aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Collapse)AuthorAgeFilesLines
* Revise calculation of ADF5355 FRAC2 registerMark Meserve2017-02-201-7/+4
| | | | | Corrected residue formula Fixed cast to uint16_t that was behaving differently in msvc14 32-bit vs 64-bit
* C API: Added missing fields to USRP infoMartin Braun2017-02-201-0/+2
|
* uhd: Fix C API LO controlsMartin Braun2017-02-201-4/+4
|
* cores: unhide virtual overloaded functions in gpio_atr_3000Andrej Rode2017-02-201-0/+4
|
* UBX: Add UHD_SAFE_CALL for MAX287x dectructor to prevent terminatemichael-west2017-02-161-1/+5
|
* GPSDO: Improved detectionmichael-west2017-02-011-7/+17
| | | | | - Added re-sending of *IDN? command if no reply or unexpected string (i.e. during GPSDO firmware initialization) - Shortened detection timeout to return sooner if no GPSDO present (faster initialization)
* x300: only remove existing items from zpu_iface_registry in destructorAndrej Rode2017-02-011-1/+3
|
* Moved default register values into ic_reg_mapDerek Kozel2017-01-302-32/+15
|
* GPS: Improvements to query_gpsdo_sensormichael-west2017-01-301-5/+5
| | | | | | | - Reordered operations to make sure setting clock and time sources is first - Reduced delay waiting for ref lock - Added wait for GPSDO warm up - Made warning messages in gps_ctrl function into log messages to prevent unnecessary output
* device3: Reset sequence number in get_tx_streamer()Jonathon Pendlum2017-01-301-0/+1
|
* x300: Increase PCIe TX frame size to 8184Jonathon Pendlum2017-01-261-4/+1
|
* X300: Move property tree check to subscriberDerek Kozel2017-01-261-5/+6
| | | | | Command Time path in the daughterboard does not yet exist during X300 initialization, so check cannot be done while subscribing.
* X300: Fix issue with GPSDO sometimes not being recognized properlymichael-west2017-01-261-10/+23
|
* X300: Added code to handle case where older firmware was slow to release the ↵michael-west2017-01-261-6/+25
| | | | claim causing discovery to fail
* lib: add default ctors to structs and initialize members properlyAndrej Rode2017-01-124-4/+19
|
* lib: remove statements after throwAndrej Rode2017-01-123-3/+1
|
* ad9361: assign before throwAndrej Rode2017-01-121-1/+1
|
* n230: fix coverity reportsAndrej Rode2017-01-121-1/+2
|
* usrp2: fixes according to coverity reportsAndrej Rode2017-01-123-3/+3
|
* docs: Purged references to CVITA, replaced with CHDRMartin Braun2017-01-111-1/+1
|
* X300: Prevent MB EEPROM Corruptionmichael-west2017-01-108-49/+387
| | | | | | | - Load EEPROM data into firmware memory to access from there instead of driving the I2C bus directly - Fixed firmware performance issues by removing the popcntll() function and reducing frequency of background tasks to once every 10ms - Added x300_mb_eeprom_iface to handle cases of devices with older and newer firmware - Added checks for claim to device before driving the I2C bus
* x300: Made MTU throttling more explicit in x300 header filesMartin Braun2016-12-132-1/+3
|
* Fix typo causing channel list generation to fail.michael-west2016-12-131-1/+1
|
* X300: dont stop x300_find if receiving wrong flagsAndrej Rode2016-12-081-2/+2
| | | | | Just skip current receive buffer and do not stop processing udp packets completely.
* x300: Make PCIe muxing and connection multi-usrp capableMartin Braun2016-12-082-15/+19
|
* x300: Adding warning for sampling rate coercionMartin Braun2016-12-061-2/+7
|
* UBX: Force on RX driver to eliminate transientmichael-west2016-12-011-1/+1
|
* rfnoc: legacy_compat gets its own set_{rx,tx}_rate() callsMartin Braun2016-11-291-0/+24
| | | | | | This avoids double-calling subscribers, and will fix the case where a rate change in a multi-channel scenario will break because the graph resolution is done before all rates are set.
