| Commit message (Expand) | Author | Age | Files | Lines |
* | usrp-e100: removed stdio prints from implementation | Josh Blum | 2011-05-04 | 7 | -80/+86 |
* | uhd: replaced warning post with calls to UHD_MSG(warning) | Josh Blum | 2011-05-04 | 14 | -90/+55 |
* | uhd: replaced many conditional prints with UHD_LOG usage | Josh Blum | 2011-05-04 | 2 | -13/+11 |
* | usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often) | Josh Blum | 2011-05-04 | 8 | -83/+68 |
* | usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock config | Josh Blum | 2011-05-03 | 1 | -15/+23 |
* | Added RSSI sensor for RFX series (not rfx400) | Jason Abele | 2011-05-02 | 1 | -6/+29 |
* | usrp1: toggle the FPGA reset and RX reset registers at init | Josh Blum | 2011-05-01 | 1 | -8/+18 |
* | usrp-e100: shrink name field to git mcr into eeprom | Josh Blum | 2011-04-20 | 1 | -2/+3 |
* | USRP1: added support for setting clock rate from EEPROM | Josh Blum | 2011-05-01 | 4 | -8/+56 |
* | usrp-e100: add ability to set/get default master clock rate from EEPROM | Josh Blum | 2011-05-01 | 3 | -1/+47 |
* | uhd: fixed typo in tune request/result inter_freq -> rf_freq | Josh Blum | 2011-05-01 | 1 | -13/+13 |
* | usrp2: use default mtu as upper limit unless user specifies | Josh Blum | 2011-04-30 | 1 | -11/+12 |
* | usrp2: allow devices to be discovered when usrp2_iface::make throws | Josh Blum | 2011-04-29 | 1 | -12/+16 |
* | usrp2: added support for GPSDO configuration bits in EEPROM | Josh Blum | 2011-04-29 | 2 | -5/+38 |
* | GPS parser fixes for get_time. | Nick Foster | 2011-04-29 | 2 | -7/+5 |
* | USRP2: enable GPS by default | Nick Foster | 2011-04-29 | 1 | -3/+3 |
* | USRP2: Added GPS time support to the sensors interface. gps_time sensor retur... | Nick Foster | 2011-04-29 | 2 | -1/+9 |
* | N210: implemented mboard sensors for ref lock and MIMO lock | Nick Foster | 2011-04-29 | 4 | -1/+28 |
* | dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better error | Josh Blum | 2011-04-28 | 1 | -1/+5 |
* | usrp_e100: added recv/send_frame_size xport args | Josh Blum | 2011-04-16 | 3 | -11/+23 |
* | rfx: reverted change, now prefer R divider to clock divider | Josh Blum | 2011-04-16 | 1 | -22/+17 |
* | usrp1: fix for tx under remainder conditions | Josh Blum | 2011-04-27 | 1 | -3/+3 |
* | usrp1: the rx mux was reversed (fixed multi-channel rx) | Josh Blum | 2011-04-27 | 1 | -1/+1 |
* | Merge branch 'gdb_support' | Josh Blum | 2011-04-26 | 12 | -278/+592 |
|\ |
|
| * | Enhance WBX IQ balance performance through LO drive | Josh Blum | 2011-04-26 | 1 | -0/+29 |
| * | wbx: split wbx into daughterboard and granddaughterboard implementation | Josh Blum | 2011-04-26 | 4 | -196/+398 |
| * | usrp: support for grand daughter board eeprom | Josh Blum | 2011-04-26 | 6 | -6/+41 |
| * | usrp: work on dboard_manager to register an ID for multiple xcvr combinations | Josh Blum | 2011-04-26 | 1 | -75/+123 |
* | | Merge branch 'sbx-adi' | Josh Blum | 2011-04-26 | 2 | -0/+794 |
|\ \ |
|
| * | | Handle antenna switching and LEDs | Jason Abele | 2011-04-23 | 1 | -36/+120 |
| * | | SBX enable LO LPF at 1.5GHz | Jason Abele | 2011-04-23 | 1 | -12/+31 |
| * | | Makes 2nd SBX proto work | Jason Abele | 2011-04-23 | 1 | -32/+47 |
| * | | Updating SBX to latest UHD | Jason Abele | 2011-04-23 | 1 | -15/+47 |
| * | | Capture characterization changes | Jason Abele | 2011-04-23 | 1 | -6/+6 |
| * | | Initial SBX-ADI driver | Jason Abele | 2011-04-23 | 2 | -0/+644 |
| |/ |
|
* / | xcvr2450: initialize the max_power variable | Josh Blum | 2011-04-26 | 1 | -1/+1 |
|/ |
|
* | uhd: move thread loop condition flag to before barrier (prevents race condition) | Josh Blum | 2011-04-22 | 2 | -2/+2 |
* | Merge branch 'usrp2/discover_with_old_fw' | Josh Blum | 2011-04-19 | 3 | -38/+81 |
|\ |
|
| * | usrp2: improve the compatibility error messages | Josh Blum | 2011-04-19 | 2 | -8/+7 |
| * | usrp2: use the firmware's discovered compat number | Josh Blum | 2011-04-13 | 1 | -4/+16 |
| * | usrp2: add check for holler protocol, we can support backwards | Josh Blum | 2011-04-13 | 2 | -15/+29 |
| * | usrp2: support fw protos with older compats for various parts | Josh Blum | 2011-04-08 | 2 | -20/+38 |
* | | rfx: changes to pick from the dboard clock rates and use R=1 | Josh Blum | 2011-04-18 | 1 | -17/+22 |
* | | Updated documentation and improved XCVR RSSI calculation | Jason Abele | 2011-04-14 | 1 | -2/+11 |
* | | usrp-e100: reset dboard clocks on rate change, and dont cache in dboard iface | Josh Blum | 2011-04-07 | 3 | -4/+32 |
|/ |
|
* | uhd: define LINUX in build system to simplify some checks | Josh Blum | 2011-04-01 | 1 | -5/+1 |
* | Merge branch 'use_boost_barrier' | Josh Blum | 2011-04-01 | 3 | -24/+31 |
|\ |
|
| * | uhd: implemented boost barriers on all code that creates threads | Josh Blum | 2011-03-31 | 3 | -24/+31 |
* | | Merge branch 'rfx400_tx' | Josh Blum | 2011-04-01 | 1 | -3/+6 |
|\ \ |
|
| * | | Correct RFX400 div2 logic, makes RFX400 TX work | Jason Abele | 2011-03-31 | 1 | -3/+6 |