aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Expand)AuthorAgeFilesLines
* x300: Enable clock_source and time_source device argsMartin Braun2018-08-101-2/+2
* x300: Use constrained_argsMartin Braun2018-08-104-48/+222
* lib: Improve constrained_device_args_tMartin Braun2018-08-101-2/+14
* x300: Move defaults to their own headerMartin Braun2018-08-103-116/+159
* e320: Fix tx/rx atr - antenna and frequency settingsSugandha Gupta2018-08-095-30/+32
* fixup! mpm: mg: add set_master_clock_rate memberMartin Braun2018-08-031-2/+2
* rfnoc: dma_fifo: Added a more robust flush mechanismAshish Chaudhari2018-08-032-36/+60
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
* mpmd: Allow setting time_source and clock_source propsMartin Braun2018-08-021-24/+4
* x300: Log git hash and compat number as debug messageMartin Braun2018-08-011-3/+8
* b100: Demote some clocking-related log messages to traceMartin Braun2018-07-311-2/+2
* b100: Remove all Boostisms from fifo_ctrl_excelsiorMartin Braun2018-07-311-9/+9
* b100: Fix fifo_ctrl_excelsior not exitingMartin Braun2018-07-311-13/+2
* b100: Move fifo_ctrl_excelsior to b100 subdirMartin Braun2018-07-315-2/+2
* lmx2592: fix calibration start during tuningMark Meserve2018-07-311-1/+3
* lmx2592: always mux lock detect after initMark Meserve2018-07-311-9/+5
* lib: device: Parallelize device discoveryMartin Braun2018-07-311-11/+19
* mpmd: Parallelize broadcast-findingMartin Braun2018-07-311-2/+11
* X300: Change Ethernet bufferingMichael West2018-07-2512-328/+339
* Device3: Constrain send_buff_sizeMichael West2018-07-251-6/+12
* rx_streamer: Release buffers no longer neededMichael West2018-07-251-9/+26
* X300: Reduce Ethernet frame size to 4000michael-west2018-07-252-6/+5
* Device3: Change packet-based flow control to byte-based flow controlMartin Braun2018-07-2515-443/+629
* rfnoc: Enabled SW flush mechanism impl'd in noc_shellAshish Chaudhari2018-07-242-4/+88
* rfnoc: legacy_compat: Remove superfluous variableMartin Braun2018-07-231-1/+0
* C API: Fix incorrectly declared lockMartin Braun2018-07-231-1/+1
* n230: Fix incorrectly declared locksMartin Braun2018-07-231-3/+5
* x300: Fix incorrectly declared locksMartin Braun2018-07-232-5/+5
* mpmd: Add set_timeout_init() API call to mpmd_mboard_implMartin Braun2018-07-182-2/+11
* fixup! uhd: Warn when tuning with auto DSP frequency and an external LOBrent Stapleton2018-07-181-1/+3
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-1815-12/+1875
* mpm: initial commit of E320 codeBrent Stapleton2018-07-182-0/+21
* multi_usrp: Fix get_usrp_tx_info() for MPMD devicesMartin Braun2018-07-171-1/+1
* UBX: Add support for phase synchronization at LTE clock ratesMichael West2018-07-173-13/+46
* X300: Change default dboard_clock_rate depending on master_clock_rateMichael West2018-07-172-3/+3
* X300: Add support for 11.52 MHz and 23.04 MHz referencesMichael West2018-07-171-12/+82
* fixup! lib: Purge some use of boost::system_timeMartin Braun2018-07-171-1/+0
* B200: Fix SC8 RX StreamingVidush2018-07-161-9/+18
* mg: fix tx power issueTrung Tran2018-07-144-27/+4
* fixup! B200: Check if recv_frame_size is larger than minimum valuemichael-west2018-07-132-12/+20
* b200: Update FW and FPGA imagesMartin Braun2018-07-121-2/+2
* B200: Check if recv_frame_size is larger than minimum valueVidush2018-07-122-0/+10
* B200: Change Recv Frame Size to 8176Vidush2018-07-122-2/+20
* lib: Purge some use of boost::system_timeMartin Braun2018-07-125-21/+32
* uhd: Expose DC Offset range via multi_usrp interfaceDerek Kozel2018-07-114-0/+45
* uhd: Warn when tuning with auto DSP frequency and an external LODerek Kozel2018-07-101-0/+19
* legacy_compat: Fix tx/rx channel map initialization for all channelsSugandha Gupta2018-07-091-5/+14
* e300: remove time spiTrung N Tran2018-07-061-36/+1
* fixup! e300: merge files from rfnoc-develMartin Braun2018-07-062-0/+8
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 02:15:56 +0000