aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* multi_usrp_rfnoc: Fix get_rx/tx_rates()steviez2020-04-131-12/+10
| | | | | This replaces incorrect code with the proper function calls to retrieve the range of possible sample rates.
* fixup! uhd: Add fuzzy serial number checkingmattprost2020-04-092-4/+3
|
* lib: Properly do reset routines in client_zeroMartin Braun2020-04-091-2/+6
| | | | | The current reset routines write a '1' twice for reset, instead of '0' then '1' (resets get triggered on a rising edge).
* uhd: mpm: Query prefs per-device for multi-device queriesLane Kolbly2020-04-083-6/+16
| | | | | | | If a user specifies a multi-device query, such as "serial0=1234,serial1=4321", we have to look up the preferences for each device. To minimize the impact to non-x400 devices, I simply push the get_usrp_args call down into mpmd_impl and mpmd_find.
* uhd: Add missing include guardsLane Kolbly2020-04-083-0/+6
|
* uhd: Replace include guards with pragma onceLane Kolbly2020-04-08113-451/+115
| | | | | Pragma once is the more modern version of include guards, eliminating any potential problems with mistyping include guards. Let's use those.
* uhd: Add fuzzy serial number checkingLane Kolbly2020-04-084-1/+55
| | | | | | | | | We have integer 32-bit serial numbers for MPM devices, for example "1234abcd". For serial numbers which have less than eight digits, e.g. "123abcd", a user may feel inclined to prefix this number with a 0 when they are searching for devices, e.g. "0123abcd". This change makes it so that specifying "0123abcd" will match a device with serial number "123ABCD".
* rfnoc: Add FIR filter RFNoC block controllerAaron Rossetto2020-04-072-0/+102
|
* fixup! rfnoc: Use multichannel register interface for RFNoC blocksmattprost2020-04-073-9/+9
|
* uhd: math: Add interpolation.hppMartin Braun2020-04-073-4/+146
| | | | | | | | - Moves linear_interp from cal to utils - Moves the interp_mode enum class to interpolation.hpp - Adds three interpolation methods for maps: at_interpolate_1d(), at_nearest(), at_lin_interp() - Adds unit tests
* uhd: paths: Harmonize around XDG Base Directory specificationMartin Braun2020-04-024-34/+137
| | | | | | | | | | | | | | | | | | | | | | Up until now, we completely ignore the XDG specification. This commit does the following to change that: - It uses XDG_DATA_HOME and XDG_CONFIG_HOME for cal and config data, respectively. - If config data is in ~/.uhd/uhd.conf, that is still accepted, but if it conflicts with $XDG_CONFIG_HOME/uhd.conf, it is ignored and a warning is displayed - The default location for cal data is thus ${HOME}/.local/share/uhd/cal on Unix, and %LOCALAPPDATA%\uhd\cal on Windows. This is a change in location! - The UHD_CONFIG_DIR environment variable was confusingly named and is now removed. It provided an alternative location than the home directory. The same purpose is now much better served by XDG_DATA_HOME and XDG_CONFIG_HOME. The specification can be found here: specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html
* rfnoc: Use multichannel register interface for RFNoC blocksmattprost2020-04-024-54/+61
| | | | | | | | Allows RFNoC blocks to perform register peeks and pokes on blocks with multiple channels without having to worry about handling register address translation every time. Signed-off-by: mattprost <matt.prost@ni.com>
* uhd: cal: Use usrp::cal::database instead of CSV filesMartin Braun2020-04-024-170/+200
| | | | | | | | | Now that we have cal::iq_cal and cal::database, there's no need to manually wrangle CSV files for calibration data. This commit replaces all CSV operations with cal::database calls and uses cal::iq_cal as a container. CSV files can still be read, but are considered deprecated.
* uhd: cal: Add iq_cal calibration data container classMartin Braun2020-04-023-0/+237
| | | | | | | | This class can be used to store calibration coefficients for the X300 DC offset and IQ imbalance calibration. Note: This also modifies Doxyfile.in to not document files generated by flatc.
