aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/dboard
Commit message (Collapse)AuthorAgeFilesLines
...
* n310: Fix GPIO registersMartin Braun2019-11-261-3/+6
| | | | | This enables the use of the dboard and FP GPIOs. The problem was that the register offset of 8 was not encoded.
* mg/rh/rfnoc: Harmonize peripheral registersMartin Braun2019-11-263-18/+29
| | | | | - Move the SPI addresses out of radio_control_impl - Fix the GPIO address spaces for N310/N300
* e310: Fix issues in MPM and UHDMartin Braun2019-11-261-7/+3
| | | | | | | | | | | - Remove superfluous INFO logging - Improve formatting in many places - Improve Pylint score in various places - Add tear_down to DB object - Simplify custom EEPROM code for E310 - Fix time source selection code - Remove references to GPS_CTRL and GPS_STATUS (are E320 only) - Move clock source control out of MboardRegs object
* uhd: Remove all usages of boost::tuple and friendsMartin Braun2019-11-261-3/+3
| | | | | | | | | | | | | This replaces all of the following with standard C++ features: - boost::tuple - boost::make_tuple - boost::tuple::get - #include <boost/tuple/tuple.hpp> All usages were replaced with search-and-replace scripts (the usages of get could be automatically replaced with a vim macro, the rest was straightforward search-and-replace).
* uhd: Replace all occurrences of boost::bind with std::bindMartin Braun2019-11-2618-169/+177
| | | | | | | | | | | | | | | | | | | | | Note: Replacing everything with a lambda would be even better, but that can't be easily scripted so we'll do this as a first step to reduce the Boost footprint. This also removes occurences of #include <boost/bind.hpp>, and makes sure all usages of std::bind have an #include <functional>. clang-format wasn't always applied to minimize the changeset in this commit, however, it was applied to the blocks of #includes. Due to conflicts with other Boost libraries, the placeholders _1, _2, etc. could not be directly used, but had to be explicitly called out (as std::placeholders::_1, etc.). This makes the use of std::bind even uglier, which serves as another reminder that using std::bind (and even more so, boost::bind) should be avoided. nirio/rpc/rpc_client.cpp still contains a reference to boost::bind. It was not possible to remove it by simply doing a search and replace, so it will be removed in a separate commit.
* uhd: Replace usage of boost smart pointers with C++11 counterpartsMartin Braun2019-11-2610-19/+21
| | | | | | | | | | | | | | | | | | | This removes the following Boost constructs: - boost::shared_ptr, boost::weak_ptr - boost::enable_shared_from_this - boost::static_pointer_cast, boost::dynamic_pointer_cast The appropriate includes were also removed. All C++11 versions of these require #include <memory>. Note that the stdlib and Boost versions have the exact same syntax, they only differ in the namespace (boost vs. std). The modifications were all done using sed, with the exception of boost::scoped_ptr, which was replaced by std::unique_ptr. References to boost::smart_ptr were also removed. boost::intrusive_ptr is not removed in this commit, since it does not have a 1:1 mapping to a C++11 construct.
* Remove proto-RFNoC filesMartin Braun2019-11-2610-1269/+1
| | | | | | | This commit removes all files and parts of files that are used by proto-RFNoC only. uhd: Fix include CMakeLists.txt, add missing files
* x300/mpmd: Port all RFNoC devices to the new RFNoC frameworkMartin Braun2019-11-2639-5923/+5956
| | | | | | | Co-Authored-By: Alex Williams <alex.williams@ni.com> Co-Authored-By: Sugandha Gupta <sugandha.gupta@ettus.com> Co-Authored-By: Brent Stapleton <brent.stapleton@ettus.com> Co-Authored-By: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
* twinrx: Make gpio_iface a wb_iface (was: timed_wb_iface)Martin Braun2019-11-261-11/+2
| | | | | This completely eliminates the need for cmd_time_ctrl in the TwinRX codebase, reducing the number of dependencies on the X300 codebase.
