aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Collapse)AuthorAgeFilesLines
* B200: added support for reading the exact product name from EEPROM for B200 ↵Neel Pandeya2014-09-251-0/+15
| | | | and B210
* x300: Added output sync for DAC reference clocksMartin Braun2014-09-241-0/+1
|
* uhd: Fixed logging bug (#476) -- UHD logging has unexplained effect on ↵michael-west2014-09-241-8/+0
| | | | | | | packet loss. - Removed logging from radio_ctrl_core_3000 - Changed logging facility to prevent type conversion when message is not logged
* sbx: Fixed logging string (showed TX instead of RX)Martin Braun2014-09-241-1/+1
|
* usrp: don't print duplicate GPSDO detection messagesNicholas Corgan2014-09-233-6/+1
|
* cbx: Fixed LO FRAC truncationMartin Braun2014-09-231-4/+6
|
* x300_dboard_iface: added UHD_UNUSED() macro to unused parameters in ↵Nicholas Corgan2014-08-291-1/+1
| | | | | | set_clock_enabled() * Removes GCC warning about unused parameters
* Bumping FPGA compat to 7.michael-west2014-08-181-1/+1
|
* Changed analog delay on DAC reference and radio clocks from 1075ps to 900psmichael-west2014-08-181-4/+4
|
* - Fixes for channel alignmentmichael-west2014-08-185-56/+42
| | | | | | | | | | - Added analog delay for radio clock - Added analog delay for DAC reference clocks - Removed resetting of clock control - Removed setting of reference clock and PPS to external sources during initialization - Fixes for set_time_unknown_pps - Removed wait for PPS edge after setting time from GPSDO - Changed set_time_unknonw_pps to time out based on system time rather than device VITA time
* Merge branch 'maint' into uhd/bug492michael-west2014-07-307-49/+167
|\ | | | | | | | | Conflicts: host/lib/usrp/b200/b200_impl.cpp
| * tx fe corrections: fixing mixed tabs / spaces, other horrible whitespace cruftBen Hilburn2014-07-252-14/+11
| |
| * Merge 'maint' into x300/bug513Ben Hilburn2014-07-252-3/+4
| |\
| | * Commented out warning if X300 reference clock fails to lock within 1 second ↵michael-west2014-07-221-2/+3
| | | | | | | | | | | | during initialization. Sometimes it takes longer and that is OK.
| | * Fix for BUG #517: B200: Regression of power level on RXmichael-west2014-07-221-1/+1
| | | | | | | | | | | | - Fixed scalar for RX DSP core
| * | X300: Added UHD support for TX FEIan Buckley2014-07-182-1/+14
| |/
| * Updated copyright year.michael-west2014-07-171-1/+1
| |
| * Fix for BUG #469michael-west2014-07-171-0/+2
| | | | | | | | - Added mutex for write_uart()
| * - Changed variables from uint8_t to uint32_t so parsing of hex strings would ↵michael-west2014-07-171-3/+3
| | | | | | | | work properly.
| * Addressing comments from review.michael-west2014-07-172-15/+21
| | | | | | | | | | | | - Corrected types of some variables to be boost types. - Removed debugging code accidentally left in. - Changed some compiled out error messages to log messages.
| * Fix for BUG #469: Bad/Empty GPS NMEA strings returned when the queries are ↵michael-west2014-07-172-20/+108
| | | | | | | | | | | | | | | | | | made in a random wait iterative fashion Fix for BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OK - Added checksum verification of NMEA strings - Improved handling of short or malformed strings - Fixed GPSDO data synchronization between X300 firmware and host
| * Merge branch 'origin/b200/bug516' into maintBen Hilburn2014-07-171-4/+4
| |\ | | | | | | | | | Fixing B200 clock rate float compare.
| | * BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-07-101-1/+1
| | | | | | | | | | | | - Addressed feedback from review.
| | * Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-06-181-3/+3
| | | | | | | | | | | | - Corrected clock rate checks for B2x0
| | * Fix for BUG #516: B210: Fails to Run with 30.72 MHz Clockmichael-west2014-06-181-3/+3
| | | | | | | | | | | | - Corrected clock rate checks for B2x0
| * | Merge branch 'origin/ashish/rx_pcie_overflows' into maintBen Hilburn2014-07-172-3/+7
| |\ \
| | * | x300: Bugfix for overflows on PCIe at 200MS/sAshish Chaudhari2014-06-272-3/+7
| | |/
| * | Merge branch 'origin/b200/bug512' into maintBen Hilburn2014-07-171-9/+15
| |\ \ | | | | | | | | | | | | B200 now creates internal PPS. Depends on FPGA change.
