aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Expand)AuthorAgeFilesLines
...
* multi_usrp: Add sync_source APIMartin Braun2018-10-111-6/+160
* mpmd: Increase rpcc timeout when calling set_time_source()Trung Tran2018-10-111-0/+2
* mg: fixup set_rx_antennaTrung Tran2018-10-041-1/+1
* multi_usrp: move definition of constantsAndrew Lynch2018-10-041-0/+2
* cores: Update rx_frontend_gen3.v controls for 1/4-rate mixerMartin Braun2018-09-252-8/+12
* e320: Fix master_clock_rate settingSugandha Gupta2018-09-241-0/+4
* uhd: rfnoc: add async message handlerTrung Tran2018-09-141-2/+29
* mg: clipping frequencyTrung Tran2018-09-142-4/+7
* x300_impl: remove default_buff_args propertiesTrung Tran2018-09-131-7/+0
* device3_io_impl: remove tx_hint[send_buff_size]Trung Tran2018-09-131-6/+0
* mpmd: add link speed to xport udpTrung Tran2018-09-131-6/+29
* fixup! DDC/DUC: switch CORDIC -> DDS for all relevant variable namesmichael-west2018-09-132-12/+12
* e320: gpio: Fix front panel GPIO readbackSugandha Gupta2018-09-121-1/+4
* mpmd: add option to enum rfnoc blocks from argsTrung Tran2018-08-311-5/+21
* x300: Improve firmware compat error messageMartin Braun2018-08-222-16/+35
* X300: Correctly initialize antenna mapping for TwinRXDerek Kozel2018-08-221-1/+4
* twinrx: enable ch1 lo amps if ch2 is using an external lo sourceMark Meserve2018-08-211-1/+13
* uhd: Remove usage of time_t (except when required)Martin Braun2018-08-203-8/+8
* multi_usrp: Add get_user_settings_iface() API callMartin Braun2018-08-161-0/+12
* b200: Enable access to user regs via the 'enable_user_regs' argMartin Braun2018-08-163-4/+31
* b200: Remove superfluous fake lambdaMartin Braun2018-08-161-11/+10
* x300: Enable clock_source and time_source device argsMartin Braun2018-08-101-2/+2
* x300: Use constrained_argsMartin Braun2018-08-104-48/+222
* x300: Move defaults to their own headerMartin Braun2018-08-103-116/+159
* e320: Fix tx/rx atr - antenna and frequency settingsSugandha Gupta2018-08-095-30/+32
* fixup! mpm: mg: add set_master_clock_rate memberMartin Braun2018-08-031-2/+2
* rfnoc: dma_fifo: Added a more robust flush mechanismAshish Chaudhari2018-08-031-35/+59
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
* mpmd: Allow setting time_source and clock_source propsMartin Braun2018-08-021-24/+4
* x300: Log git hash and compat number as debug messageMartin Braun2018-08-011-3/+8
* b100: Demote some clocking-related log messages to traceMartin Braun2018-07-311-2/+2
* b100: Remove all Boostisms from fifo_ctrl_excelsiorMartin Braun2018-07-311-9/+9
* b100: Fix fifo_ctrl_excelsior not exitingMartin Braun2018-07-311-13/+2
* b100: Move fifo_ctrl_excelsior to b100 subdirMartin Braun2018-07-315-2/+53
* lmx2592: fix calibration start during tuningMark Meserve2018-07-311-1/+3
* lmx2592: always mux lock detect after initMark Meserve2018-07-311-9/+5
* mpmd: Parallelize broadcast-findingMartin Braun2018-07-311-2/+11
* X300: Change Ethernet bufferingMichael West2018-07-255-290/+285
* Device3: Constrain send_buff_sizeMichael West2018-07-251-6/+12
* X300: Reduce Ethernet frame size to 4000michael-west2018-07-252-6/+5
* Device3: Change packet-based flow control to byte-based flow controlMartin Braun2018-07-254-296/+489
* rfnoc: Enabled SW flush mechanism impl'd in noc_shellAshish Chaudhari2018-07-241-2/+4
* C API: Fix incorrectly declared lockMartin Braun2018-07-231-1/+1
* n230: Fix incorrectly declared locksMartin Braun2018-07-231-3/+5
* x300: Fix incorrectly declared locksMartin Braun2018-07-232-5/+5
* mpmd: Add set_timeout_init() API call to mpmd_mboard_implMartin Braun2018-07-182-2/+11
* fixup! uhd: Warn when tuning with auto DSP frequency and an external LOBrent Stapleton2018-07-181-1/+3
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-1814-12/+1874
* mpm: initial commit of E320 codeBrent Stapleton2018-07-181-0/+15
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 12:26:45 +0000