aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Collapse)AuthorAgeFilesLines
...
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
|
* cores:rx_frontend_core_3000: fix real modeGwenhael Goavec-Merou2018-10-291-0/+2
|
* rh: add support for rhodium devicesMark Meserve2018-10-2511-1/+3479
| | | | | | Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ni.com>
* Test: Add unit test for eeprom_utilsmichael-west2018-10-251-1/+1
|
* X300: Prevent duplicate MAC and IP addresses from being programmed in MBMichael West2018-10-251-2/+24
| | | | EEPROM
* X300: Add recovery for duplicate IP addresses in EEPROMMichael West2018-10-252-19/+13
| | | | | - Limit initialization to ZPU communication if recover_mb_eeprom=1 is set in device args.
* B200: Restore asynchronous reset of AD936x.michael-west2018-10-172-4/+15
|
* lmx2592: remove initial scratch register readbackMark Meserve2018-10-171-24/+0
| | | | | - This is the only read operation in the driver, so removing it simplifies the driver's requirements significantly.
* lmx2592: add spur dodgingMark Meserve2018-10-171-22/+326
|
* lib: ad9361: De-boostify AD9361 driverMartin Braun2018-10-172-106/+195
| | | | No functional or API changes.
* multi_usrp: Add sync_source APIMartin Braun2018-10-111-6/+160
| | | | | | | | | | The sync_source API is an atomic setter for all sync-related settings. If supported by the underlying USRP, it can be faster to call set_sync_source() rather than sequentially calling set_clock_source() and set_time_source(). If the underlying device does not support the sync_source API, it will fall back to the set_clock_source() and set_time_source() APIs, making this change backward-compatiple.
* mpmd: Increase rpcc timeout when calling set_time_source()Trung Tran2018-10-111-0/+2
| | | | | | | set_time_source() for N310 and N300 can take longer than the default RPC client timeout of 2 seconds due to dboard initialization. We need increase this timeout, by using the init timeout value which is 2 minutes.
* mg: fixup set_rx_antennaTrung Tran2018-10-041-1/+1
| | | | | | After going to 2 radios configuration (FPGA), the channnel value is passed into this set_rx_antenna now have value either 0 or 1. We want the mapping of {radio_channel:cpld_channel} = {0:CHAN1} or {1:CHAN2}.
* multi_usrp: move definition of constantsAndrew Lynch2018-10-041-0/+2
| | | | ALL_MBOARDS and ALL_CHANS will be exported on GCC and MSVC
* cores: Update rx_frontend_gen3.v controls for 1/4-rate mixerMartin Braun2018-09-252-8/+12
| | | | | | | This tracks the changes on rx_frontend_gen3.v, which was updated to use a quarter-rate downconverter instead of a generic CORDIC. The X3x0 FPGA compat number is incremented as the rx_frontend is part of the device architecture rather than an RFNoC block.
* e320: Fix master_clock_rate settingSugandha Gupta2018-09-241-0/+4
| | | | | | The master clock rate was getting overwritten while running the codec loopback self test. So now we save the current rate before running the test and then reapply it.
* uhd: rfnoc: add async message handlerTrung Tran2018-09-141-2/+29
|
* mg: clipping frequencyTrung Tran2018-09-142-4/+7
| | | | | Clipping requested frequency to acceptable ranges in Magnesium TX/RX set frequency functions.
* x300_impl: remove default_buff_args propertiesTrung Tran2018-09-131-7/+0
| | | | ...that are already handled in udp_zero_copy.
* device3_io_impl: remove tx_hint[send_buff_size]Trung Tran2018-09-131-6/+0
| | | | | we're no longer need this. Because there are default send buff size in each transport type impl.
* mpmd: add link speed to xport udpTrung Tran2018-09-131-6/+29
| | | | This is used to determine send_buff_size and recv_buff_size
* fixup! DDC/DUC: switch CORDIC -> DDS for all relevant variable namesmichael-west2018-09-132-12/+12
|
* e320: gpio: Fix front panel GPIO readbackSugandha Gupta2018-09-121-1/+4
| | | | The gpio devtest passes after this fix. Enabling the test
* mpmd: add option to enum rfnoc blocks from argsTrung Tran2018-08-311-5/+21
|
* x300: Improve firmware compat error messageMartin Braun2018-08-222-16/+35
| | | | | Now matches the FPGA error message (go download, then run uhd_image_loader).