* device3: Backed-out the alignment adaptionMartin Braun2016-11-291-6/+0
|
* lib: Removed more superfluous variablesMartin Braun2016-11-284-10/+8
|
* usrp2: Removed superfluous helper functionMartin Braun2016-11-281-4/+0
|
* b100: Removed superfluous FX2 vid/pidMartin Braun2016-11-282-4/+0
|
* dma fifo: Removed superfluous attributeMartin Braun2016-11-281-2/+1
|
* n230: Make second dual-eth addr consistent with standardAshish Chaudhari2016-11-141-2/+2
| | | | - The second address argument was changed from "secondary-addr" to "second_addr"
* Remove all boost:: namespace prefix for uint32_t, int32_t etc. (fixed-width ↵Martin Braun2016-11-08173-2285/+2286
| | | | | | | | types) - Also removes all references to boost/cstdint.hpp and replaces it with stdint.h (The 'correct' replacement would be <cstdint>, but not all of our compilers support that).
* X300: Fix for channel 1 failure to ACK a TX burst.michael-west2016-11-071-24/+60
| | | | | | - Added mapping from radio block and port to channel in legacy compat layer. - Improved parsing of stream args and added parsing of radio ID and port parameters for each channel. - Added proper programming of the response SID based on the new radio ID and port parameters.
* device3: Removed some superfluous includesMartin Braun2016-11-042-12/+1
|
* X300: Check dboard time property before subscribingDerek Kozel2016-11-042-6/+7
| | | | | If a daughterboard does not have a time/cmd property then no subscriber should be added to the motherboard time/cmd property.
* TwinRX: Add rev B daughterboard IDDerek Kozel2016-11-011-0/+9
|
* xcvr: Removed some compiler warningsMartin Braun2016-10-271-1/+1
|
* TwinRX: Remove unhelpful warningDerek Kozel2016-10-261-8/+0
|
* TwinRX: Use command time to schedule synchronous eventsDerek Kozel2016-10-265-6/+104
|
* x300: Throttle MTU to 3000 for PCIe to avoid underrunsMartin Braun2016-10-251-1/+4
| | | | This is a temporary workaround to make PCIe available on lower rates.
* b200: Make sure no GPS settings are applied when no gpsdo present.Martin Braun2016-10-181-1/+4
| | | | | | | This changes the exception message thrown when gpsdo is selected as a clock source, but does not change the exception. Note that before, during its first run, the B2x0 would happily accept gpsdo as a clock source even when none was present.
* Fix warning in e300_remote_codec_ctrl.cpp for gcc.Philip Balister2016-10-181-2/+2
| | | | | | | | The bigger question is why uhd forces the e300 code to have an implementation of an empty function. But, suppress the warning and let people fight about design later. Signed-off-by: Philip Balister <philip@opensdr.com>
* x300: Add time sync procedure to device initializationMartin Braun2016-10-131-1/+9
| | | | Reviewed-By: Derek Kozel <derek.kozel@ettus.com>
* UBX: changed default performance parametersNicolas Cuervo2016-10-071-5/+5
|
* UHD: Fixed the max link warning for the case where there are multiple ↵Paul David2016-10-051-0/+2
| | | | motherboards
* max2871: Added label for the bit region VAS_DLYPaul David2016-10-051-0/+7
| | | | - Also added a template specialization for enabling the VAS_DLY bit locations based on VAS_TEMP setting (aka retune)
* bugfix: TwinRX: Use correct LEDs when mapping chan -> antAshish Chaudhari2016-09-302-23/+30
| | | | | | | | | - Added LED controller objects for each block port in radio - Added desired subscribers for each frontend's antenna property that updates LED ATR values Reviewed-By: Martin Braun <martin.braun@ettus.com> Reviewed-By: Marcus Müller <marcus.mueller@ettus.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 04:38:51 +0000