uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	e100: better error message for eeprom model error	Josh Blum	2011-12-31	1	-5/+11
\|
*	uhd: manually link into pthreads here	Josh Blum	2011-12-27	1	-0/+1
\|
*	uhd: manually calculate bcast addr, boost version buggy	Josh Blum	2011-12-22	1	-1/+6
\|
*	Merge branch 'network_foo'	Josh Blum	2011-12-21	3	-10/+15
\|\
\| *	usrp2: use the socket to determine the device addr	Josh Blum	2011-12-20	3	-10/+15
\| \|
* \|	usrp: added underflow_policy to tx streamer args	Josh Blum	2011-12-20	5	-1/+16
\|/
*	uhd: network device discovery -> calc bcast addr under certain conditions	Josh Blum	2011-12-20	1	-0/+6
\|
*	basic: minor fix for copy paste typo	Josh Blum	2011-12-20	1	-1/+1
\|
*	Make WBX v3+ TX set max attenuation when idle	Jason Abele	2011-12-16	2	-12/+21
\| \| \| \| \| \| \|	Because WBX v3+ uses digital step attenuator for TX gain control we can set max attenuation via ATR when WBX is in RX_ONLY or IDLE This will reduce the LO leakage during non-transmit times
*	usrp1: fix div ratio for interp register	Josh Blum	2011-12-15	1	-1/+1
\| \| \| \| \|	The interp register was getting set 2x, now fixed! This bug was introduced w/ the streamer work.
*	usrp1: fixed swapped sign on rx cordic	Josh Blum	2011-12-15	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \|	We used to swap I and Q to share converter functions with the newer products. Because of this, the sign on the cordic also had to be swapped. Now that USRP1 has its own converter routines and I and Q are correct, so should be the sign on the cordic. This was a bug introduced in master. TX should not be an issue, because there is no cordic and is adjusted digitally by the codec, after any potential swapping.
*	tvrx: adjust returned lo freq to compensate for negative cordic shift	Josh Blum	2011-12-15	1	-0/+7
\|
*	tvrx: fixes for tvrx since the property tree work	Josh Blum	2011-12-15	1	-6/+6
\|
*	uhd: typo fix for the error print	Josh Blum	2011-12-15	1	-1/+1
\|
*	usrp: better error message when dboard fails in init	Josh Blum	2011-12-15	1	-1/+8
\|
*	uhd: make use of TEMP_FAILURE_RETRY when select()	Josh Blum	2011-12-14	1	-1/+8
\|
*	usrp: added mboard param to set time next pps	Josh Blum	2011-12-12	1	-3/+7
\|
*	UHD will now print 'L' whenever a late packet is transmitted.	Ben Hilburn	2011-12-12	3	-0/+9
\| \| \| \| \|	This is similiar to printing 'U' and 'S'. This functionality is not yet supported on the USRP1.
*	usrp: rx dsp move init code into clear (like tx)	Josh Blum	2011-12-05	1	-6/+7
\|
*	Make TX disable mixer when idle to avoid LO leakage	Jason Abele	2011-12-05	1	-2/+2
\|
*	uhd: work with stream clearing	Josh Blum	2011-12-05	5	-13/+24
\| \| \| \| \| \| \| \|	dont clear when using the compat device API tx clear also resets expected seqnum tx clear on usrp2 resets flow control monitor
*	usrp1: set scale factor after setting converter	Josh Blum	2011-11-30	1	-4/+4
\|
*	b100: tweaks for fpga resets on init	Josh Blum	2011-11-22	1	-11/+8
\|
*	dbsrx: set initial freq and bw filter after clocks enabled	Josh Blum	2011-11-21	1	-4/+8
\|
*	usrp: clear dsp when making new streamer	Josh Blum	2011-11-21	7	-0/+16
\|
*	basic: fix basic db center freq to always zero	Josh Blum	2011-11-20	1	-2/+5
\|
*	Merge branch 'calibration'	Josh Blum	2011-11-16	19	-43/+498
\|\
\| *	e100: added self-cal support with minor speedups	Josh Blum	2011-11-16	2	-0/+23
\| \|
\| *	uhd: support for applying cal corrections B100	Josh Blum	2011-11-15	2	-0/+23
\| \|
\| *	uhd: added freq options and common gain setter	Josh Blum	2011-11-15	1	-2/+4
\| \|
\| *	uhd: different interp methods for IQ vs DC	Josh Blum	2011-11-14	1	-3/+39
\| \|
\| *	uhd: added tx dc offset calibration + tweaks	Josh Blum	2011-11-14	1	-2/+9
\| \|
\| *	usrp: fixed default initialization of iq bal correction	Josh Blum	2011-11-13	3	-6/+6
\| \|
\| *	uhd: created rx IQ imbalance app to parallel tx	Josh Blum	2011-11-11	4	-39/+89
\| \|
\| *	uhd: lots of tweaks for calibration utility	Josh Blum	2011-11-11	1	-1/+3
\| \|
\| *	Updates to accommodate loopback calibration mode	Jason Abele	2011-11-11	4	-30/+71
\| \| \| \| \| \| \| \|	Added CAL antenna to WBX, SBX and RFX
\| *	usrp: basically working iq cal on tx	Josh Blum	2011-11-10	8	-0/+266
\| \|
\| *	uhd: basically usable cal sweep for wbx	Josh Blum	2011-11-10	3	-7/+12
\| \|
* \|	convert: added generic conversion for sc8 wire -> sc8 host	Josh Blum	2011-11-15	2	-2/+23
\| \|
* \|	convert: move priorities to implementation, different for arm	Josh Blum	2011-11-15	2	-5/+17
\| \|
* \|	convert: msvc warning fixes for sc8 table gen	Josh Blum	2011-11-13	1	-1/+3
\| \|
* \|	uhd: fixed sc8 table conversion, and simplified shifts	Josh Blum	2011-11-13	1	-19/+15
\| \|
* \|	convert: added table conversion routines for sc8	Josh Blum	2011-11-12	1	-17/+95
\| \|
* \|	convert: simplify table conversion with templates	Josh Blum	2011-11-12	1	-52/+25
\| \|
* \|	convert: added table conversion routine for sc16 to floats	Josh Blum	2011-11-12	3	-2/+141
\| \|
* \|	convert: made conversion functions into classes so they can keep state	Josh Blum	2011-11-12	5	-41/+25
\| \|
* \|	uhd: convert should use register_bytes_per_item	Josh Blum	2011-11-11	1	-11/+13
\|/
*	usrp: added missing include for weak ptr	Josh Blum	2011-11-08	2	-0/+2
\|
*	usrp1: fix typo when calculating rx_dc_offset register	Josh Blum	2011-11-08	1	-1/+1
\|
*	Clip WBX target freq before computing LO settings	Jason Abele	2011-11-08	3	-0/+9
\|