* multi_usrp: Fix ALL_CHAN and ALL_MBOARDS API calls for Gen-3 devicesMartin Braun2020-03-311-105/+64
| | | | | | | | Most of the API calls that default an arg to ALL_CHANS or ALL_MBOARDS were in fact broken. This adds a macro to efficiently mux out API calls that take such wildcard arguments so we don't have to repeat the same loop all over the place, even for those API calls that already correctly implemented wildcards (for consistency).
* fixup! x300: lf/basic antenna API implementationMartin Braun2020-03-261-2/+2
|
* uhd: cal: Add database classMartin Braun2020-03-266-0/+282
| | | | | | This class contains methods to store and retrieve data from the local calibration database. Note that in this case, the "database" is just a bunch of files on the local filesystem.
* uhd: paths: Add get_cal_data_path() API callMartin Braun2020-03-261-0/+19
| | | | This points to the location where cal data is stored.
* x300: lf/basic antenna API implementationmattprost2020-03-234-110/+234
| | | | | | | | | | | | | | | | This results in a change of operation for LF/Basic Boards on X300/X310 devices. The RX streaming mode will now be specified by the antenna rather than the subdev: (AB or BA for complex streaming, and A or B for real-mode streaming, with AB being the default antenna value). For real-mode streaming, data is collected as complex data with zeroed-out values in the quadrature domain. The subdevs for these boards have been changed to 0 and 1 for the RX channels, and 0 for the TX channel, in order to align with subdev specs of other RFNoC devices. Note: the old streaming mode paradigm is still in place for the N210.
* cmake: Add CMakeRC module and ::rc namespaceMartin Braun2020-03-182-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | This module allows to add binary files into UHD (e.g., for cal data storage) in a platform-independent way. The upstream CMakeRC.cmake is modified in the following way to allow linkage against a shared object: ```diff # Generate the actual static library. Each source file is just a single file # with a character array compiled in containing the contents of the # corresponding resource file. add_library(${name} STATIC ${libcpp}) set_property(TARGET ${name} PROPERTY CMRC_LIBDIR "${libdir}") set_property(TARGET ${name} PROPERTY CMRC_NAMESPACE "${ARG_NAMESPACE}") target_link_libraries(${name} PUBLIC cmrc::base) set_property(TARGET ${name} PROPERTY CMRC_IS_RESOURCE_LIBRARY TRUE) + set_property(TARGET ${name} PROPERTY POSITION_INDEPENDENT_CODE ON) ``` This forces the -fPIC flag for the static object that CMakeRC generates, allowing to link it into a shared object file. The version of CMakeRC used is: a7e355290, cloned from git@github.com:vector-of-bool/cmrc.git.
* lib: deps: Add FlatBuffers 1.11.0 header filesMartin Braun2020-03-1816-0/+9175
| | | | | | | | | | FlatBuffers is used to (de-)serialize calibration data. For most use cases, only a few headers are required, so we provide them with UHD instead of requiring all UHD users to install their own version of FlatBuffers. This adds the headers to host/lib/deps, and updates the Debian copyright file appropriately.
* lib: Use from_str<bool> in constrained_device_args_tAaron Rossetto2020-03-181-17/+7
| | | | | | | This modifies `constrained_device_args_t::bool_arg::parse()` to use `uhd::cast::from_str<bool>` to interpret strings as Boolean values, deduplicating the string parsing code and single-sourcing it from `uhd::cast`.
* utils: Add bool specialization to cast::from_str()Aaron Rossetto2020-03-181-0/+25
| | | | | | | This adds a specialization to `uhd::cast::from_str()` to handle `bool` as a target type and interpret strings like 'y', 'Y', 'n', 'No', 'True', 'False', etc. as Boolean values, as well as the traditional '0' and '1' (which also work).
* tests: Allow custom mock_reg_iface_t in mock blockAaron Rossetto2020-03-131-2/+4
| | | | | | Allow clients to pass a custom instance of a mock_reg_iface_t for use with mock_block_container. This is especially useful when a block test subclasses mock_reg_iface_t to implement specialized behaviors.