* X300: Correctly initialize antenna mapping for TwinRXDerek Kozel2018-08-221-1/+4
|
* twinrx: enable ch1 lo amps if ch2 is using an external lo sourceMark Meserve2018-08-211-1/+13
| | | | | - AMP_LO1_EN_CH1 controls U2, the amp for the external LO1 port, so it must be set high if channel 2 is using an external LO (external or reimport)
* uhd: Remove usage of time_t (except when required)Martin Braun2018-08-203-8/+8
| | | | | | | | | | The C/C++ standards don't define what time_t is, only that it is arithmetic (and real for C11, and integral for C++). It should not be used in portable software and is only used as the return value for some libc calls. A common definition for time_t is int64_t, so we'll switch to that permanently in our own APIs. System APIs will of course stick with time_t.
* multi_usrp: Add get_user_settings_iface() API callMartin Braun2018-08-161-0/+12
| | | | | | | | | | | For USRPs that support user settings (e.g., B2xx, N230), this will return an object that will allow peeking and poking user-defined settings registers. Mock code example: auto usrp = multi_usrp::make(...); auto user_settings_iface = usrp->get_user_settings_iface(); user_settings_iface->poke32(0, 23);
* b200: Enable access to user regs via the 'enable_user_regs' argMartin Braun2018-08-163-4/+31
|
* b200: Remove superfluous fake lambdaMartin Braun2018-08-161-11/+10
| | | | No functional changes. Cleanup only. A little less Boost.
* x300: Enable clock_source and time_source device argsMartin Braun2018-08-101-2/+2
| | | | | | | | | | You can now change the time/clock source default through device args: auto usrp = uhd::usrp::multi_usrp::make( "type=x300,clock_source=external,time_source=external"); This also enables the use of config files for the clock/time source implicitly.
* x300: Use constrained_argsMartin Braun2018-08-104-48/+222
| | | | | | | x300_impl will now use a constrained_device_args_t-derived object to parse device args. No API or functional changes.
* x300: Move defaults to their own headerMartin Braun2018-08-103-116/+159
| | | | | | | Also puts all defaults into the uhd::usrp::x300 namespace. This commit does some renaming and refactoring, but no functional changes.
* e320: Fix tx/rx atr - antenna and frequency settingsSugandha Gupta2018-08-095-30/+32
| | | | | | - Change RX/TX min/max frequency according to AD9361 datasheet - Fix set_atr_bits to change with rx/tx frequency and antenna independently - Make AMP switching active high
* fixup! mpm: mg: add set_master_clock_rate memberMartin Braun2018-08-031-2/+2
|
* rfnoc: dma_fifo: Added a more robust flush mechanismAshish Chaudhari2018-08-031-35/+59
| | | | | | | | | - The flushing mechanism now looks similar to that in noc_shell - Make use of new flush bit in FIFO control register - Restrict using the clear bit only after flushing to ensure no partial packets are introduced in the stream. (clear immediately empties out FIFOs) - Changes are backwards compatible with older FPGAs
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
|
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
|
* mpmd: Allow setting time_source and clock_source propsMartin Braun2018-08-021-24/+4
| | | | | Before, setting these properties in the prop tree would trigger an exception.
* x300: Log git hash and compat number as debug messageMartin Braun2018-08-011-3/+8
|
* b100: Demote some clocking-related log messages to traceMartin Braun2018-07-311-2/+2
|
* b100: Remove all Boostisms from fifo_ctrl_excelsiorMartin Braun2018-07-311-9/+9
|
* b100: Fix fifo_ctrl_excelsior not exitingMartin Braun2018-07-311-13/+2
|
* b100: Move fifo_ctrl_excelsior to b100 subdirMartin Braun2018-07-315-2/+53
| | | | | This device is the only one using it, and no one will ever use it going forward.
* lmx2592: fix calibration start during tuningMark Meserve2018-07-311-1/+3
| | | | - This bug could cause LO to not lock properly after a set_frequency call
* lmx2592: always mux lock detect after initMark Meserve2018-07-311-9/+5
|
* mpmd: Parallelize broadcast-findingMartin Braun2018-07-311-2/+11
| | | | This will broadcast on all interfaces concurrently, instead of serially.
* X300: Change Ethernet bufferingMichael West2018-07-255-290/+285
| | | | | | | Ethernet buffering is now done so that most of the buffering is done in the socket buffers and multiple frames are only used to support the receive side offload of the socket I/O. Eliminates dropped packets at high full duplex rates.
* Device3: Constrain send_buff_sizeMichael West2018-07-251-6/+12
| | | | | send_buff_size is now constrained to input fifo size, and we increase timeout on getting flow control to reduce CPU usage.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-03 21:39:39 +0000