common libusb1 code is consolidated in the libusb base file.
| * | usrp1: Remove unused overrun/underrun poll variableThomas Tsou2010-08-241-2/+0
| | | | | | | | | | | | | | | | | | The polling inverval for overrun and underrun checking is rate dependent and calculated in the dsp code whenever the interpolation or decimation is changed.
| * | usrp1: Cleanup unnecessary state variablesThomas Tsou2010-08-241-12/+22
| | |
| * | usrp1: Improve debug output readabilityThomas Tsou2010-08-241-1/+2
| | |
| * | usrp1: Fix assertion that prevents 32-bit SPI transactionsThomas Tsou2010-08-231-1/+1
| | |
| * | usrp1: Remove hard coded value in clock rate propertyThomas Tsou2010-08-231-1/+1
| | |
| * | usrp1: Refactor I/O implementationThomas Tsou2010-08-233-130/+215
| | |
| * | usrp1: Fix bug in calculating transmit muxThomas Tsou2010-08-231-1/+1
| | | | | | | | | | | | Use transmit instead of receive properties.
| * | usrp1: Change codec transmit gain scalingThomas Tsou2010-08-191-2/+2
| | | | | | | | | | | | | | | | | | The AD9862 datasheet states that maximum gain is achieved with a value of 111111 (0x3f), however, empirical testing reveals that the gain scaling value spans the full register width of 8-bits.
| * | usrp1: Make underrun/overrun checking rate dependentThomas Tsou2010-08-191-10/+22
| | | | | | | | | | | | Calculate a polling interval based on the sample rate and size.
| * | usrp1: Remove codec gain TODO commentsThomas Tsou2010-08-191-3/+3
| | |
| * | usrp1: Return proper mboard proxyThomas Tsou2010-08-181-2/+2
| | |
| * | usrp1: Refactor mboard tuning codeThomas Tsou2010-08-184-114/+92
| | |
| * | usrp1: Return unknown (0xff) on invalid I2C readThomas Tsou2010-08-171-5/+2
| | | | | | | | | | | | | | | This allows a dboard eeprom read to continue when reading from an empty slot.
* | | usrp1: images for usrp1, makefile checks for image generation dependenciesJosh Blum2010-08-192-17/+23
| | |
* | | Merge branch 'master' into usrp1Josh Blum2010-08-196-45/+82
|\ \ \ | | |/ | |/|
| * | uhd: added image utils code to search the images paths for image filesJosh Blum2010-08-193-14/+41
| | |
| * | usrp: rethrow validate subdev spec errors with additional infoJosh Blum2010-08-181-29/+36
| | |
| * | usrp2: template pick rate to avoid compile errorsJosh Blum2010-08-181-2/+3
| | |
| * | uhd: windows path escape fixJosh Blum2010-08-181-0/+2
| | |
* | | Merge branch 'master' into usrp1Josh Blum2010-08-172-5/+5
|\| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 22:41:51 +0000