* multi_usrp: Provide valid return value for multi_usrp::get_device()Martin Braun2020-03-121-3/+51
| | | | | | | | | | | | For RFNoC devices, multi_usrp::get_device() no longer returns a device pointer, rather, it returns a nullptr. This is intentional because access to the underlying device is no longer allowed. However, legacy code can segfault (e.g. portions ofr gr-uhd). This patch returns a faux uhd::device class, which almost mimicks the original behaviour perfectly, by redirecting its class methods back to multi_usrp_rfnoc. The only exception is recv_async_msg(), which requires a TX streamer. This function will always return false now.
* utils/C API: Fix property tree accessMartin Braun2020-03-121-4/+4
| | | | | | | | | | The introduction of multi_usrp_rfnoc caused multi_usrp::get_device()->get_tree() to segfault for gen3 devices. In defcb174, we introduced a fix for this (multi_usrp::get_tree()) but we didn't apply it to internal utilities. That means the uhd_cal_* utilties were broken, along with certain sections of the C API, and the latency test suite. This fixes the segfault issue.
* python: Export UHD paths utility functionsMartin Braun2020-03-121-0/+24
| | | | | | | | | All of the functions defined in uhd/utils/paths.hpp are now available in Python, with the exception of get_module_paths(). #!/usr/bin/env python3 import uhd print(uhd.get_lib_path()) # Prints location of libuhd
* lib: gain_group: Remove spurious logsMartin Braun2020-03-121-2/+0
| | | | | | Whenever gains where set through a gain_group, it would output spurious log messages that must stem from someone's debug code, since the log messages are not very useful by themselves.
* uhd: Apply clang-format against all .cpp and .hpp files in host/Martin Braun2020-03-03358-22487/+24323
| | | | | Note: template_lvbitx.{cpp,hpp} need to be excluded from the list of files that clang-format gets applied against.
* device: read in preferences file before discoveryAndrew Lynch2020-02-261-1/+3
|
* rfnoc: Reuse the graph objectAndrew Lynch2020-02-261-1/+20
| | | | | Keep a reference to the graph object so that when a new multi_usrp is opened to the same device, the same graph is also used.
* lib: move OSX specific code to where the values are initially setMichael Dickens2020-02-211-0/+11
|
* lib: tweak prototypes to not be constexpr to allow building on OSXMichael Dickens2020-02-211-5/+5
| | | | Make all arguments const, in line with how other static methods are declared.
* rfnoc: actions: Cleanup rx_event_action_info ctorsteviez2020-02-182-9/+14
| | | | | Set error code member variable in rx_event_action_info constructor instead of relying on the caller to set it after object creation
* rfnoc: actions: Fix uninitialized timestampssteviez2020-02-182-9/+13
| | | | | | tx_event_action_info objects were being created with uninitialized timestamp members which led to uhd::tx_streamer::recv_async_msg() returning with invalid timestamps
* x300: add front-panel GPIO source controleklai2020-02-185-43/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a ZPU register to control the FP GPIO source. These are 2bits per GPIO pin, totalling 24 bits. 0 corresponds to RF-A, 1 corresponds to RF-B. The following Python code will control the upper 6 bits of the front-panel GPIO from the B-side radio on an X300: >>> import uhd >>> U = uhd.usrp.MultiUSRP("type=x300") >>> U.get_gpio_src_banks() ['FP0'] >>> U.get_gpio_src("FP0") ['RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA'] >>> U.set_gpio_src("FP0", ['RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFB', 'RFB', 'RFB', 'RFB', 'RFB', 'RFB']) >>> U.get_gpio_src("FP0") ['RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFA', 'RFB', 'RFB', 'RFB', 'RFB', 'RFB', 'RFB'] >>> # Make all GPIOs outputs: >>> U.set_gpio_attr("FP0A", "DDR", 0xFFF) >>> U.set_gpio_attr("FP0B", "DDR", 0xFFF) >>> # Control all GPIOs from software (not ATR): >>> U.set_gpio_attr("FP0A", "CTRL", 0x000) >>> U.set_gpio_attr("FP0B", "CTRL", 0x000) >>> # Bottom 3 pins go high from radio A >>> U.set_gpio_attr("FP0A", "OUT", 0x007) >>> # Top 3 pins go high from radio B >>> U.set_gpio_attr("FP0B", "OUT", 0xE00) Amends the gpio.cpp example to allow switching the source. Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com>
* ad9361: Fix formattingMartin Braun2020-02-102-19/+16
| | | | | - Apply clang-format - Remove unnecessary boost::format
* thread: Fix formatting in thread utilitiesMartin Braun2020-02-101-132/+144
| | | | | - Apply clang-format - Remove unnecessary boost::format
* lib: utils: Don't use hard-coded path constantsRyan Volz2020-02-071-2/+24
| | | | | | | | | | | | | This replaces the package path constant with a runtime library path lookup. The package path is taken to be the parent directory of the library directory. When boost >= 1.61 is not available, this maintains the current behavior of using CMake to set path contants. Runtime path determination is preferable for making a relocatable library so that it is not necessary to do string substitution on relocated binaries (as with, for example, building a conda package).