* rfx: Fix calculation of prescaler and band selectMartin Braun2019-11-221-15/+22
| | | | | | | | | | | | | | The code was broken when converting from BOOST_FOREACH to a range-based for loop. Without this fix, the board initialization would crash with an error like this: [ERROR] [DBMGR] The daughterboard manager encountered a recoverable error in init. Loading the "unknown" daughterboard implementations to continue. The daughterboard cannot operate until this error is resolved. LookupError: KeyError: key "0" not found in dict(i, N14adf4360_regs_t17prescaler_value_tE)
* e31x: Remove spurious debug logsMartin Braun2019-11-211-7/+5
| | | | | This demotes INFO logs to TRACE that relate to the switch settings during tuning.
* rh: Add missing includes in rhodium_cpld_ctrl.hppMartin Braun2019-10-111-2/+4
|
* n320: updated rhodium dboard mcr initializationnitest2019-10-101-1/+2
| | | | | db0 is used as the master for driving the radio path and must be the dboard used to set the master clock rate.
* mg: Allow for timeout on retuneMartin Braun2019-08-223-1/+19
| | | | set_freq() calls now have a 15 seconds timeout.
* n310: add capability to control RF filter bypass and freq.band limitsThomas Vogel2019-07-246-39/+133
| | | | | | | | | | | | | | | | | | With the keywords "rx_gain_profile", "tx_gain_profile" and the new values "default_bypass_always_off" and "default_bypass_always_on" the customer can control whether the filter bypass shall be applied as defined in the gain-table or whether to switch the bypass to ON or OFF for all gains. With the keywords "rx_band_map" and "tx_band_map" the user can define custom frequency borders for the band mapping. These new keywords can be used in the uhd.con, e.g.: [type=n3xx] rx_gain_profile=default_bypass_always_off tx_gain_profile=default_bypass_always_on rx_band_map=431e6;601e6;1051e6;1601e6;2101e6;2701e6 tx_band_map=723.18e6;1623.18e6;3323.18e6
* sbx: Only update ATRs when lock state changesMartin Braun2019-07-171-5/+7
| | | | | | | The SBX tracks the LO lock state via on-board LEDs. However, querying the LO lock status spawns an update to the entire ATR registers. To reduce the number of register reads/writes, the LO lock status LED is now only updated if it changed.
* ubx: add temperature compensation modeMark Meserve2019-06-121-0/+41
| | | | | | | - This mode defaults to "disabled" (no change from current behavior) - Enabling this mode fixes some instances where the MAX287x would fail to lock when in integer-n mode - Enabling this mode increases the maximum lock time to up to 100ms
* twinrx: increase rev c lo1 charge pump default valueMark Meserve2019-05-281-1/+1
| | | | - This change improves spur performance for the Rev C TwinRX daughterboard
* cmake: Remove superfluous "E300/E320 enabled" messagesMartin Braun2019-05-161-2/+0
|
* twinrx: set lo2 to use new low spur tuning modeMark Meserve2019-05-072-6/+3
|
* twinrx: add lo charge pump propertiesMark Meserve2019-05-025-19/+116
|
* e310/e320: Move E310 to MPM architecture and refactorSugandha Gupta2019-05-0119-877/+1484
| | | | | | | | | | | | - Turns the E310 into an MPM device (like N3xx, E320) - Factor out common code between E320 and E310, maximize sharing between the two devices - Remove all pre-MPM E310 code that is no longer needed - Modify MPM to remove all existing overlays before applying new ones (this is necessary to enable idle image mode for E310) Co-authored-by: Virendra Kakade <virendra.kakade@ni.com> Signed-off-by: Virendra Kakade <virendra.kakade@ni.com>
* uhd: mpm: update all license header w/ "-or-later"Brent Stapleton2019-03-082-2/+2
| | | | Updating all SPDX license identifiers to include "-or-later"
* rh: Fix typo in setting up RX frontendAlex Williams2019-02-271-1/+1
| | | | | | The function for setting up the RX frontend was erroneously looking at previous TX settings to determine whether to submit a command. This fixes the issue.
* rh: revise correction data usageMark Meserve2019-02-213-11/+19
| | | | | | | | | | - UHD's calibration utilities use the LO frequency, so this is the frequency we should be using too. - Disables loaded corrections in lowband, as the utilities will not generate valid corrections at these frequencies. Manual corrections can still be added via the property tree. - Changed corrections logging to include frequency and less certainty of the correction file's existence.
