aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Collapse)AuthorAgeFilesLines
* n230: Make second dual-eth addr consistent with standardAshish Chaudhari2016-11-141-2/+2
| | | | - The second address argument was changed from "secondary-addr" to "second_addr"
* Remove all boost:: namespace prefix for uint32_t, int32_t etc. (fixed-width ↵Martin Braun2016-11-08173-2285/+2286
| | | | | | | | types) - Also removes all references to boost/cstdint.hpp and replaces it with stdint.h (The 'correct' replacement would be <cstdint>, but not all of our compilers support that).
* X300: Fix for channel 1 failure to ACK a TX burst.michael-west2016-11-071-24/+60
| | | | | | - Added mapping from radio block and port to channel in legacy compat layer. - Improved parsing of stream args and added parsing of radio ID and port parameters for each channel. - Added proper programming of the response SID based on the new radio ID and port parameters.
* device3: Removed some superfluous includesMartin Braun2016-11-042-12/+1
|
* X300: Check dboard time property before subscribingDerek Kozel2016-11-042-6/+7
| | | | | If a daughterboard does not have a time/cmd property then no subscriber should be added to the motherboard time/cmd property.
* TwinRX: Add rev B daughterboard IDDerek Kozel2016-11-011-0/+9
|
* xcvr: Removed some compiler warningsMartin Braun2016-10-271-1/+1
|
* TwinRX: Remove unhelpful warningDerek Kozel2016-10-261-8/+0
|
* TwinRX: Use command time to schedule synchronous eventsDerek Kozel2016-10-265-6/+104
|
* x300: Throttle MTU to 3000 for PCIe to avoid underrunsMartin Braun2016-10-251-1/+4
| | | | This is a temporary workaround to make PCIe available on lower rates.
* b200: Make sure no GPS settings are applied when no gpsdo present.Martin Braun2016-10-181-1/+4
| | | | | | | This changes the exception message thrown when gpsdo is selected as a clock source, but does not change the exception. Note that before, during its first run, the B2x0 would happily accept gpsdo as a clock source even when none was present.
* Fix warning in e300_remote_codec_ctrl.cpp for gcc.Philip Balister2016-10-181-2/+2
| | | | | | | | The bigger question is why uhd forces the e300 code to have an implementation of an empty function. But, suppress the warning and let people fight about design later. Signed-off-by: Philip Balister <philip@opensdr.com>
* x300: Add time sync procedure to device initializationMartin Braun2016-10-131-1/+9
| | | | Reviewed-By: Derek Kozel <derek.kozel@ettus.com>
* UBX: changed default performance parametersNicolas Cuervo2016-10-071-5/+5
|
* UHD: Fixed the max link warning for the case where there are multiple ↵Paul David2016-10-051-0/+2
| | | | motherboards
* max2871: Added label for the bit region VAS_DLYPaul David2016-10-051-0/+7
| | | | - Also added a template specialization for enabling the VAS_DLY bit locations based on VAS_TEMP setting (aka retune)
* bugfix: TwinRX: Use correct LEDs when mapping chan -> antAshish Chaudhari2016-09-302-23/+30
| | | | | | | | | - Added LED controller objects for each block port in radio - Added desired subscribers for each frontend's antenna property that updates LED ATR values Reviewed-By: Martin Braun <martin.braun@ettus.com> Reviewed-By: Marcus Müller <marcus.mueller@ettus.com>
* xcvr: Query ref clock, not ADC/DAC clockMartin Braun2016-09-291-1/+1
| | | | | On the USRP2 and N2x0, these values are the same, but on the X3x0, they might differ.
* B2xx: fixed a typo when checking arguments on a streamerPaul David2016-09-271-1/+1
|
* bugfix: db eeprom id not being written for X3x0Ashish Chaudhari2016-09-274-8/+10
| | | | | | | | - The value of db_eeprom_t being written was stale due to a caching bug - Updated subscriber for db_eeprom_t to write the EEPROM state *and* cache it locally Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* x300: Added ignore-cal-file as an optionMartin Braun2016-09-273-3/+17
| | | | | Reviewed-By: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Martin Braun <martin.braun@ettus.com>
* Correct maximum link rates for 1GE and 10GEMarcus Müller2016-09-271-5/+11
|
* gps: Removed redundant error message in case no GPS presentMartin Braun2016-09-271-2/+1
| | | | | Signed-off-by: Martin Braun <martin.braun@ettus.com> Reviewed-By: Moritz Fischer <moritz.fischer@ettus.com>
* Added NI product IDs for USRP-2945 and USRP-2955vkakade2016-09-202-0/+6
| | | | These are USRP RIO (X310) devices with TwinRX daughter-boards.
