aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Expand)AuthorAgeFilesLines
...
| * USRP2: enable GPS by defaultNick Foster2011-04-291-3/+3
| * USRP2: Added GPS time support to the sensors interface. gps_time sensor retur...Nick Foster2011-04-292-1/+9
| * N210: implemented mboard sensors for ref lock and MIMO lockNick Foster2011-04-294-1/+28
| * dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better errorJosh Blum2011-04-281-1/+5
| * usrp_e100: added recv/send_frame_size xport argsJosh Blum2011-04-163-11/+23
| * rfx: reverted change, now prefer R divider to clock dividerJosh Blum2011-04-161-22/+17
| * usrp1: fix for tx under remainder conditionsJosh Blum2011-04-271-3/+3
| * usrp1: the rx mux was reversed (fixed multi-channel rx)Josh Blum2011-04-271-1/+1
| * Merge branch 'gdb_support'Josh Blum2011-04-2612-278/+592
| |\
| | * Enhance WBX IQ balance performance through LO driveJosh Blum2011-04-261-0/+29
| | * wbx: split wbx into daughterboard and granddaughterboard implementationJosh Blum2011-04-264-196/+398
| | * usrp: support for grand daughter board eepromJosh Blum2011-04-266-6/+41
| | * usrp: work on dboard_manager to register an ID for multiple xcvr combinationsJosh Blum2011-04-261-75/+123
| * | Merge branch 'sbx-adi'Josh Blum2011-04-262-0/+794
| |\ \
| | * | Handle antenna switching and LEDsJason Abele2011-04-231-36/+120
| | * | SBX enable LO LPF at 1.5GHzJason Abele2011-04-231-12/+31
| | * | Makes 2nd SBX proto workJason Abele2011-04-231-32/+47
| | * | Updating SBX to latest UHDJason Abele2011-04-231-15/+47
| | * | Capture characterization changesJason Abele2011-04-231-6/+6
| | * | Initial SBX-ADI driverJason Abele2011-04-232-0/+644
| | |/
| * / xcvr2450: initialize the max_power variableJosh Blum2011-04-261-1/+1
| |/
| * uhd: move thread loop condition flag to before barrier (prevents race condition)Josh Blum2011-04-222-2/+2
* | Merge branch 'master' into nextJosh Blum2011-04-1932-180/+284
|\|
| * Merge branch 'usrp2/discover_with_old_fw'Josh Blum2011-04-193-38/+81
| |\
| | * usrp2: improve the compatibility error messagesJosh Blum2011-04-192-8/+7
| | * usrp2: use the firmware's discovered compat numberJosh Blum2011-04-131-4/+16
| | * usrp2: add check for holler protocol, we can support backwardsJosh Blum2011-04-132-15/+29
| | * usrp2: support fw protos with older compats for various partsJosh Blum2011-04-082-20/+38
| * | rfx: changes to pick from the dboard clock rates and use R=1Josh Blum2011-04-181-17/+22
| * | Updated documentation and improved XCVR RSSI calculationJason Abele2011-04-141-2/+11
| * | usrp-e100: reset dboard clocks on rate change, and dont cache in dboard ifaceJosh Blum2011-04-073-4/+32
| |/
| * uhd: define LINUX in build system to simplify some checksJosh Blum2011-04-011-5/+1
| * Merge branch 'use_boost_barrier'Josh Blum2011-04-013-24/+31
| |\
| | * uhd: implemented boost barriers on all code that creates threadsJosh Blum2011-03-313-24/+31
| * | Merge branch 'rfx400_tx'Josh Blum2011-04-011-3/+6
| |\ \
| | * | Correct RFX400 div2 logic, makes RFX400 TX workJason Abele2011-03-311-3/+6
| * | | usrp1: fixed codec ctrl aux adc read (didnt start conversions) + cleaned-up l...Josh Blum2011-03-301-44/+29
| * | | usrp1: switch usrp1 iface to use spi read (transact never worked)Josh Blum2011-03-301-17/+29
| | |/ | |/|
| * | usrp1: ignore claimed interfaces, avoids the problem of discovery when one de...Josh Blum2011-03-291-2/+10
| |/
| * usrp-e100: set the ticks-per-second every time we change clock rateJosh Blum2011-03-292-5/+1
| * uhd: update copyright headers with automated scriptJosh Blum2011-03-2315-15/+15
| * usrp-e100: added module compat num check, made fpga compat constant more obviousJosh Blum2011-03-113-6/+15
| * usrp2: use the discovered mtu to clip the user specified mtuJosh Blum2011-03-211-8/+11
| * usrp-e100: reinstate the VCO calibration timeout messageJosh Blum2011-03-061-3/+0
| * usrp-e100: disabling VCO cal check, its not right, and the warning alarms peopleJosh Blum2011-03-051-0/+3
| * Merge branch 'boost_fs_string' into nextJosh Blum2011-03-171-1/+1
| |\
| | * uhd: replace file_string() with string() for deprecation reasonsJosh Blum2011-03-151-1/+1
| * | Merge branch 'master' into nextJosh Blum2011-03-171-1/+1
| |\ \
| | * | E100: fix test clock output enableNick Foster2011-03-161-1/+1
| | |/
* | | usrp2: increment fpga and fw compat numbersJosh Blum2011-03-171-2/+2
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 12:10:20 +0000