* rh: reset rx iq balance on initMark Meserve2019-02-211-0/+1
| | | | | - Fixes a bug where a previous setting could carry over between sessions.
* uhd: Replace all usage of boost::noncopyable with uhd::noncopyableMartin Braun2019-02-151-2/+2
| | | | | | This fixes the build errors that occur due to switching locations of noncopyable.hpp within Boost, and also allows us to remove boost::noncopyable in one fell swoop.
* rh: increase timeout of set_rate's rpc callMark Meserve2019-01-211-1/+4
|
* uhd: mpm: apply clang-format to all filesBrent Stapleton2019-01-1620-2574/+1926
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applying formatting changes to all .cpp and .hpp files in the following directories: ``` find host/examples/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/tests/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/dboard/neon/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/dboard/magnesium/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/device3/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/mpmd/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/x300/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/utils/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find mpm/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file ``` Also formatted host/include/, except Cpp03 was used as a the language standard instead of Cpp11. ``` sed -i 's/ Cpp11/ Cpp03/g' .clang-format find host/include/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file ``` Formatting style was designated by the .clang-format file.
* formatting: remove vim hints in headersBrent Stapleton2019-01-167-7/+0
| | | | | Remove trailing vim hints in header files. This functionality will be replaced by clang-format.
* uhd: skip formatting misc arrays, maps, etc.Brent Stapleton2019-01-164-1/+10
| | | | | | Various data structures are nicely formatted to be human-readable. clang-format makes these structures harder to read, so we can skip formatting these sections.
* rh: add support for identify argMark Meserve2019-01-102-12/+40
|
* rh: implement set_rateMark Meserve2019-01-103-9/+40
|
* rh: general code cleanupMark Meserve2019-01-101-4/+5
| | | | | | | | - Add default bandwidth range - Add default mash order constant - Delete MPM todos - Cleanup whitespace in MPM python code - Add docstring for is_lo_dist_present
* rh: add support for iq and dc correction filesMark Meserve2019-01-094-18/+88
| | | | | | | - Update corrections on frequency or LO source change - Add legacy EEPROM properties - Move DSP control initialization earlier - Fix TX antenna list property
* rh: adjust frequencies for lo filter bankMark Meserve2019-01-081-1/+1
| | | | | - Moves the cutover frequency for the 900 MHz LO filter from 900 to 975 MHz. This fixes an image issue in TX when transmitting near 325 MHz or 900 MHz.
* TwinRX: Fix tuningMichael West2019-01-021-1/+1
| | | | | - Set SPI clock back to 3 MHz - Fix returned frequency for ADF5355 (rev A and B boards)
* N310 E320: Add initialization of TX bandwidthmichael-west2018-12-192-2/+2
| | | | - Fixes "Error: map::at" errors (during calls to get_tx_bandwidth())
* uhd/mpm: eiscat: Various changesRyan Marlow2018-12-192-28/+219
| | | | | | | | | | | | | | - correct lmk initialization parameters - adding missing parameters and consts wrt clock synchronization. - fixed default master clock rate - eiscat, ddc: update xml. - remove references to CORDIC_FREQ in ddc_eiscat - update readback reg addr in radio_eiscat - set default spp from 3992 to 3968. - updated jesd mode sequence initialization - updating eiscat_radio_ctrl_impl - add rx_codecs to property tree to display correct ADC chip. - updated issue_stream_cmd
* rh: add highband spur reduction optionMark Meserve2018-12-124-4/+83
| | | | | | | | | - When highband_spur_reduction is enabled, the lowband LO will be disabled during highband operation. This improves spur performance, but also renders timed tune commands unusable due to the MPM call. - A warning is logged if the user uses a timed tune command that would change the state of the lowband LO, as the MPM call will occur immediately instead of at the given command time.
* TwinRX: Make routing to LO1 and LO2 mutually exclusivemichael-west2018-12-102-25/+15
|
* TwinRX: Tuning improvementsmichael-west2018-12-101-2/+7
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-145-20/+20
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 15:01:45 +0000