* Fix TXCO GPSDO recognitionmichael-west2016-09-081-1/+3
|
* transport: Removed conditional compiles for terminator APIsMartin Braun2016-09-052-4/+0
|
* Merge branch 'UHD-3.9.LTS' into maintMartin Braun2016-09-026-159/+174
|\ | | | | | | | | | | | | | | This provides the GPS fixes. Conflicts: host/CMakeLists.txt tools/debs/upload_debs.sh
| * E100: Simplify GPSDO UART so it does not strip characters.michael-west2016-09-021-2/+0
| |
| * X300: GPSDO fixesmichael-west2016-09-021-19/+17
| | | | | | | | | | - Optimize writes so full 32-bit words are written at a time - Simplify UART so it does not strip or add characters
| * B200: GPSDO fixesmichael-west2016-09-023-20/+12
| | | | | | | | | | | | | | - Fix initialization order - Initialize to proper baud rate divisor - Remove unused function to change baud rate divisor - Simplify UART code so it does not strip or add characters
| * gps_ctrl: Multiple fixesmichael-west2016-09-021-115/+125
| | | | | | | | | | | | | | - Check for updates if cached data is older than one millisecond - Removed timeouts when checking for updated data from UART - Subscribe to SERVO:TRACe message every second and process like NMEA strings - Refactored code for simplification
| * GPSDO: Make sure read_uart() returns only complete strings for all devices.michael-west2016-09-023-15/+29
| |
| * Add thread safety to gps_ctrl cached sensorsmichael-west2016-09-021-0/+3
| |
* | Merge branch 'UHD-3.9.LTS' into maintMartin Braun2016-08-291-6/+11
|\|
| * uhd: error on setting large recv_frame_size fixed #1212Sugandha Gupta2016-08-291-6/+11
| |
* | TwinRX: Fixed missing and redundant writes to FE settingsDerek Kozel2016-08-261-0/+6
| | | | | | | | | | | | TwinRX's Nyquist expert now writes the frontend correction settings on every tune to a new frequency. This guarantees phase alignment when timed commands are used and introduces minimal overhead.
* | Revert "B200: Adding separate B200 radio control code"Martin Braun2016-08-236-424/+12
| | | | | | | | This reverts commit 5d360ab43eca63e3f12f0e5abde5a3186b7f12dc.
* | x300: Bumped FPGA compat num (is now: 0x21 == 33) and FW compat num (is now 5)Martin Braun2016-08-231-2/+2
| | | | | | | | - Also updated images package.
* | Merge branch 'UHD-3.9.LTS' into maintMartin Braun2016-08-221-10/+35
|\|
| * ubx: Added codes for the rev2 and LP versionsMartin Braun2016-08-221-10/+35
| |
| * cores: Fixed typo in time_core_3000Martin Braun2016-08-121-2/+2
| |
| * WBX: Make frequencies <100 MHz work for v2 and v3 boards when reference ↵michael-west2016-08-012-16/+22
| | | | | | | | clock <100 MHz (i.e. on X300)
* | changed clk constant to match new zpu clk changesRyan2016-08-221-1/+1
| |
* | x300: Removed superfluous verbosityMartin Braun2016-08-181-1/+1
| |
* | x300 radio: Fixed typo for frontend regsMartin Braun2016-08-122-2/+2
| |
* | cores: Fixed typo in time_core_3000Martin Braun2016-08-121-2/+2
| |
* | Frontend corrections: Provide new function for RFNoC-based radioNicolas Cuervo2016-08-114-11/+74
| |
* | WBX: Make v2 and v3 boards lock with 50 MHz ref clock (X300 default)michael-west2016-08-112-11/+17
| |
* | multi_usrp: Fixed compiler warning on read_registerMartin Braun2016-08-111-2/+1
| |
* | x300: Fixed typo in check_radio_configMartin Braun2016-08-111-8/+6
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 02:20:12 +0000