* rfnoc: ddc: Make scaling optional, prefer to change decimMartin Braun2020-02-071-28/+53
| | | | | | | | | | | This combines two intertwined changes: - The scaling_in and scaling_out properties of the DDC now start off uninitialized. This is to avoid invalid loops of property resolution: When the block is first initialized in a graph context, the default values for scaling over-constrain the resolution problem. - The resolver for samp_rate_in used to prefer changing samp_rate_out, it now prefers to modify the decimation. This is necessary to allow calling set_output_rate() before the graph is committed.
* octoclock: Change type of EEPROM property to mboard_eeprom_tMartin Braun2020-02-042-5/+8
| | | | | | | | | Before, the type was octoclock_eeprom_t, which was incompatible with mboard_eeprom_t and would cause issues with uhd_usrp_probe. octoclock_eeprom_t is a superset of mboard_eeprom_t, and there is no necessity for exposing the additional features to the public. This harmonizes the Octoclock prop tree with the rest of UHD, and fixes an issue where the Octoclock won't allow uhd_usrp_probe on master branch.
* octoclock: Avoid usage of uninitialized memoryMartin Braun2020-02-045-41/+48
| | | | | | | | The Octoclock host code would send uninitialized memory over the network, which would be flagged by tools such as Valgrind. This patch creates a factory function for OctoClock packets that initializes the memory to zero, defaults the proto version to the OctoClock default, and can provide a random sequence number if none is given.
* octoclock: Apply clang-formatMartin Braun2020-02-048-659/+753
|
* multi_usrp: Add get_tree() API callMartin Braun2020-02-042-0/+10
| | | | | | This allows access to the underlying property tree without having to refer to the device object. Useful for RFNoC objects, where the device object is not accessible.
* rfnoc: Create mock factoryMartin Braun2020-01-293-3/+58
| | | | | | This is an API that allows creating mock block controllers, to write unit tests for block controllers. See rfnoc_blocks_test for an example how to use them.
* log: Remove LOG statement from _get_log_level()Martin Braun2020-01-291-2/+1
| | | | | | _get_log_level() is an internal function that only gets called during setup, so the logger isn't ready yet. It thus now logs to stderr instead of the logger.
* utils: log: Name all threadsMartin Braun2020-01-291-5/+16
| | | | | | Logging creates two threads, one for regular logging, and one for fastpath logging. Now these threads are named using uhd::set_thread_name()
* thread: Remove log messages for set_thread_name() when not supportedMartin Braun2020-01-291-10/+14
| | | | | | | | | | | On systems like Windows, set_thread_name() is not supported, and would previously log an error message telling the user that it can't set the thread name. However, that prevents set_thread_name() to be called before the logger is being set up, and the logger would like to use this function. Since it is obvious to the user if threads can be named or not, the log message is considered redundant and is removed.
* rfnoc_device: Remove spurious commentMartin Braun2020-01-231-2/+1
| | | | | This removes a comment that refers to Boost smart pointers, which were removed in UHD.
* multi_usrp: Amend APIs for GPIO source controlMartin Braun2020-01-232-1/+12
| | | | | | | | | | | This adds a new API call to multi_usrp: get_gpio_src_banks(). This returns a list of GPIO banks who's source can be controlled through the motherboard controller. The remaining GPIO source methods' docstrings are improved, to explain the difference between GPIO banks for set_gpio_attr() and set_gpio_src(). The former controls the actual value on a GPIO bank, and the latter who drives it. These can be different banks.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 00:25:04 +0000