| | * | Enhancement #512: B210: Need an Internal PPSmichael-west2014-06-131-9/+15
| | | | | | | | | | | | | | | | - Added support for internal PPS selection (set as default)
| * | | Fix for BUG #527: N200: 50 Msps results in two tonesmichael-west2014-07-011-1/+2
| | |/ | |/| | | | | | | - Adjusted check to enable first half-band filter only if the rate is decimated enough between the CIC and other half-band filter
* / | Fix for BUG #492: UHD: set_time_unknown_pps() fails with GPSDO installedmichael-west2014-06-253-3/+17
|/ / | | | | | | - Added polling for PPS time change after setting time from GPSDO.
* | Merge branch 'origin/b200/bug500' into maint - Fixing B200 phase alignment issueBen Hilburn2014-06-163-3/+9
|\ \ | |/ |/|
| * - Changed XOR to OR for REG_DSP_RX_MUX flags.michael-west2014-06-121-3/+3
| |
| * Fix for BUG #500: B210: RX channels are not phase alignedmichael-west2014-06-063-3/+9
| | | | | | | | - Adding UHD side code to invert second RX channel
* | Lots of bit-specific type work to fix compilation on older OSes.Ben Hilburn2014-05-214-15/+15
|/
* x300: adding include to fix builds on older systemsBen Hilburn2014-05-201-0/+1
|
* Fixing Bug #473 - Autoselection of VCO Frequency in DBSRX2Ben Hilburn2014-05-201-6/+8
|\
| * Fixed whitespace and added comment.michael-west2014-05-201-5/+6
| |
| * Fix for BUG 473: UHD: DBSRX2 VCO Autoselect Failing / Wrong Frequency Rangemichael-west2014-05-131-3/+4
| | | | | | | | | | - Corrected frequency range for DBSRX2 - Corrected register write order when changing frequency
* | Fix for BUG 456: LED TX/RX colors backwards on X300michael-west2014-05-161-2/+2
|/ | | | - Corrected bit masks so TX will light the red LED and RX will light the green LED
* Merge branch 'origin/martin/multi_usrp/bug_dc_offset' into maintBen Hilburn2014-05-081-5/+25
|\
| * multi_usrp: Throws warnings for some tree propsMartin Braun2014-05-051-5/+25
| | | | | | | | | | | | | | Until now, multi would simply access some property and assume it exists. A call for set_tx_dc_offset() on a B210 would thus throw errors. This checks for B-series-only leaf nodes before doing anything and displays a warning instead.
* | BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OKmichael-west2014-05-061-1/+8
| | | | | | | | | | | | - It was found that strings containing only a newline character were being returned by N-series and X-series devices. - Added better handling of strings received under 6 bytes. - Added erasing of end of line characters.
* | usrp2: fixed usrp2_card_burner.py and usrp_n2xx_simple_net_burner paths in ↵Nicholas Corgan2014-05-062-4/+17
|/ | | | incompatibility error messages
* x300: Bumped FPGA compat number to 6.Ashish Chaudhari2014-04-281-1/+1
|
* x300: Changed bus_clk frequency to 166.67MHz.Ashish Chaudhari2014-04-281-1/+1
|
* x300: Bumped FPGA compat number to 5.Ashish Chaudhari2014-04-251-1/+1
|
* x300: Addressed review feedbackAshish Chaudhari2014-04-251-11/+13
| | | | | - Fixed synchronization for unclaim - Removed stray RIO addr space set
* x300: Added synchronization between device claiming and checking.Ashish Chaudhari2014-04-242-5/+40
| | | | | - We now maintain a registry of pcie ZPU transports - Added static mutex for claimer
* x300: Added hardware flush mechanism to PCIe logic.Ashish Chaudhari2014-04-241-2/+8
| | | | | - Added DMA enabled states to DMA logic to allow for hardware data flushing during init. - niusrprio_session will now check for FPGA busy before downloading
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 22:24:58 +0000