aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* TwinRX: Enable phase resync on ADF535xmichael-west2018-12-101-17/+9
|
* TwinRX: Tuning improvementsmichael-west2018-12-103-17/+20
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* uhd: Fix log statement for Port number on RFNOC blockSugandha Gupta2018-12-051-1/+1
| | | | | CE is display in decimal format and Port number will be displayed in Hex, as it represents Block Port on the crossbar
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* python: Add sync source to Python APIBrent Stapleton2018-11-291-0/+32
| | | | Exposing getters, setters, and options for multi_usrp sync source.
* e300: Type-cast fix for boostAndreas Müller2018-11-281-1/+1
| | | | | | | Fixes compiler errors on newer Boost. boost::posix_time::microseconds() requires a int64_t. Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
* rfnoc: Add halt to replay APIWade Fife2018-11-271-0/+4
| | | | | The HALT feature allows a command that takes a long time to run to be stopped while it is in progress.
* rfnoc: Fix default SPP for replayWade Fife2018-11-271-4/+3
| | | | Consolidate two constants for default replay packet size down to one.
* x3xx: implement rfnoc get antenna functionsMark Meserve2018-11-262-0/+16
|
* x300: fixup minimum master clock rateBrent Stapleton2018-11-211-1/+1
| | | | | Recent clocking changes set the minimum master clock rate to 187.5MHz, instead of the actual 184.32MHz. This change corrects that.
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* mpmd: add fpga_vesion_hash infoTrung Tran2018-11-161-0/+2
|
* mpmd: Improve error message for compat number mismatchesMartin Braun2018-11-161-6/+14
|
* x300: New mode to configure master clock rateScott Torborg2018-11-163-10/+104
| | | | | | | | Add a new clocking mode to automatically configure arbitrary master clock rates. Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com>
* python: populated the tune_result_t bindingKevin Rigney2018-11-151-0/+6
| | | | | | The Python API bindings for the tune_result_t structure was not complete. This caused problems when trying to use it, as when tuning the TwinRX daughtercard.
* python: adding device_addr_t to Python APIBrent Stapleton2018-11-141-0/+32
| | | | | | | Add support for device_addr_t to the Python API. Most functions are exposed normally. The main exception is the constructor from a map of strings, which is replaced by a factory function called `make_device_addr`.
* python: tighten the scope of releasing the GILBrent Stapleton2018-11-141-20/+22
| | | | | Only release the GIL for the calls to send() and recv(), instead of the entire wrapper functions.
* python: expose streamer timeoutsBrent Stapleton2018-11-141-16/+27
| | | | | | Expose optional timeouts on send, recv, and recv_async_msg. These timeouts do not apply to the setup in the wrapper functions, only the calls to the streamer functions.
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* uhd: Add device arg to enable dual ethernet for txCiro Nishiguchi2018-11-142-2/+17
| | | | | | | | UHD currently only uses a single ethernet link for tx data, even if the device is initialized with dual 10GbE links. Using both links when a DMA FIFO is present causes sequence errors due to DMA FIFO bandwidth limitations. This maintains the current default behavior but allows users to override it through a device arg "enable_tx_dual_eth".
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-1433-380/+380
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* mpmd: increase rpc timeout during reading mb sensorTrung Tran2018-11-131-1/+4
| | | | | | | Reading motherboard sensor, sometimes, takes more than 2 seconds. We don't have asynchronous RPC, increase this timeout will help long sensor reading such as reading GPSD value when GPSD connection is unreliable.
* rfnoc: Replace some [] with .at() in radio_ctrl_implMartin Braun2018-11-131-8/+8
| | | | | This makes it easier to detect errors in derived classes that expect getters in radio_ctrl_impl to also do error checking.
* rh: initialize switchesMark Meserve2018-11-071-3/+10
|
* x300: Remove 120 MHz optionMartin Braun2018-11-072-3/+1
| | | | | None of our FPGA images support a 120 MHz master clock rate, so the UHD code should match that.
