aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/usrp1
Commit message (Expand)AuthorAgeFilesLines
...
* Removed USRP1 firmware path debug messagesNick Foster2010-08-311-2/+2
* Added serial number read. Renamed the usrp1-specific utilities.Nick Foster2010-08-311-0/+15
* Added usrp_serial_burner.cpp and capabilities for setting serial number in mb...Nick Foster2010-08-311-2/+10
* Merge branch 'usrp1' of ettus.sourcerepo.com:ettus/uhdpriv into usrp1Nick Foster2010-08-313-8/+24
|\
| * usrp1: tested dbsrx, works with lower dividerJosh Blum2010-08-311-3/+3
| * usrp1: Fedora sdcc note and change fw error to warning (find should not error)Josh Blum2010-08-311-3/+14
| * usrp1: flush for flow error messagesJosh Blum2010-08-311-2/+2
| * usrp1: init the subdev specs so they will be non-emptyJosh Blum2010-08-301-0/+5
| * usrp1: work on gpio clock divider for dbsrx, still not lockingJosh Blum2010-08-301-6/+6
* | EEPROM burning in UHD. Changed some USB device handle stuff. Added usrp_init_...Nick Foster2010-08-315-28/+132
|/
* usrp1: Read capabilities registerThomas Tsou2010-08-271-0/+40
* usrp1: Don't flush the stream buffer after every overrun/underrunThomas Tsou2010-08-271-2/+2
* usrp1: Wait for USB device renumeration only when necessaryThomas Tsou2010-08-272-3/+4
* usrp1: Disable i2c error messages unless debug is enabledThomas Tsou2010-08-271-2/+4
* usrp1: Disable default codec debug outputThomas Tsou2010-08-271-1/+1
* Merge branch 'usrp1_cleanup' into usrp1Thomas Tsou2010-08-273-64/+41
|\
| * usrp1: Add missing include for fpga registersThomas Tsou2010-08-271-0/+1
| * usrp1: Fix DDC rate storage value and comments for multiple channel supportThomas Tsou2010-08-271-4/+14
| * usrp1: Clean up initialization sequence of fpga registersThomas Tsou2010-08-271-59/+18
| * usrp1: Fix fpga load issue by increasing delay after firmware loadThomas Tsou2010-08-271-1/+1
| * usrp1: Add TODO commentsThomas Tsou2010-08-271-1/+8
* | usrp1: handle special dbsrx clocking caseJosh Blum2010-08-265-130/+55
|/
* usrp1: cast enum to char before printing as %cJosh Blum2010-08-262-4/+4
* usrp1: swapped the mux values to account for the convert types routinesJosh Blum2010-08-261-17/+46
* usrp1: codec pga gain control fixJosh Blum2010-08-261-14/+14
* usrp1: Fill in missing dboard interface with an empty callThomas Tsou2010-08-261-0/+6
* Merge branch 'usrp1_next' into usrp1Thomas Tsou2010-08-269-268/+354
|\
| * usrp1: Modifiy USB transport implementations to use new interfaceThomas Tsou2010-08-261-16/+21
| * usrp1: Remove unused overrun/underrun poll variableThomas Tsou2010-08-241-2/+0
| * usrp1: Cleanup unnecessary state variablesThomas Tsou2010-08-241-12/+22
| * usrp1: Improve debug output readabilityThomas Tsou2010-08-241-1/+2
| * usrp1: Fix assertion that prevents 32-bit SPI transactionsThomas Tsou2010-08-231-1/+1
| * usrp1: Remove hard coded value in clock rate propertyThomas Tsou2010-08-231-1/+1
| * usrp1: Refactor I/O implementationThomas Tsou2010-08-233-130/+215
| * usrp1: Fix bug in calculating transmit muxThomas Tsou2010-08-231-1/+1
| * usrp1: Change codec transmit gain scalingThomas Tsou2010-08-191-2/+2
| * usrp1: Make underrun/overrun checking rate dependentThomas Tsou2010-08-191-10/+22
| * usrp1: Remove codec gain TODO commentsThomas Tsou2010-08-191-3/+3
| * usrp1: Return proper mboard proxyThomas Tsou2010-08-181-2/+2
| * usrp1: Refactor mboard tuning codeThomas Tsou2010-08-184-114/+92
| * usrp1: Return unknown (0xff) on invalid I2C readThomas Tsou2010-08-171-5/+2
* | usrp1: images for usrp1, makefile checks for image generation dependenciesJosh Blum2010-08-192-17/+23
|/
* Merge branch 'usrp1_next' of ettus.sourcerepo.com:ettus/uhdpriv into usrp1_nextThomas Tsou2010-08-161-7/+106
|\
| * usrp1: rx and tx mux calculationJosh Blum2010-08-161-7/+106
* | usrp1: Remove hard coded clock valuesThomas Tsou2010-08-162-6/+6
* | usrp1: Remove error message for unsupported ATR registersThomas Tsou2010-08-161-4/+2
* | usrp1: Setup dboard interface dualityThomas Tsou2010-08-161-42/+63
|/
* usrp1: compiling with the latest nextJosh Blum2010-08-163-13/+19
* usrp1: add skeleton code for setting subdev specJosh Blum2010-08-153-3/+35
* usrp1: created daughterboard dualityJosh Blum2010-08-159-183/+246