aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Collapse)AuthorAgeFilesLines
* mpmd: increase claim_rpc call timeout.Trung Tran2019-01-142-3/+6
| | | | | | | | | | | During certain RPC calls (e.g. update_component), the MPM RPC server is slow to respond to reclaim requests, which can causes RPC timeouts. These changes fix those timeouts. By setting the reclaiming timeout to twice the timeout of an RPC call, we have some margin for error on the host side, while not affecting the underlying claiming logic in MPM. The loop should still operate on a 5 second period, but now has more leeway during stressful conditions.
* rpc,mpmd: replace all set_timeout() to new apiTrung Tran2019-01-143-53/+11
| | | | | Using new rpc client new API that ensure atomic setting of timeout on each rpc call.
* mpmd_impl: move timeout constants to headerTrung Tran2019-01-142-9/+13
|
* tests: Add benchmark of streaming code pathsCiro Nishiguchi2019-01-101-0/+4
| | | | | Add a benchmark of packet handlers and device3 flow control. Benchmarks use mock transport objects.
* uhd: Move device3 flow control functions to header for benchmarkCiro Nishiguchi2019-01-102-291/+306
| | | | | Moving device3 flow control functions to a header file so they can be included in benchmark utility.
* rh: add support for identify argMark Meserve2019-01-102-12/+40
|
* rh: implement set_rateMark Meserve2019-01-103-9/+40
|
* rh: general code cleanupMark Meserve2019-01-101-4/+5
| | | | | | | | - Add default bandwidth range - Add default mash order constant - Delete MPM todos - Cleanup whitespace in MPM python code - Add docstring for is_lo_dist_present
* rh: add support for iq and dc correction filesMark Meserve2019-01-094-18/+88
| | | | | | | - Update corrections on frequency or LO source change - Add legacy EEPROM properties - Move DSP control initialization earlier - Fix TX antenna list property
* rh: adjust frequencies for lo filter bankMark Meserve2019-01-081-1/+1
| | | | | - Moves the cutover frequency for the 900 MHz LO filter from 900 to 975 MHz. This fixes an image issue in TX when transmitting near 325 MHz or 900 MHz.
* b200: Fix compiler warnings related to type conversionsMartin Braun2019-01-072-8/+8
| | | | | | | These compiler warnings mostly pop up on MSVC. Most of them are due to inconsistent usage of size_t, uint{8,16,32}_t, and even int. This commit changes types mostly such that variables have the correct type to begin with, although it also contains a few explicit type-casts.
* x300: Fix compiler warnings related to type conversionsMartin Braun2019-01-074-15/+15
| | | | | | | These compiler warnings mostly pop up on MSVC. Most of them are due to inconsistent usage of size_t, uint{8,16,32}_t, and even int. This commit changes types mostly such that variables have the correct type to begin with, although it also contains a few explicit type-casts.
* TwinRX: Fix tuningMichael West2019-01-021-1/+1
| | | | | - Set SPI clock back to 3 MHz - Fix returned frequency for ADF5355 (rev A and B boards)
* x300: Remove usage of boost::bindMartin Braun2019-01-021-12/+16
|
* x300: Factor our PID -> MB type and MB type -> product name mappingMartin Braun2019-01-021-137/+117
|
* x300: Remove some trailing spacesMartin Braun2019-01-021-6/+4
|
* E300: Re-enable "gpsdo" time sourcemichael-west2018-12-201-1/+1
| | | | Fixed typo in CMakeLists.txt file
* gpsd: GPGGA string formatting fixesBen Kempke2018-12-201-4/+4
| | | | | - Add missing commas for empty fields - Zeroize longitude and latitude
* N310 E320: Add initialization of TX bandwidthmichael-west2018-12-192-2/+2
| | | | - Fixes "Error: map::at" errors (during calls to get_tx_bandwidth())
* uhd/mpm: eiscat: Various changesRyan Marlow2018-12-192-28/+219
| | | | | | | | | | | | | | - correct lmk initialization parameters - adding missing parameters and consts wrt clock synchronization. - fixed default master clock rate - eiscat, ddc: update xml. - remove references to CORDIC_FREQ in ddc_eiscat - update readback reg addr in radio_eiscat - set default spp from 3992 to 3968. - updated jesd mode sequence initialization - updating eiscat_radio_ctrl_impl - add rx_codecs to property tree to display correct ADC chip. - updated issue_stream_cmd
* E310: Fix initialization of antenna and frequency valuesmichael-west2018-12-172-8/+36
|
* C API: Add support for Tx LO controlMartin Braun2018-12-141-0/+89
| | | | | The Rx LO control was always there, but the Tx LO control was not exposed into the C API.
