aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
Commit message (Collapse)AuthorAgeFilesLines
* sbx: fix dboard tuning to cache resultJosh Blum2012-01-054-23/+5
|
* usrp1: initialize tick_rate prop (fixes readback)Josh Blum2012-01-051-1/+2
|
* N210 R4 should be using LVDS TX clock, not CMOS.Nick Foster2012-01-041-4/+17
|
* usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-041-1/+1
|
* uhd: fixes that make uhd compile on freebsdJosh Blum2011-12-301-2/+2
| | | | | Fixes gcc version check in byteswap. Fixes typo in thread prio.
* e100: better error message for eeprom model errorJosh Blum2011-12-311-5/+11
|
* uhd: manually link into pthreads hereJosh Blum2011-12-271-0/+1
|
* uhd: manually calculate bcast addr, boost version buggyJosh Blum2011-12-221-1/+6
|
* Merge branch 'network_foo'Josh Blum2011-12-213-10/+15
|\
| * usrp2: use the socket to determine the device addrJosh Blum2011-12-203-10/+15
| |
* | usrp: added underflow_policy to tx streamer argsJosh Blum2011-12-205-1/+16
|/
* uhd: network device discovery -> calc bcast addr under certain conditionsJosh Blum2011-12-201-0/+6
|
* basic: minor fix for copy paste typoJosh Blum2011-12-201-1/+1
|
* Make WBX v3+ TX set max attenuation when idleJason Abele2011-12-162-12/+21
| | | | | | | Because WBX v3+ uses digital step attenuator for TX gain control we can set max attenuation via ATR when WBX is in RX_ONLY or IDLE This will reduce the LO leakage during non-transmit times
* usrp1: fix div ratio for interp registerJosh Blum2011-12-151-1/+1
| | | | | The interp register was getting set 2x, now fixed! This bug was introduced w/ the streamer work.
* usrp1: fixed swapped sign on rx cordicJosh Blum2011-12-151-1/+1
| | | | | | | | | | | We used to swap I and Q to share converter functions with the newer products. Because of this, the sign on the cordic also had to be swapped. Now that USRP1 has its own converter routines and I and Q are correct, so should be the sign on the cordic. This was a bug introduced in master. TX should not be an issue, because there is no cordic and is adjusted digitally by the codec, after any potential swapping.
* tvrx: adjust returned lo freq to compensate for negative cordic shiftJosh Blum2011-12-151-0/+7
|
* tvrx: fixes for tvrx since the property tree workJosh Blum2011-12-151-6/+6
|
* uhd: typo fix for the error printJosh Blum2011-12-151-1/+1
|
* usrp: better error message when dboard fails in initJosh Blum2011-12-151-1/+8
|
* uhd: make use of TEMP_FAILURE_RETRY when select()Josh Blum2011-12-141-1/+8
|
* usrp: added mboard param to set time next ppsJosh Blum2011-12-121-3/+7
|
* UHD will now print 'L' whenever a late packet is transmitted.Ben Hilburn2011-12-123-0/+9
| | | | | This is similiar to printing 'U' and 'S'. This functionality is not yet supported on the USRP1.
* usrp: rx dsp move init code into clear (like tx)Josh Blum2011-12-051-6/+7
|
* Make TX disable mixer when idle to avoid LO leakageJason Abele2011-12-051-2/+2
|
* uhd: work with stream clearingJosh Blum2011-12-055-13/+24
| | | | | | | | dont clear when using the compat device API tx clear also resets expected seqnum tx clear on usrp2 resets flow control monitor
* usrp1: set scale factor after setting converterJosh Blum2011-11-301-4/+4
|
* b100: tweaks for fpga resets on initJosh Blum2011-11-221-11/+8
|
* dbsrx: set initial freq and bw filter after clocks enabledJosh Blum2011-11-211-4/+8
|
* usrp: clear dsp when making new streamerJosh Blum2011-11-217-0/+16
|
* basic: fix basic db center freq to always zeroJosh Blum2011-11-201-2/+5
|
* Merge branch 'calibration'Josh Blum2011-11-1619-43/+498
|\
| * e100: added self-cal support with minor speedupsJosh Blum2011-11-162-0/+23
| |
| * uhd: support for applying cal corrections B100Josh Blum2011-11-152-0/+23
| |
| * uhd: added freq options and common gain setterJosh Blum2011-11-151-2/+4
| |
| * uhd: different interp methods for IQ vs DCJosh Blum2011-11-141-3/+39
| |
| * uhd: added tx dc offset calibration + tweaksJosh Blum2011-11-141-2/+9
| |
| * usrp: fixed default initialization of iq bal correctionJosh Blum2011-11-133-6/+6
| |
| * uhd: created rx IQ imbalance app to parallel txJosh Blum2011-11-114-39/+89
| |
| * uhd: lots of tweaks for calibration utilityJosh Blum2011-11-111-1/+3
| |
| * Updates to accommodate loopback calibration modeJason Abele2011-11-114-30/+71
| | | | | | | | Added CAL antenna to WBX, SBX and RFX
| * usrp: basically working iq cal on txJosh Blum2011-11-108-0/+266
| |
| * uhd: basically usable cal sweep for wbxJosh Blum2011-11-103-7/+12
| |
* | convert: added generic conversion for sc8 wire -> sc8 hostJosh Blum2011-11-152-2/+23
| |
* | convert: move priorities to implementation, different for armJosh Blum2011-11-152-5/+17
| |
* | convert: msvc warning fixes for sc8 table genJosh Blum2011-11-131-1/+3
| |
* | uhd: fixed sc8 table conversion, and simplified shiftsJosh Blum2011-11-131-19/+15
| |
* | convert: added table conversion routines for sc8Josh Blum2011-11-121-17/+95
| |
* | convert: simplify table conversion with templatesJosh Blum2011-11-121-52/+25
| |
* | convert: added table conversion routine for sc16 to floatsJosh Blum2011-11-123-2/+141
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 15:12:59 +0000