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
| | | | - Improves performance for frequencies greater than 3.5 GHz
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
| | | | | | | | | - This is a combination of 5 commits. - rh: add lo distribution board gpio expander - rh: add lo distribution mpm functions - rh: add code to conditionally initialize lo distribution - rh: change empty i2c device from exception to assertion - rh: add lo distribution board control
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
|
* cmake: Change SOVERSION and VERSION for the library filesMartin Braun2018-10-291-2/+2
| | | | | | The SOVERSION will now match the ABI string, and the VERSION matches the full UHD version. This will allow easier parallel installation of multiple versions of UHD.
* cores:rx_frontend_core_3000: fix real modeGwenhael Goavec-Merou2018-10-291-0/+2
|
* python: Add missing constructors of time_spec_tPiotr Krysik2018-10-251-0/+3
| | | | | | Currently Python interface of time_spec_t exposes only constructor with 'double' parameter. Other constructors are also important as they provide higher precision. This change adds them to the Python API.
* rh: add support for rhodium devicesMark Meserve2018-10-2514-3/+3580
| | | | | | Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ni.com>
* Test: Add unit test for eeprom_utilsmichael-west2018-10-252-2/+2
|
* X300: Prevent duplicate MAC and IP addresses from being programmed in MBMichael West2018-10-252-2/+104
| | | | EEPROM
* X300: Add recovery for duplicate IP addresses in EEPROMMichael West2018-10-252-19/+13
| | | | | - Limit initialization to ZPU communication if recover_mb_eeprom=1 is set in device args.
* block_ctrl_base: add UHD_SAFE_CALL to destructorTrung Tran2018-10-241-13/+15
| | | | | This will stop the exception throw during destructor of E310 where new FPGA image(idle image) is load.
* UHD: Fix RX streamer SOB and EOB handlingMichael West2018-10-241-2/+9
|
* twinrx: revise adf5356 frac2 register calculationMark Meserve2018-10-171-1/+1
| | | | | - If FRAC2 isn't exactly FRAC1 at certain frequencies, drifting spurs can be seen in the spectrum
* B200: Restore asynchronous reset of AD936x.michael-west2018-10-172-4/+15
|
* lmx2592: remove initial scratch register readbackMark Meserve2018-10-171-24/+0
| | | | | - This is the only read operation in the driver, so removing it simplifies the driver's requirements significantly.
* lmx2592: add spur dodgingMark Meserve2018-10-172-23/+330
|
* lib: ad9361: De-boostify AD9361 driverMartin Braun2018-10-172-106/+195
| | | | No functional or API changes.
* multi_usrp: Add sync_source APIMartin Braun2018-10-111-6/+160
| | | | | | | | | | The sync_source API is an atomic setter for all sync-related settings. If supported by the underlying USRP, it can be faster to call set_sync_source() rather than sequentially calling set_clock_source() and set_time_source(). If the underlying device does not support the sync_source API, it will fall back to the set_clock_source() and set_time_source() APIs, making this change backward-compatiple.
* uhd: Add traffic counter to null source sinkCiro Nishiguchi2018-10-111-0/+19
|
* mpmd: Increase rpcc timeout when calling set_time_source()Trung Tran2018-10-111-0/+2
| | | | | | | set_time_source() for N310 and N300 can take longer than the default RPC client timeout of 2 seconds due to dboard initialization. We need increase this timeout, by using the init timeout value which is 2 minutes.
* uhd: Fix rounding in ddc/duc rate calculationCiro Nishiguchi2018-10-052-2/+2
| | | | | | | | The DDC and DUC convert the requested rate to an integer before selecting a decimated / interpolated rate. This causes the selection to select a lower rate than requested in some corner cases. The effect is more pronounced when the input rate of the DDC or the output rate of the DUC is very small.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 18:44:11 +0000