* x300: Add support for USRP-2974Thomas Vogel2018-12-143-2/+19
| | | | | This will enable a USRP 2974 to be registered as an X300 device. Its product ID is 'NI-2974'.
* various: use "std::abs" instead of "std::fabs"Michael Dickens2018-12-122-6/+6
| | | | | | + better compiler compatibility + let the compiler figure out the actual function IO signature that makes sense, instead of forcing float.
* lmx2592: Better "abs()" compiler compatibilityMichael Dickens2018-12-121-3/+3
| | | | Use "std::abs" instead of "abs" for better compiler compatibility
* rh: add highband spur reduction optionMark Meserve2018-12-124-4/+83
| | | | | | | | | - When highband_spur_reduction is enabled, the lowband LO will be disabled during highband operation. This improves spur performance, but also renders timed tune commands unusable due to the MPM call. - A warning is logged if the user uses a timed tune command that would change the state of the lowband LO, as the MPM call will occur immediately instead of at the given command time.
* TwinRX: Make routing to LO1 and LO2 mutually exclusivemichael-west2018-12-102-25/+15
|
* TwinRX: Tuning improvementsmichael-west2018-12-102-7/+12
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* uhd: Fix log statement for Port number on RFNOC blockSugandha Gupta2018-12-051-1/+1
| | | | | CE is display in decimal format and Port number will be displayed in Hex, as it represents Block Port on the crossbar
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* python: Add sync source to Python APIBrent Stapleton2018-11-291-0/+32
| | | | Exposing getters, setters, and options for multi_usrp sync source.
* e300: Type-cast fix for boostAndreas Müller2018-11-281-1/+1
| | | | | | | Fixes compiler errors on newer Boost. boost::posix_time::microseconds() requires a int64_t. Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
* x3xx: implement rfnoc get antenna functionsMark Meserve2018-11-262-0/+16
|
* x300: fixup minimum master clock rateBrent Stapleton2018-11-211-1/+1
| | | | | Recent clocking changes set the minimum master clock rate to 187.5MHz, instead of the actual 184.32MHz. This change corrects that.
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* mpmd: add fpga_vesion_hash infoTrung Tran2018-11-161-0/+2
|
* mpmd: Improve error message for compat number mismatchesMartin Braun2018-11-161-6/+14
|
* x300: New mode to configure master clock rateScott Torborg2018-11-163-10/+104
| | | | | | | | Add a new clocking mode to automatically configure arbitrary master clock rates. Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com>
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* uhd: Add device arg to enable dual ethernet for txCiro Nishiguchi2018-11-142-2/+17
| | | | | | | | UHD currently only uses a single ethernet link for tx data, even if the device is initialized with dual 10GbE links. Using both links when a DMA FIFO is present causes sequence errors due to DMA FIFO bandwidth limitations. This maintains the current default behavior but allows users to override it through a device arg "enable_tx_dual_eth".
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-1416-63/+63
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* mpmd: increase rpc timeout during reading mb sensorTrung Tran2018-11-131-1/+4
| | | | | | | Reading motherboard sensor, sometimes, takes more than 2 seconds. We don't have asynchronous RPC, increase this timeout will help long sensor reading such as reading GPSD value when GPSD connection is unreliable.
* rh: initialize switchesMark Meserve2018-11-071-3/+10
|
* x300: Remove 120 MHz optionMartin Braun2018-11-072-3/+1
| | | | | None of our FPGA images support a 120 MHz master clock rate, so the UHD code should match that.
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
| | | | - Improves performance for frequencies greater than 3.5 GHz
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
| | | | | | | | | - This is a combination of 5 commits. - rh: add lo distribution board gpio expander - rh: add lo distribution mpm functions - rh: add code to conditionally initialize lo distribution - rh: change empty i2c device from exception to assertion - rh: add lo distribution board control
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 20:47:47 +0000